aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-11Merge branch 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'block-2.6.24' of git://git.kernel.dk/data/git/linux-2.6-block: (37 commits) [BLOCK] Fix failing compile with BLK_DEV_IO_TRACE=n compat_ioctl: move floppy handlers to block/compat_ioctl.c compat_ioctl: move cdrom handlers to block/compat_ioctl.c compat_ioctl: move BLKPG handling to block/compat_ioctl.c compat_ioctl: move hdio calls to block/compat_ioctl.c compat_ioctl: handle blk_trace ioctls compat_ioctl: add compat_blkdev_driver_ioctl() compat_ioctl: move common block ioctls to compat_blkdev_ioctl Sysace: Don't enable IRQ until after interrupt handler is registered Sysace: sparse fixes Sysace: Minor coding convention fixup drivers/block/umem: use DRIVER_NAME where appropriate drivers/block/umem: trim trailing whitespace drivers/block/umem: minor cleanups drivers/block/umem: use dev_printk() drivers/block/umem: move private include away from include/linux Sysace: Labels in C code should not be indented. Sysace: Add of_platform_bus binding Sysace: Move IRQ handler registration to occur after FSM is initialized Sysace: minor rework and cleanup changes ...
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] Fix random segfault with preemption [AVR32] Don't use __builtin_xchg() [AVR32] ngw100 i2c-gpio tweaks [AVR32] Ignore a few irrelevant syscalls [AVR32] SMC configuration in clock cycles [AVR32] Drop support for redundant "keepinitrd" boot-time parm. [AVR32] Make dma_sync_*_for_cpu no-ops [AVR32] Remove unneeded 8K alignment of .text section [AVR32] Kill a few hardcoded constants in vmlinux.lds [AVR32] rename vmlinux.lds [AVR32] fix command line parsing in early_parse_fbmem [AVR32] checkstack support [AVR32] Wire up USBA device [AVR32] add multidrive support for pio driver [AVR32] /sys/kernel/debug/at32ap_clk [AVR32] Move AT32_PM_BASE definition into pm.h
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (74 commits) Blackfin serial driver: pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230 blackfin enable arbitary speed serial setting Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT and DEBUG_KERNEL_START Blackfin arch: fix typo in register name Blackfin arch: trim the Blackfin arch MAINTAINERS list Blackfin arch: fix bug libstdc++ calling writev with an iovec containing { NULL, 0 } fails on Blackfin Blackfin arch: Export strcpy - occasionally get module link failures otherwise Blackfin arch: the load address is not safe to point to as a workaround for ANOMALY 05000281 Blackfin arch: show_mem can not be marked as init, since it is called during OOM condition Blackfin arch: flush/inv the correct range when using write back cache and fix bugs find by dmacopy Blackfin arch: update kgdb patch Blackfin arch: Comply with revised Anomaly Workarounds for BF533 05000311 and BF561 05000323 Blackfin arch: Print out debug info, as early as possible Blackfin arch: Enable earlyprintk earlier - so any error after our interrupt tables are set up will print out Blackfin arch: fix endless loop bug when a double fault happens Blackfin arch: Initial patch to add earlyprintk support Blackfin arch: add TWIx_REGBASE and SPIx_REGBASE to specific CPU header files, use the new REGBASE for board platform resources Blackfin arch: modify the insX/outsX and dma_insX/dma_outsX to be compatible with other archs Blackfin arch: add more common defines for output sections Blackfin arch: cleanup IO and DMA_IO API function definitions according to other arches ...
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (310 commits) V4L/DVB (6316): Change list_for_each+list_entry to list_for_each_entry V4L/DVB (6315): pvrusb2: Change list_for_each+list_entry to list_for_each_entry V4L/DVB (6314): saa7134: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6313): ivtv: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6312): cx88: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6311): dvb: Replace list_for_each+list_entry with list_for_each_entry V4L/DVB (6308): V4L: zc0301, remove bad usage of ERESTARTSYS V4L/DVB (6307): V4L: w9968cf, remove bad usage of ERESTARTSYS V4L/DVB (6306): Few clenups for saa7134 resume code V4L/DVB (6305): V4L: videobuf-core.c avoid NULL dereferences in videobuf-core V4L/DVB (6301): pvrusb: Update DEBUGIFC sysfs to kernel 2.6.13+ V4L/DVB (6300): CodingStyle cleanup V4L/DVB (6299): dvb: Add dependencies for VIDEOBUF_DVB V4L/DVB (6297): cx23885: remove wrong Kconfig selection of VIDEOBUF V4L/DVB (6296): dib0700: add support for AverMedia DVB-T Express card V4L/DVB (6295): saa7134: add autodetection for KWorld ATSC-115 V4L/DVB (6293): V4L: convert struct class_device to struct device V4L/DVB (6292): videobuf_core init always require callback implementation V4L/DVB (6291): Fix: avoid oops on some SMP machines V4L/DVB (6290): remove videobuf_set_pci_ops ...
