aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-02scsi disk help file is not completeRandy Dunlap
On Mon, 11 Jun 2007 20:28:16 +0200 api wrote: > Good day, > When doing make menuconfig one comes across CONFIG_BLK_DEV_SD. > The help file states that this is for scsi disks.NO MENTION IS MADE THAT > IT IS NEEDE FOR SATA DISKS AS WELL! > Would have saved me a lot of time if the help was up to date. > I hope this can be changed so others can make a kernel for sata systems > quicker. From: Randy Dunlap <randy.dunlap@oracle.com> Add help info for BLK_DEV_SD referring to its use in SATA or PATA driver configurations. Add help text for "ATA" indicating that it probably needs some SCSI config symbols enabled in order to be useful. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02[ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resumeRichard Purdie
The PXA CKEN changes broken syspend/resume on the pxa27x. This patch corrects the problem and fixes another couple of bad references. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-02[ARM] 4454/1: Use word accesses in Versatile PCI config readsAndrzej Zaborowski
ARM Versatile PCI config reads of one byte width have the lowest two bits of the address cleared and result in reading from a wrong place in the config space. This change is to use word size accesses like it is done for halfword reads. Byte reads are used for retrieving the IRQ number of a PCI device and the problem was not exposed until 2.6.20 because the value read was discarded in drivers/pci/setup-irq.c (recently fixed). Signed-off-by: Andrzej Zaborowski <andrew@openedhand.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-02RESEND [PATCH 3/3] NetXen: Graceful teardown of interface and hardware upon ↵Dhananjay Phadke
module unload Resending patch 3/3 only. These changes allow driver close routine to be called during module unload, to clean-up buffers and other software resources, flush queues etc. Also, hardware is reset to pristine state. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02drivers/net/ns83820.c: fix a check-after-useAdrian Bunk
This patch fixes a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02net/usb/cdc_ether minor sparse cleanupDavid Brownell
Remove an "sparse" warning about a shadowed variable name. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02RESEND [PATCH 2/3] NetXen: Support per PCI-function interrupt mask registersdhananjay.phadke@gmail.com
This patch updates the various access routines to access different control and status settings present in different register locations. This will fix problems related to working of different ports in multi Port card. Signed-off by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off by: Milan Bag <mbag@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02RESEND [PATCH 1/3] NetXen: Fix issue of MSI not working correctlydhananjay.phadke@gmail.com
NetXen driver uses PCI function 0 to provide the functionality of MSI. The patch makes driver check the bus master bit for function 0 and enable it after the card initialization. Signed-off-by: Dhananjay Phadke<dhananjay@netxen.com> Signed-off-by: Milan Bag <mbag@netxen.com> Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02dm9601: Return 0 from bind() on successPeter Korsgaard
Fixup dm9601_bind() so it returns 0 on success rather than just a positive number, as otherwise usbnet doesn't init the status handler. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02Update MAINTAINERS for USB network devicesPeter Korsgaard
>>>>> "Greg" == Greg KH <greg@kroah.com> writes: Greg> Yeah, this is the cdc_acm driver that is still in the USB drivers/ Greg> directory tree as it is a USB class driver that shows up as a tty device Greg> to userspace. It should not be moved to the networking list unless no Greg> one minds that I never see any queries about it :) Ok, here's an updated patch: Questions regarding the USB network drivers should now go to netdev. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02usbnet: Zero padding byte if there is tail room in skbPeter Korsgaard
Usbnet adds a padding byte if a 0 byte USB packet would be sent. Zero padding byte if there is tail room in skb. Signed-of-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02dm9601: HW header size shouldn't be included in packet lengthPeter Korsgaard
The dm9601 driver was including the 2 byte hardware header in the packet length, causing the HW to send 2 extra bytes of garbage on tx. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02starfire list alpha as 64 bit archmaximilian attems
instead of: "This driver has not been ported to this 64-bit architecture yet." the driver is said to work on alpha, see http://bugs.debian.org/305330 Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02myri10ge: SET_NETDEV_DEV()Maik Hampel
