aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-09ath9k: use right parameter for MODULE_PARM_DESC() for debugLuis R. Rodriguez
Reported-by: sujith.manoharan@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: remove extraneous select FW_LOADERHolger Schurig
As kindly pointed out by Andrey Yurovsky, CONFIG_LIBERTAS already selects FW_LOADER. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: Use lbs_is_cmd_allowed() check in command handling routines.Amitkumar Karwar
lbs_is_cmd_allowed() check is added in __lbs_cmd_async() and lbs_prepare_and_send_command(). The check is removed from other places. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: rename ath_beaconq_setup() to ath9k_hw_beaconq_setup()Luis R. Rodriguez
And move it to hw code on mac.c where it belongs. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ath_cleanup() below helpers to avoid forward declarationsLuis R. Rodriguez
This should fix the oops which occurs during module unload due to the dereferencig of ah upon debugfs exit. IP: [<46412d6b>] 0x46412d6b *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/class/power_supply/BAT0/energy_full Modules linked in: ath9k(-) ath9k_hw mac80211 ath cfg80211 <bleh> Pid: 3112, comm: rmmod Not tainted (2.6.32-rc2-wl #101) 9461DUU EIP: 0060:[<46412d6b>] EFLAGS: 00010246 CPU: 0 EIP is at 0x46412d6b EAX: f5870004 EBX: f6700d94 ECX: 00000000 EDX: c14313a7 ESI: f5870000 EDI: fb58ce70 EBP: f6661eb4 ESP: f6661ea8 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process rmmod (pid: 3112, ti=f6660000 task=f6579380 task.ti=f6660000) Stack: fb57e5e5 f5ca5d50 fb58ce70 f6661ebc fb58629a f6661ec8 c11b715e f5ca5da8 <0> f6661ed8 c1223d98 f5ca5da8 f5ca5ddc f6661eec c1223e6f fb58ce70 fb58ce70 <0> c14958a0 f6661f00 c1222edb fb58ce70 fb58ce70 fb58cebc f6661f1c c12243c9 Call Trace: [<fb57e5e5>] ? ath_cleanup+0x35/0x50 [ath9k] [<fb58629a>] ? ath_pci_remove+0x1a/0x20 [ath9k] [<c11b715e>] ? pci_device_remove+0x1e/0x40 [<c1223d98>] ? __device_release_driver+0x58/0xa0 [<c1223e6f>] ? driver_detach+0x8f/0xa0 [<c1222edb>] ? bus_remove_driver+0x7b/0xb0 [<c12243c9>] ? driver_unregister+0x49/0x80 [<c1158cf2>] ? sysfs_remove_file+0x12/0x20 [<c11b73b5>] ? pci_unregister_driver+0x35/0x90 [<fb586172>] ? ath_pci_exit+0x12/0x20 [ath9k] [<fb5883ec>] ? ath9k_exit+0x10/0x3d [ath9k] [<c131971d>] ? mutex_unlock+0xd/0x10 [<c1088c0f>] ? sys_delete_module+0x16f/0x220 [<c10e3d5d>] ? do_munmap+0x23d/0x290 [<c11a629c>] ? trace_hardirqs_off_thunk+0xc/0x10 [<c11a628c>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c1003b41>] ? sysenter_exit+0xf/0x1a [<c1003b08>] ? sysenter_do_call+0x12/0x3c Code: Bad EIP value. EIP: [<46412d6b>] 0x46412d6b SS:ESP 0068:f6661ea8 CR2: 0000000046412d6b ---[ end trace 847f3b05ff3dcb19 ]--- Reported-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: add a helper to clean the core driver upon module unloadLuis R. Rodriguez
The core driver needs to be stopped and then as a last step the hardware needs to be stopped and its structure free'd. We do this by moving the core driver cleanup to a new helper ath_clean_core() and have ath_cleanup() call it. Only as a last step does ath_cleanup() now free the hw. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: add helper to un-init the hw properlyLuis R. Rodriguez
This is used in several places, ensure we do it right in all callers by using a helper. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: initialize hw prior to debugfsLuis R. Rodriguez
debugfs uses the hardware for several debugfs files as such the hardware must be initialized and available prior to its usage. The same applies to when we free the hw structs -- free debufs file entries prior to free'ing the hardware. Reported-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move common->debug_mask setting to ath_init_softc()Luis R. Rodriguez
What this means is we can enable now debug prints without requiring CONFIG_ATH9K_DEBUG. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: enable Power-Save Polls by setting the association IDLuis R. Rodriguez
mac80211 has long provided us the association ID. This isn't useful except for Power-Save polling which now gets enabled. We can now poll for our pending frames on the AP during power save. You can review the details of Power-Save on the wireless wiki: http://wireless.kernel.org/en/developers/Documentation/ieee80211/power-savings Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: fix regression which triggers an SME join upon assocLuis R. Rodriguez
