aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-09-22[XFRM]: Kill excessive refcounting of xfrm_state objects.David S. Miller
The refcounting done for timers and hash table insertions are just wasted cycles. We can eliminate all of this refcounting because: 1) The implicit refcount when the xfrm_state object is active will always be held while the object is in the hash tables. We never kfree() the xfrm_state until long after we've made sure that it has been unhashed. 2) Timers are even easier. Once we mark that x->km.state as anything other than XFRM_STATE_VALID (__xfrm_state_delete sets it to XFRM_STATE_DEAD), any timer that fires will do nothing and return without rearming the timer. Therefore we can defer the del_timer calls until when the object is about to be freed up during GC. We have to use del_timer_sync() and defer it to GC because we can't do a del_timer_sync() while holding x->lock which all callers of __xfrm_state_delete hold. This makes SA changes even more light-weight. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Purge dst references to deleted SAs passively.David S. Miller
Just let GC and other normal mechanisms take care of getting rid of DST cache references to deleted xfrm_state objects instead of walking all the policy bundles. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Do not flush all bundles on SA insert.David S. Miller
Instead, simply set all potentially aliasing existing xfrm_state objects to have the current generation counter value. This will make routes get relooked up the next time an existing route mentioning these aliased xfrm_state objects gets used, via xfrm_dst_check(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Simplify xfrm_spi_hashDavid S. Miller
It can use __xfrm{4,6}_addr_hash(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Put more keys into destination hash function.David S. Miller
Besides the daddr, key the hash on family and reqid too. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add generation count to xfrm_state and xfrm_dst.David S. Miller
Each xfrm_state inserted gets a new generation counter value. When a bundle is created, the xfrm_dst objects get the current generation counter of the xfrm_state they will attach to at dst->xfrm. xfrm_bundle_ok() will return false if it sees an xfrm_dst with a generation count different from the generation count of the xfrm_state that dst points to. This provides a facility by which to passively and cheaply invalidate cached IPSEC routes during SA database changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Dynamic xfrm_state hash table sizing.David S. Miller
The grow algorithm is simple, we grow if: 1) we see a hash chain collision at insert, and 2) we haven't hit the hash size limit (currently 1*1024*1024 slots), and 3) the number of xfrm_state objects is > the current hash mask All of this needs some tweaking. Remove __initdata from "hashdist" so we can use it safely at run time. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Convert xfrm_state hash linkage to hlists.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Pull xfrm_state_by{spi,src} hash table knowledge out of afinfo.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Pull xfrm_state_bydst hash table knowledge out of afinfo.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Support Mobile IPv6 extension headers sorting.Masahide NAKAMURA
Support Mobile IPv6 extension headers sorting for two transformation policies. Mobile IPv6 extension headers should be placed after IPsec transport mode, but before transport AH when outbound. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Add sort functions to combine templates/states for IPsec.Masahide NAKAMURA
Add sort functions to combine templates/states for IPsec. Think of outbound transformation order we should be careful with transport AH which must be the last of all transport ones. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] POLICY: Support netlink socket interface for sub policy.Masahide NAKAMURA
Sub policy can be used through netlink socket. PF_KEY uses main only and it is TODO to support sub. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Add sorting interface for state and template.Masahide NAKAMURA
Under two transformation policies it is required to merge them. This is a platform to sort state for outbound and templates for inbound respectively. It will be used when Mobile IPv6 and IPsec are used at the same time. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] POLICY: sub policy support.Masahide NAKAMURA
Sub policy is introduced. Main and sub policy are applied the same flow. (Policy that current kernel uses is named as main.) It is required another transformation policy management to keep IPsec and Mobile IPv6 lives separate. Policy which lives shorter time in kernel should be a sub i.e. normally main is for IPsec and sub is for Mobile IPv6. (Such usage as two IPsec policies on different database can be used, too.) Limitation or TODOs: - Sub policy is not supported for per socket one (it is always inserted as main). - Current kernel makes cached outbound with flowi to skip searching database. However this patch makes it disabled only when "two policies are used and the first matched one is bypass case" because neither flowi nor bundle information knows about transformation template size. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22[XFRM] POLICY: Add Kconfig to support sub policy.Masahide NAKAMURA
Add Kconfig to support sub policy. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Ignore to report if mobility headers is rejected.Masahide NAKAMURA
