aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-11ide: use only ->set_pio_mode method for programming PIO modes (take 2)Bartlomiej Zolnierkiewicz
Use ->set_pio_mode method to program PIO modes in ide_set_xfer_rate() (the only place which used ->speedproc to program PIO modes) and remove handling of PIO modes from all ->speedproc implementations. v2: * Fix pmac_ide_tune_chipset() comment. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11sis5513: don't change UDMA settings when programming PIOBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11it8213/piix/slc90e66: don't change DMA settings when programming PIOBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11alim15x3: PIO mode setup fixesBartlomiej Zolnierkiewicz
* Return failure in ->speedproc method for unsupported/invalid transfer modes passed from user-space (fixes theoretical OOPS in ali_tune_pio() and/or setting random PIO timings on host controller + disabling UDMA bit + setting unsupported/invalid transfer mode on the device). * Don't disable UDMA bit when programming PIO modes. * Add FIXME about DMA timings never being set. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11siimage: fix ->set_pio_mode method to select PIO data transferBartlomiej Zolnierkiewicz
* Remember to select PIO data transfer (with IORDY monitored) in sil_tune_pio() (->set_pio_mode method) so the controller is always programmed correctly for PIO transfers (this is important if DMA is not going to be used). * Don't set DMA/UDMA timings for PIO modes in siimage_tune_chipset(). * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11cs5520: don't enable VDMA in ->speedprocBartlomiej Zolnierkiewicz
There is no need to do it in cs5520_tune_chipset() (->speedproc method) since it is correctly handled by cs5520_dma_on() (->ide_dma_on method). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11sc1200: remove redundant warning message from sc1200_tune_chipset()Bartlomiej Zolnierkiewicz
ide_config_drive_speed() called by sc1200_set_xfer_mode() already gives a meaningful warning message in case of failure. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide-pmac: PIO mode setup fixes (take 3)Bartlomiej Zolnierkiewicz
* Add { 0, 0 } entry to {kauai,shasta}_pio_timings[] so kauai_lookup_timing() always returns a valid PIO timing (fixes PIO timing not being set for devices with minimum PIO cycle <= 120ns). * Add setting transfer mode on the device to pmac_ide_set_pio_mode(). * Fix pmac_ide_set_pio() to always program chipset for given PIO timing instead of only when the device we want to program PIO timing for is the currently selected one. * Now that pmac_ide_set_pio() is fixed there is no need to set transfer mode on the device and program chipset for PIO in pmac_ide_tune_chipset() (returning 0 == success is not entirely correct but is OK for now since the upper layers are only checking ->speedproc return value for DMA modes). v2: * s/speed/XFER_PIO_0 + pio/ in pmac_ide_set_pio_mode() so it actually compiles. * Removal of kauai_lookup_timing() return value checking went to separate patch. v3: * Use XFER_PIO_0 not XFER_PIO. (Noticed by Ben) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11icside: fix ->speedproc to return on unsupported modes (take 5)Bartlomiej Zolnierkiewicz
* All other implementations of ->speedproc return zero on success and non-zero on failure. Currently it doesn't matter for icside host driver and isn't a bug per se since: - ide_set_xfer_rate() return value is ignored by all IDE core users - icside doesn't (yet!) use ide_tune_dma() in icside_dma_check() but sooner or later we will need to fix anyway - so lets do it now. * icside_set_speed() happily accepts unsupported transfer modes which results in drive->drive_data being set to the maximum value (480) and drive->current_speed being set to the unsupported transfer mode. Fix it. v2: * The initial version of the patch was broken because it didn't take into the account (the different from usual) return values of icside_set_speed() (Noticed by Russell). v3: * Remove no longer needed initialization/checking of cycle_time (Noticed by Sergei). * No need to set drive->drive_data if DMA is not going to be used (Noticed by Sergei). * Remove incorrect setting of drive->current_speed (Noticed by Sergei). * Move ide_config_drive_speed() at the end of icside_set_speed(). v4: * If DMA mode is not found in icside_dma_check() then just return "-1" and don't call icside_set_speed() (v3 got it wrong and "1" was returned instead). v5: * Return "-1"/"0" in icside_set_speed() instead of icside_dma_check() return value (just like it was before this patch). Cc: Russell King <rmk@arm.linux.org.uk> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11sgiioc4: use ide_tune_dma()Bartlomiej Zolnierkiewicz