This fixes a regression introduced by patch titled: "atheros: define shared bssidmask setting" The register for the BSSID was exchanged for the bssid mask register. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: remove temporary low_id and high_id vars on ath5k_hw_set_associd()Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: simplify passed params to ath5k_hw_set_associd()Luis R. Rodriguez
We have access to common->curbssid and common->curaid so just use those. Note that common->curaid is always 0 so this keeps our current behaviour of always using 0 for now. Once we fix storing the association ID passed by mac80211 this will require no changes here. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: fix regression introduced upon the removal of AR5K_HIGH_ID()Luis R. Rodriguez
The trick was to add four bytes whenever this was used. There are two places where this was missed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: use ath_hw_setbssidmask() for bssid mask setting upon assocLuis R. Rodriguez
This should avoid future typos. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: fix regression on setting bssid mask on associationLuis R. Rodriguez
There was a typo on the second bssid mask register. This was caused by the patch titled: "ath5k: use common curbssid, bssidmask and macaddr" Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wireless: fix CFG80211_WEXT build problemsRandy Dunlap
Fix CFG80211_WEXT build dependencies/errors: ERROR: "cfg80211_wext_siwscan" [drivers/net/wireless/orinoco/orinoco.ko] undefined! ERROR: "cfg80211_wext_siwmode" [drivers/net/wireless/orinoco/orinoco.ko] undefined! ERROR: "cfg80211_wext_giwrange" [drivers/net/wireless/orinoco/orinoco.ko] undefined! ERROR: "cfg80211_wext_giwmode" [drivers/net/wireless/orinoco/orinoco.ko] undefined! ERROR: "cfg80211_wext_giwname" [drivers/net/wireless/orinoco/orinoco.ko] undefined! ERROR: "cfg80211_wext_giwscan" [drivers/net/wireless/orinoco/orinoco.ko] undefined! ERROR: "cfg80211_wext_giwname" [drivers/net/wireless/ipw2x00/ipw2200.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07net/wireless/ethtool.h: drop unnecessary include of linux/ethtool.hJohn W. Linville
Everything including this header includes net/cfg80211.h, which includes linux/netdevice.h, which includes linux/ethtool.h already. Why slow-down the build, even a little bit? Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07orinoco: support ETHTOOL_GPERMADDRJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ipw2200: support ETHTOOL_GPERMADDRJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwmc3200wifi: support ETHTOOL_GPERMADDRJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07mac80211: support ETHTOOL_GPERMADDRJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: first stab at cfg80211 supportHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: separate libertas' Kconfig in it's own fileHolger Schurig
Also sorts all "source" lines in the wireless/Kconfig. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07Wireless / ath5k: Simplify suspend and resume callbacksRafael J. Wysocki
Simplify the suspend and resume callbacks of ath5k by converting the driver to struct dev_pm_ops and allowing the PCI PM core to do the PCI-specific suspend/resume handling. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07at76c50x-usb: set firmware and hardware version in wiphyKalle Valo
Set firmware and hardware version in wiphy so that user space can access it. (Modification from original in favor of cfg80211 ethtool support. -- JWL) Cc: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07cfg80211: add firmware and hardware version to wiphyKalle Valo
It's useful to provide firmware and hardware version to user space and have a generic interface to retrieve them. Users can provide the version information in bug reports etc. Add fields for firmware and hardware version to struct wiphy. (Dropped nl80211 bits for now and modified remaining bits in favor of ethtool. -- JWL) Cc: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wireless: implement basic ethtool support for cfg80211 devicesJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: validate the signature for EEPROM and OTPWey-Yi Guy