SET_NETDEV_DEV() in myri10ge to create the "/sys/class/net/<if>/device" symlink. Signed-off-by: Maik Hampel <m.hampel@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02Merge branch 'for_linus' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into upstream-fixes
2007-07-02Merge branch 'libertas-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-07-02Blackfin arch: update board defconfig filesMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-02[POWERPC] Update defconfigsKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-02[POWERPC] Uninline and export virq_to_hw() for the pasemi_mac driverOlof Johansson
Uninline virq_to_hw and export it so modules can use it. The alternative would be to export the irq_map array instead, but it's an infrequently called function, and keeping the array unexported seems considerably cleaner. This is needed so that the pasemi_mac driver can be compiled as a module. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-02[POWERPC] Fix PMI breakage in cbe_cbufreq driverChristian Krafft
The recent change to cell_defconfig to enable cpufreq on Cell exposed the fact that the cbe_cpufreq driver currently needs the PMI interface code to compile, but Kconfig doesn't make sure that the PMI interface code gets built if cbe_cpufreq is enabled. In fact cbe_cpufreq can work without PMI, so this ifdefs out the code that deals with PMI. This is a minimal solution for 2.6.22; a more comprehensive solution will be merged for 2.6.23. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-02[POWERPC] Disable old EMAC driver in arch/powerpcDavid Gibson
The EMAC driver, in drivers/net/ibm_emac, for the embedded Ethernet MAC found in PowerPC 4xx embedded chips is not suitable for arch/powerpc. It will not build because it relies on the old arch/ppc OCP mechanism. BenH has a new, device-tree aware version of the driver which will work in arch/powerpc, but until it's merged, this patch will disable the old, non-building version. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-01Linux 2.6.22-rc7Linus Torvalds
Last -rc? That's the plan..
2007-07-01PM: introduce set_target method in pm_opsRafael J. Wysocki
Commit 52ade9b3b97fd3bea42842a056fe0786c28d0555 changed the suspend code ordering to execute pm_ops->prepare() after the device model per-device .suspend() calls in order to fix some ACPI-related issues. Unfortunately, it broke the at91 platform which assumed that pm_ops->prepare() would be called before suspending devices. at91 used pm_ops->prepare() to get notified of the target system sleep state, so that it could use this information while suspending devices. However, with the current suspend code ordering pm_ops->prepare() is called too late for this purpose. Thus, at91 needs an additional method in 'struct pm_ops' that will be used for notifying the platform of the target system sleep state. Moreover, in the future such a method will also be needed by ACPI. This patch adds the .set_target() method to 'struct pm_ops' and makes the suspend code call it, if implemented, before executing the device model per-device .suspend() calls. It also modifies the at91 code to use pm_ops->set_target() instead of pm_ops->prepare(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01smsc-ircc2: bypass PNP detection until we get the quirks worked outBjorn Helgaas
Don't use PNP detection by default yet. We have some PNP and BIOS issues to work out first. Sample problem on a Toshiba Portege 4000: the SMCf010 device is handed off disabled. We assign I/O ports originally assigned to the SMCf010 to a PCMCIA device instead. We enable the SMCf010, configuring it to use disjoint ports, but _SRS doesn't work correctly, so the device doesn't work. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01i386: mtrr crash fixAndrew Morton
Commit 3ebad5905609476a4ff1151a66b21d9794009961 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending") added mtrr operations without verifying that the CPU has MTRRs. Crashes transmeta CPUs. Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux@horizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01asus_acpi: fix oops on non-asus machinesMaxime Austruy
If asus_acpi_init doesn't find any device it knows about, it mistakenly returns a "success" error code even though it cleans up after itself. Later when trying to rmmod asus_acpi, the module_exit routine would try to clean up one more time and we would end up calling acpi_bus_unregister_driver(&asus_hotk_driver) twice. This patch addresses this first problem by returning -ENODEV when no appropriate device is found. Then there was also another bug with the code handling the return value of backlight_device_register. If this function ever failed, the driver would cleanup by calling the module_exit routine from module_init, but it would still return "success". So any attempt to rmmod this module would result in asus_acpi_exit being called twice but it's not ready to handle it (I haven't hit this bug, just found it by code inspection). This patch fixes that by inserting a return -ENODEV; at the end of this error handling path. Signed-off-by: Maxime Austruy <maxime@tralhalla.org> Cc: Len Brown <lenb@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01pci.h stubs (for EDD build error)Randy Dunlap