* Add DRV_NAME define and use it instead of sgiioc4_chipset.name. * Remove no longer needed sgiioc4_chipset. * Remove needless clearing of ->atapi_dma from ide_dma_sgiioc4(). * Fix ide_dma_sgiioc4() to return success/failure. Check return value in sgiioc4_ide_setup_pci_device() and set hwif->autodma accordingly. Also add missing setting of drive->autodma. * Add sgiioc4_speedproc() (implementation of ->speedproc method). * Fix ->mwdma_mask (MWDMA2 mask is 0x04 not 0x02) and remove incorrect ->swdma_mask. Also remove needless initialization of ->ultra_mask. * Use ide_tune_dma() in sgiioc4_ide_dma_check(), this fixes following bugs: - DMA capability bit not being checked on the device - DMA blacklist not being checked - MWDMA2 mode support by device not being checked Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11amd74xx/via82cxxx: use ide_tune_dma()Bartlomiej Zolnierkiewicz
* Use ide_tune_dma() in amd74xx/via82cxxx driver, this fixes following bugs: - DMA capability bit not being checked on the device - DMA blacklist not being checked - DMA mode being programmed even if drive->autodma == 0 (thus possibly destroying PIO timings) * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: add ide_set{_max}_pio() (take 4)Bartlomiej Zolnierkiewicz
* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags and set them in ht6560, cmd640, cmd64x and sc1200 host drivers. * Add set_pio_mode_abuse() for checking if host driver has a non-standard ->tuneproc() implementation and use it in do_special(). * Add ide_set_pio() for setting PIO mode (it uses hwif->pio_mask to find the maximum PIO mode supported by the host), also add ide_set_max_pio() wrapper for ide_set_pio() to use for auto-tuning. Convert users of ->tuneproc to use ide_set{_max}_pio() where possible. This leaves only do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as a direct users of ->tuneproc. * Remove no longer needed ide_get_best_pio_mode() calls and printk-s reporting PIO mode selected from ->tuneproc implementations. * Rename ->tuneproc hook to ->set_pio_mode and make 'pio' argument const. * Remove stale comment from ide_config_drive_speed(). v2: * Fix "ata_" prefix (Noticed by Jeff). v3: * Minor cleanups/fixups per Sergei's suggestions. v4: * Fix compile problem in drivers/ide/pci/cmd640.c (Noticed by Andrew Morton). * Improve some ->set_pio_mode comments. Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: Kconfig face-liftBartlomiej Zolnierkiewicz
* Convert config options for PCI host drivers to select BLK_DEV_IDEPCI. * Same for BLK_DEV_IDEDMA_PCI and PCI DMA host drivers, also make this config option select BLK_DEV_IDEPCI. * Remove no longer needed help for BLK_DEV_IDEPCI and BLK_DEV_IDEDMA_PCI. * Remove redundant IDE_CHIPSETS config option. As a result of this patch users have now three less config options to worry about and can just select host drivers that they need (IDE config menu is "flatter"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: move ide_rate_filter() calls to the upper layer (take 2)Bartlomiej Zolnierkiewicz
* Move ide_rate_filter() calls from host drivers to IDE core. * Make ide_rate_filter() static. * Make 'speed' argument of ->speedproc const. v2: * Fix it8213_tune_chipset() comment. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11sis5513: add ->udma_filter method for chipset_family >= ATA_133Bartlomiej Zolnierkiewicz
* Add sis5513_ata133_udma_filter() for chipset_family >= ATA_133, use it to filter UDMA6 mode if ATA133 bit is disabled. * Remove no longer needed UDMA6 limiting logic from sis5513_tune_chipset(). * Bump driver version. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: mode limiting fixes for user requested speed changesBartlomiej Zolnierkiewicz
* Add an extra argument to ide_max_dma_mode() for passing requested transfer mode. Use it as an upper limit when finding the best DMA for device/host. * Rename ide_max_dma_mode() to ide_find_dma_mode() and at the same time add ide_max_dma_mode() wrapper which passes XFER_UDMA_6 as a requested mode to ide_find_dma_mode(). Also add inline ide_find_dma_mode() version for CONFIG_BLK_DEV_IDEDMA=n case. * Pass requested transfer mode from ide_find_dma_mode() to ide_get_mode_mask() to avoid false warning from eighty_ninty_three(). * Use ide_find_dma_mode() to limit the user requested transfer mode in ide_rate_filter(). Also limit the requested mode by host max PIO mode. Above changes make ide_rate_filter() to: * Clip desired transfer mode down if it is invalid (values 0x0F, 0x13-0x19 and 0x25-0x39, values > 0x46 were already clipped down, same for values 0x25-0x39 but iff UDMA was not supported by