Both 1000 & 6000 series NICs contain on-chip OTP memory that replaces the off-chip EEPROM memory. The nature of OTP means there is a limited number of times a particular board can go through the factory flow and be (re)calibrated. As a consequence there will be some boards that contain EEPROM memory because OTP blocks were full. In the signature validation routine, iwlwifi needs to make sure "select bit" and "EEPROM/OTP signature" agree on the type of NVM to be used to configure the system. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: replace iwl_poll_direct_bit with iwl_poll_bit for CSR accessAbhijeet Kolekar
Replace iwl_poll_direct_bit with iwl_poll_bit when accessing CSR registers. There is no need to power up the mac to access CSR registers. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Ben M Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi/iwl3945 : unify apm stop operationAbhijeet Kolekar
Unify the usage of apm_stop_master and apm_stop across all hardwares. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: LED cleanupJohannes Berg
The iwlwifi drivers have LED blinking requirements that mac80211 cannot fulfill due to the use of just a single LED instead of different ones for TX, RX, radio etc. Instead, the single LED blinks according to transfers and is solid on the rest of the time. As such, having LED class devices registered that mac80211 triggers are connected to is pointless as we don't use the triggers anyway. Remove all the useless code and add hooks into the driver itself. At the same time, make the LED code abstracted so the core code that determines blink rate etc. can be shared between 3945 and agn in iwlcore. At the same time, the fact that we removed the use of the mac80211 LED triggers means we can also remove the IWLWIFI_LEDS Kconfig symbol since the LED support is now self-contained. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: device tracingJohannes Berg
In order to have an easier way to debug issues, create trace events (using the ftrace framework) that will allow us to follow exactly what the driver is doing with the device. The text format isn't all that useful, but the binary format can also be obtained easily via debugfs and then analysed on the fly or offline with debugging tools. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: set default aggregation frame count limit to 31Wey-Yi Guy
Multiple MPDUs can be aggregated, transmitted, and finally acknowledged together using a single BA frame. Block ACK (BA) contains bitmap size of 64*16 bits so the maximum frame count is 64. The default value of aggregation frame count suggested by uCode is 31 to achieve best performance. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: clear the translate table areaHuaxu Wan
Driver should clear the translate table area after receiving "Alive" response from uCode. This patch corrects a mistake when doing this. Signed-off-by: Huaxu Wan <huaxu.wan@linux.intel.com> Signed-off-by: Guo Chaohong <chaohong.guo@linux.intel.com> Acked-by: Ben M Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: change valid EEPROM version for 1000 seriesWey-Yi Guy
In order to support different type of 1000 series NICs we release to customers before the production release, iwlwifi driver need to support all the NICs has EEPROM version greater than 0x15c. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: reliable entering of critical temperature stateWey-Yi Guy
When uCode detects critical temperature it should send "card state notification" interrupt to driver and then shut itself down to prevent overheating. There is a race condition where uCode shuts down before it can deliver the interrupt to driver. Additional method provided here for driver to enter CT_KILL state based on temperature reading. How it works: Method 1: If driver receive "card state notification" interrupt from uCode; it enters "CT_KILL" state immediately Method 2: If the last temperature report by Card reach Critical temperature, driver will send "statistic notification" request to uCode to verify the temperature reading, if driver can not get reply from uCode within 300ms, driver will enter CT_KILL state automatically. Method 3: If the last temperature report by Card did not reach Critical temperature, but uCode already shut down due to critical temperature. All the host commands send to uCode will not get process by uCode; when command queue reach the limit, driver will check the last reported temperature reading, if it is within pre-defined margin, enter "CT_KILL" state immediately. In this case, when uCode ready to exit from "CT_KILL" state, driver need to restart the adapter in order to reset all the queues and resume normal operation. One additional issue being address here, when system is in CT_KILL state, both tx and rx already stopped, but driver still can send host command to uCode, it will flood the command queue since card was not responding; adding STATUS_CT_KILL flag to reject enqueue host commands to uCode if it is in CT_KILL state, when uCode is ready to come out of CT_KILL, driver will clear the STATUS_CT_KILL bit and allow enqueue the host commands to uCode to recover from CT_KILL state. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wl1251: remove wl1251_netlink.hKalle Valo