2007-10-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (67 commits) mmc: don't use weight32() pxamci: support arbitrary block size sdio: make the IRQ thread more resilient in the presence of bad states sdio: fix IRQ diagnostic message sdhci: remove old dma module params sdhci: add SDHCI_QUIRK_BROKEN_DMA quirk sdhci: remove DMA capability check from controller's PCI Class reg sdhci: fix a typo mmc: Disabler for Ricoh MMC controller sdio: adaptive interrupt polling mmc: pxamci: add SDIO card interrupt reporting capability mmc: pxamci: set proper buswidth capabilities according to PXA flavor mmc: pxamci: set proper block capabilities according to PXA flavor mmc: pxamci: better pending IRQ determination arm: i.MX/MX1 SDHC implements SD cards read-only switch read-back mmc: add led trigger mmc_spi host driver MMC core learns about SPI MMC/SD card driver learns SPI MMC headers learn about SPI ...
2007-10-11[SKY2]: status polling loop (post merge)Stephen Hemminger
Handle the corner case where budget is exhausted correctly. And save unnecessary read of index register. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[NET]: Fix NAPI completion handling in some drivers.David S. Miller
In order for the list handling in net_rx_action() to be correct, drivers must follow certain rules as stated by this comment in net_rx_action(): /* Drivers must not modify the NAPI state if they * consume the entire weight. In such cases this code * still "owns" the NAPI instance and therefore can * move the instance around on the list at-will. */ A few drivers do not do this because they mix the budget checks with reading hardware state, resulting in crashes like the one reported by takano@axe-inc.co.jp. BNX2 and TG3 are taken care of here, SKY2 fix is from Stephen Hemminger. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: Limit processing lost_retrans loop to work-to-do casesIlpo Järvinen
This addition of lost_retrans_low to tcp_sock might be unnecessary, it's not clear how often lost_retrans worker is executed when there wasn't work to do. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: Fix lost_retrans loop vs fastpath problemsIlpo Järvinen
Detection implemented with lost_retrans must work also when fastpath is taken, yet most of the queue is skipped including (very likely) those retransmitted skb's we're interested in. This problem appeared when the hints got added, which removed a need to always walk over the whole write queue head. Therefore decicion for the lost_retrans worker loop entry must be separated from the sacktag processing more than it was necessary before. It turns out to be problematic to optimize the worker loop very heavily because ack_seqs of skb may have a number of discontinuity points. Maybe similar approach as currently is implemented could be attempted but that's becoming more and more complex because the trend is towards less skb walking in sacktag marker. Trying a simple work until all rexmitted skbs heve been processed approach. Maybe after(highest_sack_end_seq, tp->high_seq) checking is not sufficiently accurate and causes entry too often in no-work-to-do cases. Since that's not known, I've separated solution to that from this patch. Noticed because of report against a related problem from TAKANO Ryousei <takano@axe-inc.co.jp>. He also provided a patch to that part of the problem. This patch includes solution to it (though this patch has to use somewhat different placement). TAKANO's description and patch is available here: http://marc.info/?l=linux-netdev&m=119149311913288&w=2 ...In short, TAKANO's problem is that end_seq the loop is using not necessarily the largest SACK block's end_seq because the current ACK may still have higher SACK blocks which are later by the loop. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: No need to re-count fackets_out/sacked_out at RTOIlpo Järvinen
Both sacked_out and fackets_out are directly known from how parameter. Since fackets_out is accurate, there's no need for recounting (sacked_out was previously unnecessarily counted in the loop anyway). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: Extract tcp_match_queue_to_sack from sacktag codeIlpo Järvinen
This is necessary for upcoming DSACK bugfix. Reduces sacktag length which is not very sad thing at all... :-) Notice that there's a need to handle out-of-mem at caller's place. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: Kill almost unused variable pcount from sacktagIlpo Järvinen
It's on the way for future cutting of that function. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: Fix mark_head_lost to ignore R-bit when trying to mark LIlpo Järvinen
This condition (plain R) can arise at least in recovery that is triggered after tcp_undo_loss. There isn't any reason why they should not be marked as lost, not marking makes in_flight estimator to return too large values. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11[TCP]: Add bytes_acked (ABC) clearing to FRTO tooIlpo Järvinen
I was reading tcp_enter_loss while looking for Cedric's bug and noticed bytes_acked adjustment is missing from FRTO side. Since bytes_acked will only be used in tcp_cong_avoid, I think it's safe to assume RTO would be spurious. During FRTO cwnd will be not controlled by tcp_cong_avoid and if FRTO calls for conventional recovery, cwnd is adjusted and the result of wrong assumption is cleared from bytes_acked. If RTO was in fact spurious, we did normal ABC already and can continue without any additional adjustments. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12Merge branch 'for-2.6.24' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24
2007-10-11[MIPS] tlbex.c: Cleanup __init usage.Franck Bui-Huu
