aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-08-13V4L/DVB (12403): em28xx: properly reports some em2710 chipsMauro Carvalho Chehab
As reported by hermann pitton <hermann-pitton@arcor.de>, some devices has a different chip id for em2710 (likely the older ones): em28xx: New device @ 480 Mbps (eb1a:2710, interface 0, class 0) em28xx #0: Identified as EM2710/EM2750/EM2751 webcam grabber (card=22) em28xx #0: em28xx chip ID = 17 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12402): em28xx: fix: some em2710 chips use a different vendor IDMauro Carvalho Chehab
Thanks to hermann pitton <hermann-pitton@arcor.de> for pointing this new variation. Tested-by: hermann pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12401): m9v011: add vflip/hflip controls to control mirror/upside downMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12400): em28xx: Allow changing fps on webcamsMauro Carvalho Chehab
em28xx doesn't have temporal scaling. However, on webcams, sensors are capable of changing the output rate. So, VIDIOC_[G|S]_PARM ioctls should be passed to the sensor for it to properly set frame rate. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12399): mt9v011: Add support for controlling frame ratesMauro Carvalho Chehab
Implement g_parm/s_parm ioctls. Those are used to check the current frame rate (in fps) and to set it to a value. In practice, there are only 15 possible different speeds, due to chip limits. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12394): cx88: Disable xc3028 power management for Geniatech x8000Devin Heitmueller
A user discovered that the Geniatech x8000 encountered a regression when the xc3028 power management was introduced. The xc3028 never recovers after setting the powerdown register, which is probably because the xc3028 reset GPIO is not properly configured. Since I do not have access to the hardware and thus cannot determine the correct GPIO configuration, just disable xc3028 power management on this board, which fixes the regression. Thanks to user "ritec" for reporting the issue and testing the fix. Cc: rictec <rictec@netcabo.pt> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12393): cx88: fix regression in tuning for Geniatech X8000 MTDevin Heitmueller
The introduction of the zl10353 i2c gate control broke support for the Geniatech board (which is not behind an i2 gate). Add the needed parameter. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12391): saa7134: Use correct product name for Hauppauge ↵Michael Krufky
WinTV-HVR1120 DVB-T/Hybrid Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12390): saa7134: Use correct product name for Hauppauge ↵Michael Krufky
WinTV-HVR1150 ATSC/QAM-Hybrid Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12386): sms1xxx: fix build warning: unused variable 'board'Michael Krufky
Remove the following build warning: sms-cards.c: In function 'sms_board_event': sms-cards.c:120: warning: unused variable 'board' Thanks to Hans Verkuil for pointing this out. The problem code has been #if 0'd for now, this will likely be used again in the future, once the event interface is complete. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12380): uvcvideo: Avoid flooding the kernel log with "unknown event ↵Laurent Pinchart
type" messages The iSight sends non-UVC status events through the interrupt endpoint. Those invalid events are reported to the kernel log, resulting in a log flood. Only log the events when the UVC_TRACE_STATUS flag is set. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12328): uvcvideo: Don't apply the FIX_BANDWIDTH quirk to all ↵Laurent Pinchart
ViMicro devices Commit 50144aeeb702ea105697ae5249f059ea3990b838 broke the Samsung NC10 netbook webcam. Instead of applying the FIX_BANDWIDTH quirk to all ViMicro devices, list the devices explicitly. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12374): sms1xxx: fix broken Hauppauge devicesMichael Krufky
The current GPIO configuration breaks all Hauppauge devices. The code being removed affects Hauppauge devices only, and is the cause of the breakage. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12373a): Add gspca sn9c20x subdriver entry to MAINTAINERS fileBrian Johnson
MAINTAINERS | 8 ++++++++ Signed-off-by: Brian Johnson <brijohn@gmail.com> Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12371): af9015: Fix for crash in dvb-usb-af9015Nils Kassube
Moving BOOT fixes problem. Signed-off-by: Nils Kassube <kassube@gmx.net> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12362): cx23885-417: fix manipulation of tvnormsMichael Krufky