Ignore to report user-space for known mobility headers rejected by destination options header transformation. Mobile IPv6 specification (RFC3775) says that mobility header is used with destination options header carrying home address option only for binding update message. Other type message cannot be used and node must drop it silently (and must not send binding error) if receving such packet. To achieve it, (1) application should use transformation policy and wild-card states to catch binding update message prior other packets (2) kernel doesn't report the reject to user-space not to send binding error message by application. This patch is for (2). Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Report to user-space when home address option is rejected.Masahide NAKAMURA
Report to user-space when home address option is rejected. In receiving this message user-space application will send Mobile IPv6 binding error. It is rate-limited by kernel. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Introduce XFRM_MSG_REPORT.Masahide NAKAMURA
XFRM_MSG_REPORT is a message as notification of state protocol and selector from kernel to user-space. Mobile IPv6 will use it when inbound reject is occurred at route optimization to make user-space know a binding error requirement. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Trace which secpath state is reject factor.Masahide NAKAMURA
For Mobile IPv6 usage, it is required to trace which secpath state is reject factor in order to notify it to user space (to know the address which cannot be used route optimized communication). Based on MIPL2 kernel patch. This patch was also written by: Henrik Petander <petander@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Transformation support mobility header.Masahide NAKAMURA
Transformation support mobility header. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add sending mobility header functions through raw socket.Masahide NAKAMURA
Mobility header is built by user-space and sent through raw socket. Kernel just extracts its type to flow. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add receiving mobility header functions through raw socket.Masahide NAKAMURA
Like ICMPv6, mobility header is handled through raw socket. In inbound case, check only whether ICMPv6 error should be sent as a reply or not by kernel. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> This patch was also written by: Antti Tuominen <anttit@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add Mobility header definition.Masahide NAKAMURA
Add Mobility header definition for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Antti Tuominen <anttit@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Add Mobile IPv6 route optimization protocols to netlink interface.Masahide NAKAMURA
Add Mobile IPv6 route optimization protocols to netlink interface. Route optimization states carry care-of address. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add destination options header transformation.Noriaki TAKAMIYA
Add destination options header transformation for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add routing header type 2 transformation.Noriaki TAKAMIYA
Add routing header type 2 transformation for Mobile IPv6. Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] IPSEC: Support sending with Mobile IPv6 extension headers.Masahide NAKAMURA
Mobile IPv6 defines home address option as an option of destination options header. It is placed before fragment header then ip6_find_1stfragopt() is fixed to know about it. Home address option also carries final source address of the flow, then outbound AH calculation should take care of it like routing header case. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Revert address to send ICMPv6 error.Masahide NAKAMURA
IPv6 source address is replaced in receiving packet with home address option carried by destination options header. To send ICMPv6 error back, original address which is received one on wire should be used. This function checks such header is included and reverts them. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6]: Put dsthao after flags in order to pack inet6_skb_parm better.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add inbound interface of home address option.Masahide NAKAMURA
Add inbound function of home address option by registering it to TLV table for destination options header. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add home address option definition.Noriaki TAKAMIYA
Add home address option definition for Mobile IPv6. Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6]: Allow to replace skbuff by TLV parser.Masahide NAKAMURA
In receiving Mobile IPv6 home address option which is a TLV carried by destination options header, kernel will try to mangle source adderss of packet. Think of cloned skbuff it is required to replace it by the parser just like routing header case. This is a framework to achieve that to allow TLV parser to replace inbound skbuff pointer. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6]: Find option offset by type.Masahide NAKAMURA
This is a helper to search option offset from extension header which can carry TLV option like destination options header. Mobile IPv6 home address option will use it. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add socket option and ancillary data interface of routing ↵Masahide NAKAMURA
header type 2. Add socket option and ancillary data interface of routing header type 2. Mobile IPv6 application will use this to send binding acknowledgement with the header without relation of confirmed route optimization (binding). Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add inbound interface of routing header type 2.Masahide NAKAMURA
Add inbound interface of routing header type 2 for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[IPV6] MIP6: Add routing header type 2 definition.Noriaki TAKAMIYA