The file was accidentally added in commit ef2f8d4577 ("wl1251: add wl1251 prefix to all 1251 files"). This happened when I rebased the patches from a private tree. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07libertas: Add auto deep sleep support for SD8385/SD8686/SD8688Amitkumar Karwar
Add timer based auto deep sleep feature in libertas driver which can be configured using iwconfig command. This is tested on SD8688, SD8686 cards with firmware versions 10.38.1.p25, 9.70.4.p0 respectively on 32-bit and 64-bit platforms. Tests have been done for USB/CS cards to make sure that the patch won't break USB/CS code. We didn't test the if_spi driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07staging: Add proper selection of WIRELESS_EXT and WEXT_PRIVLarry Finger
After the incorporation of the patch entitled "wext: refactor", some of the wireless drivers in drivers/staging fail to build because they need to have CONFIG_WIRELESS_EXT and CONFIG_WEXT_PRIV defined. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07wext: refactorJohannes Berg
Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: define a common priv structLuis R. Rodriguez
hw code should never use private driver data, but sometimes we need a backpointer so just stuff it on the common ath struct. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07nl80211: report age of scan resultsHolger Schurig
Linux keeps scan results up to 15 seconds. This can be a problem for fast moving clients: they get back stale data. But if the kernel reports the age of the BSS items, then user-space can simply weed out old entries by itself. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k_hw: add AR9271 srev and device ID to allow hw to support ar9271Luis R. Rodriguez
This allows for hw support to be enabled for ar9271. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k_hw: print device ID if not supportedLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move hw code to its own moduleLuis R. Rodriguez
hw code for Atheros 802.11n hardware is commmon between different chipsets. This moves this code into a separate module, the next expected user of this code will be the ath9k_htc module. The ath9k/ dir is now selected by ATH9K_HW, an option which gets selected by either ath9k or ath9k_htc, but remains invisible for user menuconfig configuration. If either ath9k or ath9k_htc will be compiled into the kernel ath9k_hw will also be compiled in. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: use common read/write ops on pci and debug codeLuis R. Rodriguez
PCI and debug code will not be shared between ath9k and ath9k_htc, so make that code use the common read/write ops. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07b43: Comment unused functions lpphy_restore_dig_flt_state and ↵Jaswinder Singh Rajput
lpphy_disable_rx_gain_override Commenting unused functions lpphy_restore_dig_flt_state and lpphy_disable_rx_gain_override, may be we need these functions in future. This also fixed following compilation warnings : CC [M] drivers/net/wireless/b43/phy_lp.o drivers/net/wireless/b43/phy_lp.c:383: warning: ‘lpphy_restore_dig_flt_state’ defined but not used drivers/net/wireless/b43/phy_lp.c:891: warning: ‘lpphy_disable_rx_gain_override’ defined but not used Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: drop lib80211 dependencyChristian Lamparter
Ever since Johannes' "iwlwifi: improve scan support" iwlwifi no longer needs any of lib80211's functions or definitions. This patch updates iwlwifi's Kconfig _selections_ and removes all left lib80211.h inclusions from the source files. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: Fix bugs in handling TX powerSenthil Balasubramanian
* Get power table offset from the EEPROM instead of using a hardcoded value of -5 if the EEPROM rev is >= 21. * Add support in the 4k eeprom code for tx power offset in case we have a 4k AR9280 implementation. * Fix tx power accuracy at high powers. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 07:31:21 +0000