Age | Commit message (Collapse) | Author |
|
Return failure immediately, so we don't have to test it twice.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The patch below works around a minor bug found in the UART of the remote
management card used in many HP ia64 and parisc servers (aka the Diva
UARTs). The problem is that the UART does not reassert the THRE interrupt
if it has been previously cleared and the IIR THRI bit is re-enabled. This
can produce a very annoying failure mode when used as a serial console,
allowing a boot/reboot to hang indefinitely until an RX interrupt kicks it
into working again (ie. an unattended reboot could stall).
To solve this problem, a backup timer is introduced that runs alongside the
standard interrupt driven mechanism. This timer wakes up periodically,
checks for a hang condition and gets characters moving again. This backup
mechanism is only enabled if the UART is detected as having this problem,
so systems without these UARTs will have no additional overhead.
This version of the patch incorporates previous comments from Pavel and
removes races in the bug detection code. The test is now done before the
irq linking to prevent races with interrupt handler clearing the THRE
interrupt. Short delays and syncs are also added to ensure the device is
able to update register state before the result is tested.
Aristeu says:
this was tested on the following HP machines and solved the problem:
rx2600, rx2620, rx1600 and rx1620s.
hpa says:
I have seen this same bug in soft UART IP from "a major vendor."
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes showing empty config list items if "Option/Show All
Options" is turned on. For example empty items appears on list of 'Block
Layer' menu.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add new headers_check_all target for checking all arches in one go.
Useful for distros (and people with too much time on their hands) that support
a ton of architectures, headers_check_all is to headers_check as
headers_install_all is to headers_install
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Makefile
Remove references to the deprecated "make prepare-all" target from the
top-level Makefile; use just "make prepare" instead.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
qconf does not clear help text in search window if previous search has been
failed.
Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Relocate the qconf search command to the "Edit"->"Find" menu option.
This is per the discussion on my qconf search dialog patch.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.
This patch updates the descriptive text, when the corresponding value has
been changed. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744
Take2 uses updateList() so config values dependending on the changed value
see the change.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This list was built into the git-shortlog tool and has been removed in the
latest version. It should be maintained separately so this is what this
patch does.
A couple more entries were added to the original list as well.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Junio C Hamano <junkio@cox.net>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a minor bug in mkcompile_h. As one can see, the current locale is used
while getting the version of gcc. This produces problems when a locale
other than C or en_US is used. As an example, my /proc/version contains
Turkish characters in iso-8859-9 encoding.
This patch fixes this issue by making sure that the C locale is used to get
gcc's version.
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Check to see if `${CROSS_COMPILE}mkimage` exists and if not, fall back to
the standard `mkimage`
The Blackfin toolchain includes mkimage, but we dont want to namespace
collide with any of the user's system setup, so we prefix it with our
toolchain name.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On ia64, drivers/base/dma-mapping.c doesn't build because it calls
dma_alloc_noncoherent() and dma_free_noncoherent(), which appear to be
terminally broken; the calls end up generating errors like
drivers/base/dma-mapping.c: In function 'dmam_noncoherent_release':
drivers/base/dma-mapping.c:32: error: 'struct ia64_machine_vector' has no member named 'platform_dma_free_coherent'
because the multiple levels of macro expansion in <asm/dma-mapping.h> and
<asm/machvec.h> end up turning a call to dma_free_noncoherent() into
ia64_mv.platform_dma_free_coherent (instead of the intended
ia64_mv.dma_free_coherent).
This patch fixes this by converting dma_{alloc,free}_noncoherent() into
inline functions that call the corresponding coherent functions, instead of
trying to do this with macros.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
|
|
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/mthca: Always fill MTTs from CPU
IB/mthca: Merge MR and FMR space on 64-bit systems
IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs
IB/mthca: Give reserved MTTs a separate cache line
IB/mthca: Fix reserved MTTs calculation on mem-free HCAs
RDMA/cxgb3: Add driver for Chelsio T3 RNIC
IB: Remove redundant "_wq" from workqueue names
RDMA/cma: Increment port number after close to avoid re-use
IB/ehca: Fix memleak on module unloading
IB/mthca: Work around gcc bug on sparc64
IPoIB: Connected mode experimental support
IB/core: Use ARRAY_SIZE macro for mandatory_table
IB/mthca: Use correct structure size in call to memset()
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] on reconnect to Samba - reset the unix capabilities
[CIFS] Allow update of EOF on remote extend of file
[CIFS] POSIX CIFS Extensions (continued) - POSIX Open
[CIFS] Additional POSIX CIFS Extensions infolevels
|
|
After temporary server or network failure and reconneciton, we were not
resending the unix capabilities via SetFSInfo - which confused Samba posix
byte range locking code.
