aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-09-05[TG3]: Use status tag to check for new eventsMichael Chan
Use the status tag to determine if there are new events in tg3_interrupt_tagged(). We discussed about this a while ago with Grant Grundler and DaveM. This scheme makes it unnecessary to clear the updated bit in the status block when using tagged mode, and only a simple comparison is needed to determine if there are new events. The tp->lock around netif_rx_complete() and tg3_restart_ints() is also removed. It is unnecessary with DaveM's new locking scheme. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Remove status block access in tg3_msi() and add prefetchesMichael Chan
Remove unnecessary status block accesses in tg3_msi(). Since MSI is not shared, it is unnecessary to read the status block to determine if there are any new events in the MSI handler. It is also unnecessary to clear the updated bit in the status block. Since the poll list is per-cpu, tg3_poll() will be scheduled to run on the same CPU that received the MSI. Prefetches for the status block and the next rx descriptors are added in tg3_msi() to improve their access times when tg3_poll() runs. In the non-MSI irq handlers, we need to check the status block because interrupts may be shared. Only prefetches for the next rx descriptors are added. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Add PHY loopback testMichael Chan
Improve ethtool loopback self test by adding PHY loopback to the existing MAC loopback test. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Add ethtool -p supportMichael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[TG3]: Minor 5780 and 5752 fixesMichael Chan
Minor SerDes bug fixes for 5780S and nvram bug fixes for 5780 and 5752. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[PATCH] klist: fix klist to have the same klist_add semantics as list_headJames Bottomley
at the moment, the list_head semantics are list_add(node, head) whereas current klist semantics are klist_add(head, node) This is bound to cause confusion, and since klist is the newcomer, it should follow the list_head semantics. I also added missing include guards to klist.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Driver core: small cleanup; remove check for NULL before kfree() in ↵Jesper Juhl
driver core Remove needless checking of variable for NULL before calling kfree() on it. Applies to 2.6.13-rc6-git9 Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Driver core: hande sysdev suspend failureShaohua Li
This patch adds the return value check for sysdev suspend and does restore in failure case. Send the patch to pm-list, but seems lost, so I resend it. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Driver core: Documentation: use S_IRUSR | ... in stead of 0644Jan Veldeman
Change filemode to use defines in stead of 0644, based on suggestions by Walter Harms and Domen Puncer. Signed-off-by: Jan Veldeman <Jan.Veldeman@advalvas.be> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Driver core: Documentation: fix whitespace between parametersJan Veldeman
Fix whitespace after comma between parameters. Signed-off-by: Jan Veldeman <Jan.Veldeman@advalvas.be> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Floppy: add cmos attribute to floppy driver tidyAndrew Morton
Fiddle with coding style a bit. Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Floppy: Add cmos attribute to floppy driverHannes Reinecke
Currently only a device 'fdX' shows up in sysfs; the other possible device for this drive (like fd0h1440 etc) must be guessed from there. This patch corrects the floppy driver to create a platform device for each floppy found; each platform device also has an attribute 'cmos' which represents the cmos type for this drive. From this attribute the other possible device types can be computed. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Driver core: link device and all class devices derived from it.Dmitry Torokhov
Driver core: link device and all class devices derived from it. To ease the task of locating class devices derived from a certain device create symlinks from parent device to its class devices. Change USB host class device name from usbX to usb_hostX to avoid conflict when creating aforementioned links. Tweaked by Greg to have the symlink be "class_name:class_device_name" in order to prevent duplicate links. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Fix manual binding infinite loopGreg Kroah-Hartman
Fix for manual binding of drivers to devices. Problem is if you pass in a valid device id, but the driver refuses to bind. Infinite loop as write() tries to resubmit the data it just sent. Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the problem out. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] orinoco: New driver - spectrum_cs.Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree dee4f325520d4ea29397dd67ca657b7235bb1790 (from c88faac230cc9775445e5c644991c352e35c72a1) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 17:46:39 2005 -0400 New driver - spectrum_cs. Driver for 802.11b cards using RAM-loadable Symbol firmware, such as Symbol Wireless Networker LA4100, CompactFlash cards by Socket Communications and Intel PRO/Wireless 2011B. The driver implements Symbol firmware download. The rest is handled in hermes.c and orinoco.c. Utilities for downloading the Symbol firmware are available at http://sourceforge.net/projects/orinoco/ Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: New driver - orinoco_nortel.Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree dce61aef99ceb57370b70222dc34d788666c0ac3 (from ceb6695092be8dcdfe2dec6ee5097d613011489d) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 15:50:55 2005 -0400 New driver - orinoco_nortel. This is a driver for Nortel emobility PCI adaptors, which consist of an Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge. The driver initializes the device and uses Orinoco core driver for actual wireless networking. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and ↵Pavel Roskin