Add routing header type 2 definition for Mobile IPv6. Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22[IPV6]: Add Kconfig to enable Mobile IPv6.Masahide NAKAMURA
Add Kconfig to enable Mobile IPv6. Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22[XFRM]: Fix message about transformation user interface.Masahide NAKAMURA
Transformation user interface is not only for IPsec. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Restrict bundle reusingMasahide NAKAMURA
For outbound transformation, bundle is checked whether it is suitable for current flow to be reused or not. In such IPv6 case as below, transformation may apply incorrect bundle for the flow instead of creating another bundle: - The policy selector has destination prefix length < 128 (Two or more addresses can be matched it) - Its bundle holds dst entry of default route whose prefix length < 128 (Previous traffic was used such route as next hop) - The policy and the bundle were used a transport mode state and this time flow address is not matched the bundled state. This issue is found by Mobile IPv6 usage to protect mobility signaling by IPsec, but it is not a Mobile IPv6 specific. This patch adds strict check to xfrm_bundle_ok() for each state mode and address when prefix length is less than 128. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] IPV6: Update outbound state timestamp for each sending.Masahide NAKAMURA
With this patch transformation state is updated last used time for each sending. Xtime is used for it like other state lifetime expiration. Mobile IPv6 enabled nodes will want to know traffic status of each binding (e.g. judgement to request binding refresh by correspondent node, or to keep home/care-of nonce alive by mobile node). The last used timestamp is an important hint about it. Based on MIPL2 kernel patch. This patch was also written by: Henrik Petander <petander@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Introduce care-of address.Noriaki TAKAMIYA
Care-of address is carried by state as a transformation option like IPsec encryption/authentication algorithm. Based on MIPL2 kernel patch. Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22[XFRM] STATE: Support non-fragment outbound transformation headers.Masahide NAKAMURA
For originated outbound IPv6 packets which will fragment, ip6_append_data() should know length of extension headers before sending them and the length is carried by dst_entry. IPv6 IPsec headers fragment then transformation was designed to place all headers after fragment header. OTOH Mobile IPv6 extension headers do not fragment then it is a good idea to make dst_entry have non-fragment length to tell it to ip6_append_data(). Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Add a hook to obtain local/remote outbound address.Masahide NAKAMURA
Outbound transformation replaces both source and destination address with state's end-point addresses at the same time when IPsec tunnel mode. It is also required to change them for Mobile IPv6 route optimization, but we should care about the following differences: - changing result is not end-point but care-of address - either source or destination is replaced for each state This hook is a common platform to change outbound address. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Rename secpath_has_tunnel to secpath_has_nontransport.Masahide NAKAMURA
On current kernel inbound transformation state is allowed transport and disallowed tunnel mode when mismatch is occurred between tempates and states. As the result of adding two more modes by Mobile IPv6, this function name is misleading. Inbound transformation can allow only transport mode when mismatch is occurred between template and secpath. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Common receive function for route optimization extension headers.Masahide NAKAMURA
XFRM_STATE_WILDRECV flag is introduced; the last resort state is set it and receives packet which is not route optimized but uses such extension headers i.e. Mobile IPv6 signaling (binding update and acknowledgement). A node enabled Mobile IPv6 adds the state. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM]: Restrict authentication algorithm only when inbound transformation ↵Masahide NAKAMURA
protocol is IPsec. For Mobile IPv6 usage, routing header or destination options header is used and it doesn't require this comparison. It is checked only for IPsec template. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Introduce route optimization mode.Masahide NAKAMURA
Route optimization is used with routing header and destination options header for Mobile IPv6. At outbound it makes header space like IPsec transport. At inbound it does nothing because exhdrs.c functions have responsibility to update skbuff information for these headers. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Add a hook to find offset to be inserted header in outbound.Masahide NAKAMURA
On current kernel, ip6_find_1stfragopt() is used by IPv6 IPsec to find offset to be inserted header in outbound for transport mode. (BTW, no usage may be needed for IPv4 case.) Mobile IPv6 requires another logic for routing header and destination options header respectively. This patch is common platform for the offset and adopts it to IPsec. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22[XFRM] STATE: Search by address using source address list.Masahide NAKAMURA
This is a support to search transformation states by its addresses by using source address list for Mobile IPv6 usage. To use it from user-space, it is also added a message type for source address as a xfrm state option. Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>