Discovered by jra
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[IPSEC]: Fix the address family to refer encap_family
[IPSEC]: changing API of xfrm6_tunnel_register
[IPSEC]: make sit use the xfrm4_tunnel_register
[IPSEC]: Changing API of xfrm4_tunnel_register.
[TCP]: Prevent pseudo garbage in SYN's advertized window
[NET_SCHED]: sch_hfsc: replace ASSERT macro by WARN_ON
[BRIDGE] br_if: Fix oops in port_carrier_check
[NETFILTER]: Clear GSO bits for TCP reset packet
[TG3]: Update copyright, version, and reldate.
[TG3]: Add some tx timeout debug messages.
[TG3]: Use constant for PHY register 0x1e.
[TG3]: Power down 5704 serdes transceiver when shutting down.
[TG3]: 5906 doesn't need to switch to slower clock.
[TG3]: 5722/5756 don't need PHY jitter workaround.
[TG3]: Use lower DMA watermark for 5703.
[TG3]: Save MSI state before suspend.
[XFRM]: Fix IPv4 tunnel mode decapsulation with IPV6=n
[IPV6] HASHTABLES: Use appropriate seed for caluculating ehash index.
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits)
[POWERPC] Use udbg_early_init() on ppc32
[POWERPC] Open Firmware serial port driver
[POWERPC] Move MPIC smp routines into mpic.c
[POWERPC] Cleanup pseries kexec code
[POWERPC] Cleanup pseries smp initialisation code
[POWERPC] Consolidate pseries platform header files into pseries.h
[POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
[POWERPC] cell: pm_rtas_activat_signals routine cleanup
[POWERPC] cell: PPU Oprofile cleanup patch
[POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
[POWERPC] spu sched: static timeslicing for SCHED_RR contexts
[POWERPC] spu sched: use DECLARE_BITMAP
[POWERPC] spu sched: forced preemption at execution
[POWERPC] spu sched: update some comments
[POWERPC] spu sched: simplity spu_remove_from_active_list
[POWERPC] spufs: optimize spu_run
[POWERPC] spufs: runqueue simplification
[POWERPC] spufs: move prio to spu_context
[POWERPC] spufs: state_mutex cleanup
[POWERPC] spufs: simplify state_mutex
...
|
|
udbg_early_init() is a function used on 64 bit systems, which
initializes whichever early udbg backend is configured. This function
is not called on 32-bit, however if btext early debug is enabled it
does have an explicit, inline, #ifdef-ed assignment performing
analagous initialization.
This patch makes things more uniform by folding the btext
initialization as an option into udbg_early_init() and calling that
from the 32-bit setup path.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.
In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Move a couple of MPIC smp routines into mpic.c, they're inside an SMP
block in mpic.c - so they're still only built for SMP.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Move all the pseries kexec code into one file, platforms/pseries/kexec.c
Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't
have to have #ifdef CONFIG_KEXEC in setup.c
Move the initialisation of the ppc_md kexec callbacks into an init routine.
This is well and truly early enough to cause no change in behaviour, we
can't kexec until userspace has given us a kernel to kexec into.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Move some extern declarations from setup.c into the new pseries.h.
While we're at it, provide dummy implementations for !SMP, to avoid
cluttering the C file with more #ifdefs.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
Following the example of platforms/pasemi, consolidate a couple of
tiny header files in platforms/pseries into pseries.h.
This gives us a convenient place to put things that need to be
available to the platform code, but not public. And hopefully will
help people resist the temptation of sticking externs in C files.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arnd/cell-2.6
|
|
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c: Stop using i2c_adapter.class_dev
i2c: Remove the warning on missing adapter device
i2c: Declare more i2c_adapter parent devices
i2c: PA Semi SMBus driver
i2c-amd8111: Proposed cleanups
i2c-parport: Add support for One For All remote JP1 interface
i2c-viapro: Add support for the VIA CX700 south bridge
i2c: Add IDs to adapters
i2c: Update the list of bus IDs
i2c: Add driver suspend/resume/shutdown support
i2c: completion header cleanups
i2c-i801: Document the SMBus unhiding quirk
i2c-i801: Spelling fix
i2c: Fix typo in SMBus Write Word Data description
i2c-piix4: Add support for the ATI SB600
i2c-nforce2: Drop unused reference to pci_dev
i2c/vt8231: Remove superfluous initialization
i2c-ali1563: Fix device initialization
i2c-ali1563: Improve the status messages
|
|
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
[MIPS] Fix uniprocessor Sibyte builds.