Currently, the VIDIOC_S_STD ioctl just returns -EINVAL regardless of the norm passed. This patch sets cx23885_mpeg_template.tvnorms and cx23885_mpeg_template.current_norm so that the VIDIOC_S_STD will work. Thanks to Joseph Yasi for pointing this out, even though this particular fix was already pushed into a development repository, merge priority of this changeset has been escalated as a result of Joseph posting this identical patch. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Joseph A. Yasi <joe.yasi@gmail.com> Reviewed-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12349): cx88: HVR1300 ensure switching from Encoder to DVB-T and ↵Sohail Syyed
back is reliable Current tip is broken and does not switch back to DVB-T correctly Signed-off-by: Sohail Syyed <linuxtv@hubstar.net> Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12344): em28xx: fix support for Plextor ConvertX PX-TV100UMauro Carvalho Chehab
This device uses msp34xx and uses 2.048 MHz frequency for I2S communication. Thanks to Angelo Cano <acano@fastmail.fm> for pointing the issues with this device and proposing an approach for fixing the issue. Tested-by: Angelo Cano <acano@fastmail.fm> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12341): zl10353 and qt1010: fix stack corruption bugJan Nikitenko
Fixes stack corruption bug present in dump_regs function of zl10353 and qt1010 drivers: the buffer buf was one byte smaller than required - there are 4 chars for address prefix, 16 * 3 chars for dump of 16 eeprom bytes per line and 1 byte for zero ending the string required, i.e. 53 bytes, but only 52 were provided. The one byte missing in stack based buffer buf can cause stack corruption possibly leading to kernel oops, as discovered originally with af9015 driver (af9015: fix stack corruption bug). Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12340): mtv9v011: Add a missing chip version to the driverMauro Carvalho Chehab
Some mt9v011 webcams report 0x8332 chip version, instead of 0x8243. From the revision history at the mt9v011 datasheet, it seems that the chip version has changed from the first release of the chip. Thanks-to hermann pitton <hermann-pitton@arcor.de> for pointing this to me, on his tests with a Silvercrest webcam. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12338): cx18: Read buffer overflowAndy Walls
This mistakenly tested against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12337): ivtv: Read buffer overflowRoel Kluin
This mistakenly tests against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12330): pxa_camera: Fix Oops in pxa_camera_probeAntonio Ospite
mclk_get_divisor uses pcdev->soc_host.dev, make sure it is initialized. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13netxen: free napi resources during detachDhananjay Phadke
o Defer napi resouce allocation to device attach. o Free napi resources and delete napi during detach. This ensures right behavior across firmware reset. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13netxen: remove netxen workqueueAmit Kumar Salecha
o Remove private workqueue in the driver, move all scheduled tasks to keventd workqueues. This makes ports (interfaces) of same / different NIC boards independent, in terms of their link watchdog and reset tasks. o Move quick checks for link status and temperature in timer callback, schedule watchdog task only if link status changed or temperature reached critical threshold. This also fixes deadlock when thermal panic occurs, watchdog work was flushing workqueue that it was sitting on. Signed-off-by: Amit Kumar Salecha <amit@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13ixgbe: fix issues setting rx-usecs with legacy interruptsDon Skidmore
Currently setting rx-usecs when the interface is in legacy interrupt mode it is not immediate. We were only setting EITR for each MSIx vector and since this count would be zero for legacy mode it wasn't set until after a reset. This patch corrects that by checking what mode we are in and then setting EITR accordingly. Signed-off-by: Don Skidmore <donald.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13can: fix oops caused by wrong rtnl newlink usageOliver Hartkopp