Provide stubs for more PCI bus/slot functions when CONFIG_PCI=n. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01ALSA: more section mismatchesRandy Dunlap
Fix section mismatch warnings: WARNING: sound/built-in.o(.exit.text+0x3ad): Section mismatch: reference to .init.text: (between 'sb_exit' and 'unload_uart6850') WARNING: sound/built-in.o(.exit.text+0x753): Section mismatch: reference to .init.text: (between 'snd_mts64_module_exit' and 'snd_portman_module_exit') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01frv: fix fallout from "remove sched.h from mm.h" patchAlexey Dobriyan
/home/rpjday/AMD/k/topics/0_hi/hi1.c:15: error: dereferencing pointer to incomplete type /home/rpjday/AMD/k/topics/0_hi/hi1.c:16: error: dereferencing pointer to incomplete type Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01SLAB: remove WARN_ON_ONCE for zero sized objects for 2.6.22 releaseChristoph Lameter
We agreed to remove the WARN_ON_ONCE before 2.6.22 is released. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01blink driver power savingStephen Hemminger
The blink driver wakes up every jiffies which wastes power unnecessarily. Using a notifier gives same effect. Also add ability to unload module. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> [ We should really just delete the whole thing. The blink driver is broken in many other ways too -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01i386: remove bogus mtrr range checkLinus Torvalds
Commit 9215da33209b861b01c51382254b178a3fe92a30 "fixed" the MTRR range check to not allow any MTRR's under the 1MB mark (since that's where the fixed MTRR's are active). However, that was totally bogus, since it's normal (and almost required) to have a large variable MTRR that starts at 0, and covers some large percentage of the whole RAM, and then using the fixed MTRR's to override that large MTRR to handle the special ISA hole in the 640k-1M region. The old check was bogus too (checking that no variable MTRR is used that is entirely under the 1MB range), but at least it wasn't actively detrimental, because no sane situation would ever trigger such MTRR usage in the first place. That said, the whole notion of not allowing variable MTRR's in the low 1MB is just stupid, so rather than revert the commit, this just removes the whole sad and unnecessary check entirely. Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Tested-by: Luca Palermo <darkmage@sabayonlinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-29Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add linux/pagemap.h to asm/tlb.h [SPARC64]: Need to set state to IDLE during sun4v IRQ enable. [SPARC64]: Fix VIRQ enabling. [SPARC64]: Add irqs to mdesc_node.
2007-06-29Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IRDA]: fix printk format [NETPOLL] netconsole: fix soft lockup when removing module [NETPOLL]: tx lock deadlock fix SCTP: lock_sock_nested in sctp_sock_migrate SCTP: Fix sctp_getsockopt_get_peer_addrs SCTP: update sctp_getsockopt helpers to allow oversized buffers
2007-06-29Fix VDSO gettimeofday() when called with NULL struct timeval.Will Schmidt
The vdso64 portion of patch 74609f4536f2b8fd6a48381bbbe3cd37da20a527 for fixing problems with NULL gettimeofday input mistakenly checks for a null tz field twice, when it should be checking for null tz once, and null tv once; by way of a r10/r11 typo. Any application calling gettimeofday(&tv,NULL) will "fail". This corrects that typo, and makes my G5 happy. Tested on G5. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Tony Breeds <tony@bakeyournoodle.com> Forwarded-by: Ben Herrenschmidt <benh@kernel.crashing.org> [ Ben says: "I checked the 32 bits part of the change is correct. You can probably blame me for originally writing the 2 versions with inversed usage of r10 and r11, thus confusing Tony :-)" Ben duly blamed. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-29firewire: add Kconfig help on building both stacksStefan Richter
Alas that won't work so good, because nobody reads help texts. I thought about adding some crude multiple choice selection (build the old stack, build the new stack, build both stacks). It's possible, but it would introduce awkward dummy config variables. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-06-29firewire: fix async reception on big endian machinesStefan Richter
descriptor.data_address is little endian Tested-by: Olaf Hering <olh@suse.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-06-28[IRDA]: fix printk formatRandy Dunlap
Fix printk format warning: drivers/net/irda/irport.c:512: warning: format '%d' expects type 'int', but argument 5 has type 'long int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-29gianfar: Fix typo bug introduced by move to udp_hdr()Kumar Gala