the host). * Clip desired transfer mode down if it is currently unsupported by IDE core (PIO6 and MWDMA3-4, the latter were already clipped down but iff UDMA was not supported by the host). * Clip desired transfer mode down according to the host capabilities (UDMA modes were already clipped down but MWDMA/SWDMA/PIO weren't, also ->atapi_dma flag was not respected). * Clip desired transfer mode down according to the device capabilities (except PIO modes for now which require mode work) - shouldn't be a problem since ide_set_xfer_rate() is called _after_ device has accepted given transfer mode. and also result in a number of host driver specific bugfixes: * icside - clip unsupported PIO5 mode down - fix unsupported/invalid modes being set in drive->current_speed * ide-cris - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices - fix BUG() on unsupported/invalid modes * au1xxx-ide - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2 (if BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=n) modes down * aec62xx - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices - fix 0x00 being programmed as PIO timing for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * alim15x3 - clip DMA modes down for ATAPI devices (chipset revision == 0x20 only) - fix theoretical OOPS for 0x0F mode - fix unsupported/invalid modes being set on the device * amd74xx - clip unsupported SWDMA0-2 (on COBRA_7401 revs <= 7) modes down - fix random PIO timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * atiixp - clip unsupported PIO5 and SWDMA0-2 modes down - fix cached MWDMA mode being cleared for unsupported/invalid modes - fix PIO{0,2} timings being programmed for unsupported/invalid modes - fix theoretical OOPS for PIO5-6 and 0x0F modes - fix unsupported/invalid modes being set on the device * cmd64x - clip unsupported SWDMA0-2 modes down * cs5530 - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device - fix BUG() on unsupported/invalid modes (which happened if the device accepted the setting) * cs5535 - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device - fix theoretical OOPS for PIO5-6 and 0x0F modes * hpt34x - clip DMA modes down for ATAPI devices - fix invalid timings being programmed for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * hpt366 - clip unsupported PIO5 and SWDMA0-2 modes down - fix PIO0 timings being programmed for unsupported/invalid modes - fix DMA timings being cleared for MWDMA3-4 and 0x25-0x39 modes - fix unsupported/invalid modes being set on the device * it8213 - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down * it821x - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices (chipset in smart mode and revision 0x10 in pass-through mode) * jmicron - clip unsupported SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device * pdc202xx_new - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device * pdc202xx_old - clip unsupported PIO5 mode down - fix incorrect timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * piix - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down * sc1200 - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device - fix BUG() on unsupported/invalid modes (which happened if the device accepted the setting) * scc_pata - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2 modes down * serverworks - clip unsupported PIO5 and SWDMA0-2 modes down - fix DMA/UDMA timings/settings being cleared for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * siimage - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices (SATA chipsets) * sis5513 - clip unsupported PIO5 mode down - fix BUG() on unsupported/invalid modes * sl82c105 - clip unsupported SWDMA0-2 modes down * slc90e66 - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down * tc86c001 - clip unsupported PIO5 and SWDMA0-2 modes down - fix PIO0 timings being programmed for PIO5/0x0F/SWDMA0-2/0x13-0x19 modes - fix invalid 0x00 DMA timing being programmed for MWDMA3-4/0x25-0x39 modes - fix unsupported/invalid modes being set on the device * triflex - clip unsupported PIO5 mode down * via82cxxx - fix random PIO timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * pmac - clip unsupported PIO5 and SWDMA0-2 modes down * cmd640/ht6560b - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y) - fix PIO5 being clipped to PIO4 (if CONFIG_BLK_DEV_IDEDMA=n) * opti621 - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y) - clip unsupported PIO4 to PIO3 (if CONFIG_BLK_DEV_IDEDMA=n) While at it: * Use ide_rate_filter() in cs5520.c::cs5520_tune_chipset(). * Remove no longer needed checks from hpt366.c::hpt3{6,7}x_tune_chipset(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: add missing ide_rate_filter() calls to ->speedproc()-sBartlomiej Zolnierkiewicz