[MIPS] Make entry.S a little more readable.
[MIPS] Remove stray instruction from __get_user_asm_ll32.
[MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.
[MIPS] DECstation: Fix irq handling
[MIPS] signals: make common _BLOCKABLE macro
[MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
[MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
[MIPS] signal: Fix warnings in o32 compat code.
[MIPS] IP27: Enable N32 support in defconfig.
Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."
[MIPS] Don't claim we support dma_declare_coherent_memory - we don't.
[MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
[MIPS] Improve branch prediction in ll/sc atomic operations.
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (23 commits)
[WATCHDOG] timers cleanup
[WATCHDOG] ib700wdt.c - convert to platform_device part 2
[WATCHDOG] ib700wdt.c - convert to platform_device
[WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes
[WATCHDOG] ib700wdt.c small clean-up's
[WATCHDOG] ib700wdt.c clean-up init and exit routines
[WATCHDOG] ib700_wdt.c stop + set_heartbeat operations
[WATCHDOG] show default value for nowayout in module parameter
[WATCHDOG] advantechwdt.c - convert to platform_device part 2
[WATCHDOG] advantechwdt.c - convert to platform_device
[WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function
[WATCHDOG] advantechwdt.c - cleanup before platform_device patches
[WATCHDOG] acquirewdt.c - convert to platform_device part 2
[WATCHDOG] acquirewdt.c - convert to platform_device
[WATCHDOG] acquirewdt.c - clean before platform_device patches
[WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
[WATCHDOG] pcwd.c - e-mail adres update
[WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
[WATCHDOG] pcwd_usb.c - document includes
[WATCHDOG] pcwd_pci.c - spinlock fixes
...
|
|
Somewhere in the rewrite of the work queues my cleanup of SAK handling
got broken. Maybe I didn't retest it properly or possibly the API
was changing so fast I missed something. Regardless currently
triggering a SAK now generates an ugly BUG_ON and kills the kernel.
Thanks to Alexey Dobriyan <adobriyan@openvz.org> for spotting this.
This modifies the use of SAK_work to initialize it when the data
structure it resides in is initialized, and to simply call
schedule_work when we need to generate a SAK. I update both
data structures that have a SAK_work member for consistency.
All of the old PREPARE_WORK calls that are now gone.
If we call schedule_work again before it has processed it
has generated the first SAK it will simply ignore the duplicate
schedule_work request.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Andrew Sharp <tigerand@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When CONFIG_PREEMPT is not set, it also moves one branch instruction from
ret_from_irq() to ret_from_exception(). Therefore we favour the return
from irq case which should be more common than the other one.
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This did result in double clearing of the error return value on success
only but should make a meassurable overhead for sigreturn.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When I post a patch (commit f431baa55abf8adeed0c718b51deacbc151f58f1),
I just tried to not change behavior of existing codes, but it seems
dec/int-handler.S had been broken since its previous commit
937a801576f954bd030d7c4a5a94571710d87c0b.
The caller of plat_irq_dispatch do setup/restore TI_REGS($28), so
dec's plat_irq_dispatch should not do it, and there is no need to
adjust RA.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
userspace."
This reverts commit 4ed3a77f38c023658784804cb39a7ce18063dc88.
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Platforms will now have to supply a function dma_device_is_coherent which
returns if a particular device participates in the coherence domain. For
most platforms this function will always return 0 or 1.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Now that finally all supported versions of binutils have functioning
support for .subsection use .subsection to tweak the branch prediction
I did not modify the R10000 errata variants because it seems unclear if
this will invalidate the workaround which actually relies on the cheesy
prediction of branch likely to cause a misspredict if the sc was
successful.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
|
|
|
|
Eliminate needless invocation of the SYNC macro (which always evaluates to
nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc).
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Stop using i2c_adapter.class_dev, as it is going to be removed
soon. Luckily, there are only 4 RTC drivers affected.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
|
|
Now that the i2c_adapter migration plan changed and we are going to
keep i2c_adapter.dev, it's no longer that urgent to add a proper device
to all i2c_adapter drivers. Thus is seems resonable to degrade the
warning asking authors to migrate their driver to a debug message.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|