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] WRPPMC serial support move to platform deviceYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] R1: Fix hazard barriers to make kernels work on R2 also.Ralf Baechle
Tested with Malta; inflates malta_defconfig by 3932 bytes. Ideally there should be additional configuration to allow getting rid of this overhead but that would be too much complexity at this stage of the release cycle. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] VPE: reimplement ELF loader.Ralf Baechle
Loading ELF binaries based on the section table is totally wrong. This still leaves the other fat bug of referencing symbols in an executable unfixed, so people better don't run strip on their binaries ... As added bonus the new loader is also 23 lines shorter. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] cleanup WRPPMC include filesYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Add BUG_ON assertion for attempt to run kernel on the wrong CPU type.Franck Bui-Huu
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] SMP: Use ISO C struct initializer for local structs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] SMP: Kill useless casts.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Kill num_online_cpus() loops.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] SMP: Implement smp_call_function_mask().Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Make facility to convert CPU types to strings generally available.Ralf Baechle
So far /proc/cpuinfo has been the only user but human readable processor name are more useful than that for proc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Convert list of CPU types from #define to enum.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Optimize get_unaligned / put_unaligned implementations.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] checkfiles: Fix "need space after that ','" errors.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Fix "no space between function name and open parenthesis" warnings.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Allow hardwiring of the CPU type to a single type for optimization.Ralf Baechle
This saves a few k on systems which only ever ship with a single CPU type. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] tlbex: Size optimize code by declaring a few functions inline.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] pg-r4k.c: Dump the generated codeMaciej W. Rozycki
Dump the generated code for clear/copy page calls like it is done for TLB fault handlers. Useful for debugging. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Remove cobalt_machine_power_off()Yoichi Yuasa
It's same as cobalt_machine_halt(). Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Move reset port definition to arch/mips/cobalt/reset.cYoichi Yuasa
It's only used in arch/mips/cobalt/reset.c. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Move UART base definition to arch/mips/cobalt/console.cYoichi Yuasa
They're only used in arch/mips/cobalt/console.c. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Move PCI definitions to arch/mips/pci/fixup-cobalt.c.Yoichi Yuasa
These PCI definitions are only used in arch/mips/pci/fixup-cobalt.c. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] MTX1: Add defconfig fileFlorian Fainelli
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Add LED support to cobalt_defconfigYoichi Yuasa
Add LED support to cobalt_defconfig. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Add Qube series front LED support to platform registerYoichi Yuasa
Add Cobalt Qube series front LED support to platform register. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Cobalt: Add Cobalt Raq LED platform register and power off triggerYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Optimize __alloc_zeroed_user_highpage implementation.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Avoid indexed cacheops.Ralf Baechle
On MP configurations it's highly dubious what this code will actually affect since blasting away cachelines may or may not do the right thing wrt. cache coherency. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Don't abort the build process if '-msym32' isn't supportedFranck Bui-Huu
-msym32 and previously the strategy to tell the compiler to generate 64-bit code but the assembler to put it into 32-bit ELF was initially a hack to get around the lack of proper 64-bit binutils support and later turned into a neat optimization with significant code size savings. But it's really just an optimization so there is nothing wrong with just dropping the option (and whatever else goes along with it, I forgot all the nasty details) on the floor if due to a vintage compiler it can't be suported. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Clockevent driver for BCM1480Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Clockevent driver for BCM1250Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] i8253 PIT clocksource and clockevent driversRalf Baechle
Derived from the i386 variant with a few x86 complexities chopped off. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] IP27: Add clocksource driversRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Jazz clockevent driverRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Dyntick support for SMTC:Ralf Baechle
The kernel currently only supports broadcasting of the timer interrupt from a single timer, not multicasting into two multicast groups of processors. So the implemented mechanism for SMTC works by broadcasting the cp0 compare interrupt on VPE 0 and ignoring it on any additional VPEs. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>