* Fix icside, cris-ide, au1xxx-ide, amd74xx, via82cxxx and pmac host drivers to use ide_rate_filter(). This results in the following modes (from user requests) being clipped down: - invalid modes (values 0x46-0xFF) [ for all hosts ] - unsupported by a host UDMA modes [ for hosts which support UDMA] - all UDMA modes and MWDMA3-4 modes [ for hosts which don't support UDMA ] - invalid modes (values 0x25-0x39) [ for hosts which don't support UDMA ] * Host driver specific changes in behavior: icside: - no change cris-ide - clip unsupported UDMA3-6 modes down - fix BUG() on trying to set unsupported UDMA3-6 modes au1xxx-ide/pmac - clip unsupported UDMA modes down amd74xx/via82cxxx - clip unsupported UDMA modes down - fix random PIO timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * While at it remove no longer needed checks from pmac.c driver. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: call udma_filter() before resorting to the UltraDMA maskSergei Shtylyov
Give the udma_filter() method call precedence over using the mode masks. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: make jmicron match vendor and device classTejun Heo
PATA part of all current JMB controllers behave the same way and JMicron confirms that all future ones will stay compatible. Matching vendor and device class is enough. For backward compatibility, jmicron still needs to match 361,3,5,6,8 DIDs regardless of device class if libata is not configured but won't need further DID update from this point. Bart: cosmetic fixes to jmicron_chipset Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ethan Hsiao <ethanhsiao@jmicron.com> Cc: Justin Tsai <justin@jmicron.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11pdc202xx_new: switch to using pci_get_slot() (take 2)Sergei Shtylyov
Switch to using pci_get_slot() in init_setup_pdc20270() to get to the mate chip behind DC21150 bridge as there's no need for the driver itself to walk the list of the PCI devices (and the driver didn't check the bus # of the found device). While at it, make it emit warning about IRQ # being fixed up (just like hpt366.c does) and "beautify" this whole function as well as init_setup_pdc20276()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: hook ACPI _PSx method to IDE power on/offShaohua Li
ACPI spec defines the sequence of IDE power on/off: Powering down: Call _GTM. Power down drive (calls _PS3 method and turns off power planes). Powering up: Power up drive (calls _PS0 method if present and turns on power planes). Call _STM passing info from _GTM (possibly modified), with ID data from each drive. Initialize the channel. May modify the results of _GTF. For each drive: Call _GTF. Execute task file (possibly modified). This patch adds the missed _PS0/_PS3 methods call. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11ide: Platform IDE driverAnton Vorontsov
This is now very similar to pata_platform.c, they both use same platform data structure and same resources. To achieve that, byte_lanes_swapping platform data variable and platform specified iops removed from that driver. It's fine, since those were never used anyway. pata_platform and ide_platform are carrying same driver names, to easily switch between these drivers, without need to touch platform code. Bart: - build fix from Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11hpt366: MWDMA filter for SATA cards (take 2)Sergei Shtylyov
The Marvell bridge chips used on HighPoint SATA cards do not seem to support the MWDMA modes (at least that could be seen in their so-called drivers :-), so the driver needs to account for this -- to achieve this: - add mdma_filter() method from the original patch by Bartlomiej Zolnierkiewicz with his consent; - install the method for all chips to only return empty mask if a SATA drive is detected on HPT372{AN]/374 chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11atiixp: SB700 contains more than one IDE channelShane Huang
SB700 supports one physical IDE channel, but SB700 SATA controller supports combined mode. When the SATA combined mode is enabled, two SATA ports (port4 and port5) share one IDE channel from IDE controller, and PATA will share the other IDE channel. Our previous patch adding SB700 IDE device ID only supports one IDE channel, which contains bug. The attached patch fixes the bug. Signed-off-by: "Shane Huang" <Shane.Huang@amd.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-09Linux 2.6.23Linus Torvalds
2007-10-09Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Au1000: set the PCI controller IO base [MIPS] Alchemy: Fix USB initialization. [MIPS] IP32: Fix fatal typo in address computation.