PCI_HERMES. Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree ceb6695092be8dcdfe2dec6ee5097d613011489d (from 6b39374a27eb4be7e9d82145ae270ba02ea90dc8) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 14:50:10 2005 -0400 Remove EXPERIMENTAL mark from PLX_HERMES, TMD_HERMES and PCI_HERMES. Those drivers have been used for a long time, and there have been very few problem reports. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: Optimize orinoco_join_ap()Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree cb289b9f9b2a0f3ae7070a008f22e383b37526ee (from 56bfcdb38b3d04c1f8c1fd705e411f4be53b663c) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 19:05:16 2005 -0400 Optimize orinoco_join_ap() - break from loop once the requested BSSID is found. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: Fix memory leak on error in processing hostscan frames.Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree ca955293cdfd3139e150d3b4fed3922a7eb651fb (from cb289b9f9b2a0f3ae7070a008f22e383b37526ee) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 19:08:00 2005 -0400 Fix memory leak on error in processing hostscan frames. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: Remove entry for Intel PRO/Wireless 2011B.Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree c88faac230cc9775445e5c644991c352e35c72a1 (from dce61aef99ceb57370b70222dc34d788666c0ac3) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 17:09:45 2005 -0400 Remove entry for Intel PRO/Wireless 2011B. It is not supported by this driver because it has no firmware in flash. spectrum_cs is needed for this device. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] orinoco: Change orinoco_translate_scan() to return error code on error.Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree 8fc038ec51acf5f777fade80c5e38112b766aeee (from ca955293cdfd3139e150d3b4fed3922a7eb651fb) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 19:10:12 2005 -0400 Change orinoco_translate_scan() to return error code on error. Adjust the caller to check for errors and clean up if needed. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] Kconfig fix (PHYLIB vs. s390)viro@ZenIV.linux.org.uk
drivers/net/phy/phy.c is broken on s390; it uses enable_irq() and friends and these do not exist on s390. Marked as broken for now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (15/22) Kconfig fix (82596)Al Viro
driver is non-modular Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] mv643xx: add netpoll api supportDale Farnsworth
Add support for the netpoll api for use by netconsole, kgdb, etc. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] mv643xx: Fix promiscuous mode handlingDale Farnsworth
mv643xx_eth_get_config_reg() was reading the wrong register. mv643xx_eth_set_config_reg() was or'ing instead of setting the register. These functions are trivial and both are called only from mv643xx_eth_set_rx_mode() when changing to/from promiscuous mode. Remove both functions and do the operations directly in mv643xx_eth_set_rx_mode(). Also, maintain promiscuous mode setting across port resets. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] mv643xx: Disable per port bandwidth limitsDale Farnsworth
The mv643xx chips support per port bandwith limits. This patch disables the bandwidth limits by clearing the MTU register. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] mv643xx: fix outstanding tx skb counterDale Farnsworth
This patch corrects the accounting of outstanding tx skbs. It fixes a bug that causes "Error on Queue Full" messages seen since scatter-gather was enabled by using the hardware tcp/udp checksum generator. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] mv643xx: fix skb memory leakDale Farnsworth
This patch fixes an skb memory leak under heavy receive load (whenever the more packets have been received than the NAPI budget allows to be processed). Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: basic sis191 supportFrancois Romieu
The sis191 is the gigabit brother of the sis190. SiS's driver suggests that the register set is backward compatible: this should hopefully give a basic driver. The device should allow the usual features from a modern ethernet adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far the relevant register layout is not documented. SiS's driver does not provide these features either (at least not for Linux). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: RGMII Tx internal delay fiddlingFrancois Romieu
Don't ask. The patch is based on SiS's GPLed driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: make 10Mbps the default when handling the StationControl ↵Francois Romieu
register This patch does three things: - widen the access to the StationControl register (note the SIS_W16 versus SIS_W32 change); - default to 10Mbps half duplex when the LPA can not be evaluated (reg31->ctl is identical for both). It can be argued that it makes sense as the lowest common denominator when everything else failed. Btw it works better than the current code. :o) - remove some enums: they do not document anymore. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: recent chipsets from SiS include a RGMIIFrancois Romieu