In commit 4bedb45203eab92a87b4c863fe2d0cded633427f both the udp and tcp cases where changed to use udp_hdr() instead of leaving the tcp case alone and fixing with tcp_hdr(). This ended up causing random behavior with TCP connections because of looking for tcp_hdr()->check in the wrong place. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-28[NETPOLL] netconsole: fix soft lockup when removing moduleJarek Poplawski
#1 Until kernel ver. 2.6.21 (including) cancel_rearming_delayed_work() required a work function should always (unconditionally) rearm with delay > 0 - otherwise it would endlessly loop. This patch replaces this function with cancel_delayed_work(). Later kernel versions don't require this, so here it's only for uniformity. #2 After deleting a timer in cancel_[rearming_]delayed_work() there could stay a last skb queued in npinfo->txq causing a memory leak after kfree(npinfo). Initial patch & testing by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-29Input: document some of keycodesDmitry Torokhov
Document some of keycodes, based on USB HUT 1.12 and current mapping in HID driver. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-29Input: add a new EV_SW SW_RADIO event, for radio switches on laptopsHenrique de Moraes Holschuh
Many laptops have rf-kill physical switches that are not keys, but slider or rocker switches. Often (like in all ThinkPads with a radio kill slider switch), they have both a slider/rocker switch and a hot key. Trying to kludge a real switch to act like a key is not a very smart thing to do if you can help it, and it gets specially bad when you are going to have both in the same machine. So, we do the right thing and add an input EV_SW event for radio kill switches. The EV_SW SW_RADIO event is defined with positive logic, i.e. when the switch is active, the radios are to be enabled. When the switch is inactive, the radios are to be disabled. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-29Input: serio - take drv_mutex in serio_cleanup()Dmitry Torokhov
We need to take serio->drv_mutex in serio_cleanup() to prevent the function from being called while driver is in the middle of attaching to a serio port. Such situation can happen with i8042 and atkbd drivers if user rapidly presses Ctrl-Alt-Del during system startup, and leads to kernel oops. Reported-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28[SPARC64]: Add linux/pagemap.h to asm/tlb.hAlexey Dobriyan
As seen on sparc64-allnoconfig: CC arch/sparc64/mm/tlb.o In file included from arch/sparc64/mm/tlb.c:19: include/asm/tlb.h: In function 'tlb_flush_mmu': include/asm/tlb.h:60: warning: implicit declaration of function 'release_pages' include/asm/tlb.h: In function 'tlb_remove_page': include/asm/tlb.h:92: warning: implicit declaration of function 'page_cache_release' Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28Merge master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-devDavid S. Miller
2007-06-28Merge branch 'for_linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: phy: Fix phy_id for Vitesse 824x PHY
2007-06-28Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARMDavid Woodhouse
Not all the world is an i386. Many architectures need 64-bit arguments to be aligned in suitable pairs of registers, and the original sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an argument register for padding after the first integer. Since we don't normally have more than 6 arguments for system calls, that left no room for the final argument on some architectures. Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which all fits nicely. In fact, ARM already had that, but called it sys_arm_sync_file_range. Move it to fs/sync.c and rename it, then implement the needed compatibility routine. And stop the missing syscall check from bitching about the absence of sys_sync_file_range() if we've implemented sys_sync_file_range2() instead. Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28serial: clear proper MPSC interrupt cause bitsJay Lubomirski
The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the interrupt for both controllers instead of just the one its supposed to. This can result in the other controller appearing to hang because its interrupt was effectively lost. So, don't clear the interrupt cause bits for both MPSC controllers when clearing the interrupt for one of them. Just clear the one that is supposed to be cleared. Signed-off-by: Jay Lubomirski <jaylubo@motorola.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28ext2: fix return of uninitialised variableAndrew Morton
gcc correctly says fs/ext2/super.c: In function 'ext2_remount': fs/ext2/super.c:1055: warning: 'err' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28mips-jazz: correct flags for timer io resourceAlexey Dobriyan
arch/mips/jazz/setup.c:55:4: error: Initializer entry defined twice Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>