2007-10-09NLM: Fix a memory leak in nlmsvc_testlockTrond Myklebust
The recent fix for a circular lock dependency unfortunately introduced a potential memory leak in the event where the call to nlmsvc_lookup_host fails for some reason. Thanks to Roel Kluin for spotting this. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-09sata_mv: correct S/G table limitsJeff Garzik
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-09[MIPS] Au1000: set the PCI controller IO baseFlorian Fainelli
The PCI controller IO base was not set in the au1000 pci code. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-09[MIPS] Alchemy: Fix USB initialization.Florian Fainelli
This patch fixes a wrong ifdef in the board setup code, leading to the GPIO pin not being pulled high, and thus the USB switch not being powered at all. This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which started in 2005 (before 2.6.12-rc2), then probably because things were working anyway for most people got forgotten. [Ralf: Paolo's original patch didn't fix the module case, Florian's patch only fixed MTX1 etc. so this is a combined patch plus some cleanups.] Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-09[MIPS] IP32: Fix fatal typo in address computation.Giuseppe Sacco
Signed-off-by: Giuseppe Sacco <eppesuig@debian.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-08Correct Makefile rule for generating custom keymapMaarten Bressers
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b128719f5248e542036ea994610a29d0642a6, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by: Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08ISDN: Fix data access out of array boundsKarsten Keil
Fix against access random data bytes outside the dev->chanmap array. Thanks to Oliver Neukum for pointing me to this issue. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Fix ICMPv6 redirect handling with target multicast address [PKT_SCHED] cls_u32: error code isn't been propogated properly [ROSE]: Fix rose.ko oops on unload [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed
2007-10-08AIO: fix cleanup in io_submit_one(...)Yan Zheng
When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect, statement 'goto out_put_req' is executed. At label 'out_put_req', aio_put_req(..) is called, which requires 'req->ki_filp' set. Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08fix page release issue in filemap_faultYan Zheng
find_lock_page increases page's usage count, we should decrease it before return VM_FAULT_SIGBUS Signed-off-by: Yan Zheng<yanzheng@21cn.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08fix VM_CAN_NONLINEAR check in sys_remap_file_pagesYan Zheng
The test for VM_CAN_NONLINEAR always fails Signed-off-by: Yan Zheng<yanzheng@21cn.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08mm: set_page_dirty_balance() vs ->page_mkwrite()Peter Zijlstra
All the current page_mkwrite() implementations also set the page dirty. Which results in the set_page_dirty_balance() call to _not_ call balance, because the page is already found dirty. This allows us to dirty a _lot_ of pages without ever hitting balance_dirty_pages(). Not good (tm). Force a balance call if ->page_mkwrite() was successful. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08[IPv6]: Fix ICMPv6 redirect handling with target multicast addressBrian Haley
When the ICMPv6 Target address is multicast, Linux processes the redirect instead of dropping it. The problem is in this code in ndisc_redirect_rcv(): if (ipv6_addr_equal(dest, target)) { on_link = 1; } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) { ND_PRINTK2(KERN_WARNING "ICMPv6 Redirect: target address is not link-local.\n"); return; } This second check will succeed if the Target address is, for example, FF02::1 because it has link-local scope. Instead, it should be checking if it's a unicast link-local address, as stated in RFC 2461/4861 Section 8.1: - The ICMP Target Address is either a link-local address (when redirected to a router) or the same as the ICMP Destination Address (when redirected to the on-link destination). I know this doesn't explicitly say unicast link-local address, but it's implied. This bug is preventing Linux kernels from achieving IPv6 Logo Phase II certification because of a recent error that was found in the TAHI test suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the multicast address in the Destination field instead of Target field, so we were passing the test. This won't be the case anymore. The patch below fixes this problem, and also fixes ndisc_send_redirect() to not send an invalid redirect with a multicast address in the Target field. I re-ran the TAHI Neighbor Discovery section to make sure Linux passes all 245 tests now. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07[PKT_SCHED] cls_u32: error code isn't been propogated properlyStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07[ROSE]: Fix rose.ko oops on unloadAlexey Dobriyan