For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created with the ip tool ... The invocation of 'ip link add type can' lead to an oops as the standard rtnl newlink function was called: http://bugzilla.kernel.org/show_bug.cgi?id=13954 This patch adds a private newlink function for the CAN device driver interface that unconditionally returns -EOPNOTSUPP. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: Patrick McHardy <kaber@trash.net> CC: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13Linux 2.6.31-rc6Linus Torvalds
2009-08-13genirq: prevent wakeup of freed irq threadLinus Torvalds
free_irq() can remove an irqaction while the corresponding interrupt is in progress, but free_irq() sets action->thread to NULL unconditionally, which might lead to a NULL pointer dereference in handle_IRQ_event() when the hard interrupt context tries to wake up the handler thread. Prevent this by moving the thread stop after synchronize_irq(). No need to set action->thread to NULL either as action is going to be freed anyway. This fixes a boot crash reported against preempt-rt which uses the mainline irq threads code to implement full irq threading. [ tglx: removed local irqthread variable ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-13Merge branch 'perfcounters-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Report the cloning task as parent on perf_counter_fork() perf_counter: Fix an ipi-deadlock perf: Rework/fix the whole read vs group stuff perf_counter: Fix swcounter context invariance perf report: Don't show unresolved DSOs and symbols when -S/-d is used perf tools: Add a general option to enable raw sample records perf tools: Add a per tracepoint counter attribute to get raw sample perf_counter: Provide hw_perf_counter_setup_online() APIs perf list: Fix large list output by using the pager perf_counter, x86: Fix/improve apic fallback perf record: Add missing -C option support for specifying profile cpu perf tools: Fix dso__new handle() to handle deleted DSOs perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available perf report: Show the tid too in -D perf record: Fix .tid and .pid fill-in when synthesizing events perf_counter, x86: Fix generic cache events on P6-mobile CPUs perf_counter, x86: Fix lapic printk message
2009-08-13Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix handling of bad requeue syscall pairing futex: Fix compat_futex to be same as futex for REQUEUE_PI locking, sched: Give waitqueue spinlocks their own lockdep classes futex: Update futex_q lock_ptr on requeue proxy lock
2009-08-13Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix oops in identify_cpu() on CPUs without CPUID x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag x86, mce: therm_throt - change when we print messages x86: Add reboot quirk for every 5 series MacBook/Pro
2009-08-13mac80211: fix panic when splicing unprepared TIDsLuis R. Rodriguez
We splice skbs from the pending queue for a TID onto the local pending queue when tearing down a block ack request. This is not necessary unless we actually have received a request to start a block ack request (rate control, for example). If we never received that request we should not be splicing the tid pending queue as it would be null, causing a panic. Not sure yet how exactly we allowed through a call when the tid state does not have at least HT_ADDBA_REQUESTED_MSK set, that will require some further review as it is not quite obvious. For more information see the bug report: http://bugzilla.kernel.org/show_bug.cgi?id=13922 This fixes this oops: BUG: unable to handle kernel NULL pointer dereference at 00000030 IP: [<f8806c70>] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] *pdpt = 0000000002d1e001 *pde = 0000000000000000 Thread overran stack, or stack corrupted Oops: 0000 [#1] SMP last sysfs file: /sys/module/aes_generic/initstate Modules linked in: <bleh> Pid: 0, comm: swapper Not tainted (2.6.31-rc5-wl #2) Dell DV051 EIP: 0060:[<f8806c70>] EFLAGS: 00010292 CPU: 0 EIP is at ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] EAX: 00000030 EBX: 0000004c ECX: 00000003 EDX: 00000000 ESI: c1c98000 EDI: f745a1c0 EBP: c076be58 ESP: c076be38 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=c076a000 task=c0709160 task.ti=c076a000) Stack: <bleh2> Call Trace: [<f8806edb>] ? ieee80211_stop_tx_ba_cb+0xab/0x150 [mac80211] [<f8802f1e>] ? ieee80211_tasklet_handler+0xce/0x110 [mac80211] [<c04862ff>] ? net_rx_action+0xef/0x1d0 [<c0149378>] ? tasklet_action+0x58/0xc0 [<c014a0f2>] ? __do_softirq+0xc2/0x190 [<c018eb48>] ? handle_IRQ_event+0x58/0x140 [<c01205fe>] ? ack_apic_level+0x7e/0x270 [<c014a1fd>] ? do_softirq+0x3d/0x40 [<c014a345>] ? irq_exit+0x65/0x90 [<c010a6af>] ? do_IRQ+0x4f/0xc0 [<c014a35d>] ? irq_exit+0x7d/0x90 [<c011d547>] ? smp_apic_timer_interrupt+0x57/0x90 [<c01094a9>] ? common_interrupt+0x29/0x30 [<c010fd9e>] ? mwait_idle+0xbe/0x100 [<c0107e42>] ? cpu_idle+0x52/0x90 [<c054b1a5>] ? rest_init+0x55/0x60 [<c077492d>] ? start_kernel+0x315/0x37d [<c07743ce>] ? unknown_bootoption+0x0/0x1f9 [<c0774099>] ? i386_start_kernel+0x79/0x81 Code: <bleh3> EIP: [<f8806c70>] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] SS:ESP 0068:c076be38 CR2: 0000000000000030 Cc: stable@kernel.org Testedy-by: Jack Lau <jackelectronics@hotmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-13Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits) ocfs2: Fix possible deadlock when extending quota file ocfs2: keep index within status_map[] ocfs2: Initialize the cluster we're writing to in a non-sparse extend ocfs2: Remove redundant BUG_ON in __dlm_queue_ast() ocfs2/quota: Release lock for error in ocfs2_quota_write. ocfs2: Define credit counts for quota operations ocfs2: Remove syncjiff field from quota info ocfs2: Fix initialization of blockcheck stats ocfs2: Zero out padding of on disk dquot structure ocfs2: Initialize blocks allocated to local quota file ocfs2: Mark buffer uptodate before calling ocfs2_journal_access_dq() ocfs2: Make global quota files blocksize aligned ocfs2: Use ocfs2_rec_clusters in ocfs2_adjust_adjacent_records. ocfs2: Fix deadlock on umount ocfs2: Add extra credits and access the modified bh in update_edge_lengths. ocfs2: Fail ocfs2_get_block() immediately when a block needs allocation ocfs2: Fix error return in ocfs2_write_cluster() ocfs2: Fix compilation warning for fs/ocfs2/xattr.c ocfs2: Initialize count in aio_write before generic_write_checks ocfs2: log the actual return value of ocfs2_file_aio_write() ...
2009-08-13Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: allow upper limit for resync/reshape to be set when array is read-only md/raid5: Properly remove excess drives after shrinking a raid5/6 md/raid5: make sure a reshape restarts at the correct address. md/raid5: allow new reshape modes to be restarted in the middle. md: never advance 'events' counter by more than 1. Remove deadlock potential in md_open
2009-08-13Merge branch 'sh/for-2.6.31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: fix i2c init order on ap325rxa V2 sh: fix i2c init order on Migo-R V2 sh: convert processor device setup functions to arch_initcall()
2009-08-13Make sock_sendpage() use kernel_sendpage()Linus Torvalds
kernel_sendpage() does the proper default case handling for when the socket doesn't have a native sendpage implementation. Now, arguably this might be something that we could instead solve by just specifying that all protocols should do it themselves at the protocol level, but we really only care about the common protocols. Does anybody really care about sendpage on something like Appletalk? Not likely. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Julien TINNES <julien@cr0.org> Acked-by: Tavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-13perf_counter: Report the cloning task as parent on perf_counter_fork()Peter Zijlstra
A bug in (9f498cc: perf_counter: Full task tracing) makes profiling multi-threaded apps it go belly up. [ output as: (PID:TID):(PPID:PTID) ] # ./perf report -D | grep FORK 0x4b0 [0x18]: PERF_EVENT_FORK: (3237:3237):(3236:3236) 0xa10 [0x18]: PERF_EVENT_FORK: (3237:3238):(3236:3236) 0xa70 [0x18]: PERF_EVENT_FORK: (3237:3239):(3236:3236) 0xad0 [0x18]: PERF_EVENT_FORK: (3237:3240):(3236:3236) 0xb18 [0x18]: PERF_EVENT_FORK: (3237:3241):(3236:3236) Shows us that the test (27d028d perf report: Update for the new FORK/EXIT events) in builtin-report.c: /* * A thread clone will have the same PID for both * parent and child. */ if (thread == parent) return 0; Will clearly fail. The problem is that perf_counter_fork() reports the actual parent, instead of the cloning thread. Fixing that (with the below patch), yields: # ./perf report -D | grep FORK 0x4c8 [0x18]: PERF_EVENT_FORK: (1590:1590):(1589:1589) 0xbd8 [0x18]: PERF_EVENT_FORK: (1590:1591):(1590:1590) 0xc80 [0x18]: PERF_EVENT_FORK: (1590:1592):(1590:1590) 0x3338 [0x18]: PERF_EVENT_FORK: (1590:1593):(1590:1590) 0x66b0 [0x18]: PERF_EVENT_FORK: (1590:1594):(1590:1590) Which both makes more sense and doesn't confuse perf report anymore. Reported-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: paulus@samba.org Cc: Anton Blanchard <anton@samba.org> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1250172882.5241.62.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13perf_counter: Fix an ipi-deadlockPeter Zijlstra