Extracted from SiS's GPLed driver. From the few pdf available at SiS's, it seems that the 965 and the 966 south bridge include this interface whereas the 965L (and anything below) does not. It is expected to be a sis191 related feature and should not hurt the existing sis190 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] sis190: unmask the link change eventsFrancois Romieu
link changes reporting does not work when the driver masks its irq event Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] 'mdio_bus_exit' in discarded section .text.exitPeter Chubb
When building with CONFIG_PHYLIB=y on Itanium, I see: `mdio_bus_exit' referenced in section `.init.text' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o I believe that mdio_bus_exit should not be declared __exit, because it is referencesd from __init sections in, say, phy_init(). Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] drivers/net/ne3210.c: cleanupsAdrian Bunk
- make two needlessly global functions static - kill an ancient version variable Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (7/7) __user annotations (ethtool)viro@ftp.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (6/7) missing include (ipw2200)viro@ftp.linux.org.uk
added missing include of dma-mapping.h Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (5/7) iomem annotations, NULL noise removal (ipw2100)viro@ftp.linux.org.uk
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (4/7) missing include (uli526x)viro@ftp.linux.org.uk
added missing include of dma-mapping.h, removed bogus ptrace.h (what the hell was it doing there, in the first place?) Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (3/7) iomem annotations (s2io)viro@ftp.linux.org.uk
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (2/7) iomem annotations (e1000)viro@ftp.linux.org.uk
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[PATCH] (1/7) chelsio sparse annotationsviro@ftp.linux.org.uk
NULL noise removal, __iomem annotations, use of if_mii() instead of open-coding it. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05[ARM] 2882/1: pxa2xx_sharpsl: Update PCMCIA driver to support variety of new ↵Richard Purdie
hardware Patch from Richard Purdie This patch updates the PCMCIA pxa2xx_sharpsl driver to support multiple scoop devices by adding a scoop to pcmcia slot mapping structure. It adds platform support for poodle, is known to work on spitz (which is dual slot) and should also support collie with a minor amount of further work. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-05[ARM] 2876/1: N30 - remove task to toggle USB D+ lineBen Dooks
Patch from Ben Dooks The n30 machine file is using a kernel thread to change the state of the USB D+ pull-up resistor, which is not the proper way to do this. Once the usb-gadget support for the 24xx is merge, the proper access method will be added. This patch also removes the problem of using HZ for the msleep calls, from Nishanth Aravamudan. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-05[PATCH] I2C: Drop the I2C_ACK_TEST ioctlJean Delvare
Drop the I2C_ACK_TEST ioctl, which was commented out. It never really existed (not after 1999 anyway), and there is no such thing as a ack test on I2C/SMBus anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: (3/3) pc87360 driver updateJim Cromie
pc87360: consolidate fan helper This patch consolidates the _set_fan_min() helper routine into the 2 line sysfs-callback wrapper that uses it. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: (2/3) pc87360 driver updateJim Cromie
pc87360: number-skew to init The temp, therm, fan, pwm callbacks all have an offset skew in the code which accommodates attribute numbering conventions under /sys/bus/i2c/devices/9191-6620/ (ie they start at 1) This patch moves that skew into the declaration, and out of the functions (except for therm, where we simplify from 2 skews to 1). The declarative skew is clearer, less error-prone, and more efficient. The use of 11+offset-4 below reflects the fact that the sysfs numbering of these units is 4, 5, 6, but they use internal VLM units 11, 12, 13 to measure the thermistor voltages. There's one remaining skew factor, in *_crit callbacks below, because there are no critical thresholds for voltages 0-10, only for those supporting the thermistors. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] hwmon: (1/3) pc87360 driver updateJim Cromie
Use the new "dynamic sysfs callbacks", as introduced recently by Yani Ioannou, in pc87360. Note that this change isn't indiscriminate. Only those attributes that would benefit from having an index (i.e., those which are macro-repeated) have been converted. This significantly shrinks the size of the module: before: 49235 drivers/hwmon/pc87360.ko after: 32532 drivers/hwmon/pc87360.ko Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] I2C: Fix sgi_xfer return valueJean Delvare
The sgi_xfer function returns 0 on success instead of the number of transfered messages as it is supposed to. This patch fixes that. Let's just hope that no client chip driver was relying on this misbehavior. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] i2c: bug fix for busses/i2c-mv64xxx.cJean Delvare
When an i2c transfer is successful, an incorrect value is returned. This patch fixes that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 00:29:22 +0000