Commit a3d384029aa304f8f3f5355d35f0ae274454f7cd aka "[AX.25]: Fix unchecked rose_add_loopback_neigh uses" transformed rose_loopback_neigh var into statically allocated one. However, on unload it will be kfree's which can't work. Steps to reproduce: modprobe rose rmmod rose BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 printing eip: c014c664 *pde = 00000000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: rose ax25 fan ufs loop usbhid rtc snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd thermal usbcore button processor evdev sr_mod cdrom CPU: 0 EIP: 0060:[<c014c664>] Not tainted VLI EFLAGS: 00210086 (2.6.23-rc9 #3) EIP is at kfree+0x48/0xa1 eax: 00000556 ebx: c1734aa0 ecx: f6a5e000 edx: f7082000 esi: 00000000 edi: f9a55d20 ebp: 00200287 esp: f6a5ef28 ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068 Process rmmod (pid: 1823, ti=f6a5e000 task=f7082000 task.ti=f6a5e000) Stack: f9a55d20 f9a5200c 00000000 00000000 00000000 f6a5e000 f9a5200c f9a55a00 00000000 bf818cf0 f9a51f3f f9a55a00 00000000 c0132c60 65736f72 00000000 f69f9630 f69f9528 c014244a f6a4e900 00200246 f7082000 c01025e6 00000000 Call Trace: [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a51f3f>] rose_exit+0x4c/0xd5 [rose] [<c0132c60>] sys_delete_module+0x15e/0x186 [<c014244a>] remove_vma+0x40/0x45 [<c01025e6>] sysenter_past_esp+0x8f/0x99 [<c012bacf>] trace_hardirqs_on+0x118/0x13b [<c01025b6>] sysenter_past_esp+0x5f/0x99 ======================= Code: 05 03 1d 80 db 5b c0 8b 03 25 00 40 02 00 3d 00 40 02 00 75 03 8b 5b 0c 8b 73 10 8b 44 24 18 89 44 24 04 9c 5d fa e8 77 df fd ff <8b> 56 08 89 f8 e8 84 f4 fd ff e8 bd 32 06 00 3b 5c 86 60 75 0f EIP: [<c014c664>] kfree+0x48/0xa1 SS:ESP 0068:f6a5ef28 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07[TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKedIlpo Järvinen
When only GSO skb was partially ACKed, no hints are reset, therefore fastpath_cnt_hint must be tweaked too or else it can corrupt fackets_out. The corruption to occur, one must have non-trivial ACK/SACK sequence, so this bug is not very often that harmful. There's a fackets_out state reset in TCP because fackets_out is known to be inaccurate and that fixes the issue eventually anyway. In case there was also at least one skb that got fully ACKed, the fastpath_skb_hint is set to NULL which causes a recount for fastpath_cnt_hint (the old value won't be accessed anymore), thus it can safely be decremented without additional checking. Reported by Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-07Driver core: fix SYSF_DEPRECATED breakage for nested classdevsDmitry Torokhov
We should only reparent to a class former class devices that form the base of class hierarchy. Nested devices should still grow from their real parents. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: point to migration document
2007-10-07Add manufacturer and card id of teltonica pcmcia modemsAttila Kinali
Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c Signed-off-by: Attila Kinali <attila@kinali.ch> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07sysrq docs: document sequence that actually worksPavel Machek
Document sequence of keypresses that actually works. Yes, this changed year-or-so ago. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07fix bogus reporting of signals by auditAl Viro
Async signals should not be reported as sent by current in audit log. As it is, we call audit_signal_info() too early in check_kill_permission(). Note that check_kill_permission() has that test already - it needs to know if it should apply current-based permission checks. So the solution is to move the call of audit_signal_info() between those. Bogosity in question is easily reproduced - add a rule watching for e.g. kill(2) from specific process (so that audit_signal_info() would not short-circuit to nothing), say load_policy, watch the bogus OBJ_PID entry in audit logs claiming that write(2) on selinuxfs file issued by load_policy(8) had somehow managed to send a signal to syslogd... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Steve Grubb <sgrubb@redhat.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Move kasprintf.o to obj-yAlexey Dobriyan
Modulat lguest started giving linking errors MODPOST 1 modules ERROR: "kasprintf" [drivers/lguest/lg.ko] undefined! Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07lockstat: documentationPeter Zijlstra
Provide some documentation for CONFIG_LOCK_STAT. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Rob Landley <rob@landley.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Longhaul: add auto enabled "revid_errata" optionRafal Bilski
VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0 or CPU will ignore new frequency and will continue to work at old frequency. New "revid_errata" option will force RevisionKey to be set to 0, whatever RevisionID is. Additionaly "Longhaul" will not silently ignore unsuccessful transition. It will try to check if "revid_errata" or "disable_acpi_c3" options need to be enabled for this processor/system. Same for Longhaul ver. 2 support. It will be disabled if none of above options will work. Best case scenario (with patch apllied and v2 enabled): longhaul: VIA C3 'Ezra' [C5C] CPU detected. Longhaul v2 supported. longhaul: Using northbridge support. longhaul: VRM 8.5 longhaul: Max VID=1.350 Min VID=1.050, 13 possible voltage scales longhaul: f: 300000 kHz, index: 0, vid: 1050 mV [...] longhaul: Voltage scaling enabled. Worst case scenario: longhaul: VIA C3 'Ezra-T' [C5M] CPU detected. Powersaver supported. longhaul: Using northbridge support. longhaul: Using ACPI support. longhaul: VRM 8.5 longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Disabling ACPI C3 support. longhaul: Disabling "Ignore Revision ID" option. longhaul: Failed to set requested frequency! longhaul: Enabling "Ignore Revision ID" option. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Rafal Bilski <rafalbilski@interia.pl> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 01:55:28 +0000