perf_pending_counter() is called from IRQ context and will call perf_counter_disable(), however perf_counter_disable() uses smp_call_function_single() which doesn't fancy being used with IRQs disabled due to IPI deadlocks. Fix this by making it use the local __perf_counter_disable() call and teaching the counter_sched_out() code about pending disables as well. This should cover the case where a counter migrates before the pending queue gets processed. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> LKML-Reference: <20090813103655.244097721@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13perf: Rework/fix the whole read vs group stuffPeter Zijlstra
Replace PERF_SAMPLE_GROUP with PERF_SAMPLE_READ and introduce PERF_FORMAT_GROUP to deal with group reads in a more generic way. This allows you to get group reads out of read() as well. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> LKML-Reference: <20090813103655.117411814@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13perf_counter: Fix swcounter context invariancePeter Zijlstra
perf_swcounter_is_counting() uses a lock, which means we cannot use swcounters from NMI or when holding that particular lock, this is unintended. The below removes the lock, this opens up race window, but not worse than the swcounters already experience due to RCU traversal of the context in perf_swcounter_ctx_event(). This also fixes the hard lockups while opening a lockdep tracepoint counter. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Corey J Ashford <cjashfor@us.ibm.com> LKML-Reference: <1250149915.10001.66.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13perf report: Don't show unresolved DSOs and symbols when -S/-d is usedArnaldo Carvalho de Melo
We're interested in just those symbols/DSOs, so filter out the unresolved ones. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090812211957.GE3495@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13Merge branch 'ixp4xx-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6
2009-08-13perf tools: Add a general option to enable raw sample recordsFrederic Weisbecker
While we can enable the perf sample records per tracepoint counter, we may also want to enable this option for every tracepoint counters to open, so that we don't need to add a :record flag for all of them. Add the -R, --raw-samples options for this purpose. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250152039-7284-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13perf tools: Add a per tracepoint counter attribute to get raw sampleFrederic Weisbecker
Add a new flag field while opening a tracepoint perf counter: -e tracepoint_subsystem:tracepoint_name:flags This is intended to be generic although for now it only supports the r[e[c[o[r[d]]]]] flag: ./perf record -e workqueue:workqueue_insertion:record ./perf record -e workqueue:workqueue_insertion:r will have the same effect: enabling the raw samples record for the given tracepoint counter. In the future, we may want to support further flags, separated by commas. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13perf_counter: Provide hw_perf_counter_setup_online() APIsIngo Molnar
Provide weak aliases for hw_perf_counter_setup_online(). This is used by the BTS patches (for v2.6.32), but it interacts with fixes so propagate this upstream. (it has no effect as of yet) Also export perf_counter_output() to architecture code. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-13perf list: Fix large list output by using the pagerArnaldo Carvalho de Melo
When /sys/kernel/debug is mounted the list can be imense, so use the pager like the other tools. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090812174459.GB3495@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-128139cp: balance dma_map_single vs dma_unmap_single pairFrancois Romieu
The driver always: 1. allocate cp->rx_buf_sz + NET_IP_ALIGN 2. map cp->rx_buf_sz Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13drm: fixup include file in drm_encoder_slaveDave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-13sh: fix i2c init order on ap325rxa V2Magnus Damm
Convert the AP325RXA board code to register devices at arch_initcall() time instead of device_initcall(). This fix unbreaks pcf8563 RTC driver support. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 06:08:54 +0000