aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-12mwl8k: add 5 GHz band channels and ratesLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: move responsibility for initialising wiphy bands to GET_HW_SPECLennert Buytenhek
So that we can make 2.4 GHz and 5 GHz band registration conditional on the capability bitmask returned by the firmware. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: rename 2.4 GHz band/channels/rates related variables from FOO to FOO_24Lennert Buytenhek
To prepare for adding 5 GHz band/channels/rates. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: add another 88w8366 PCI IDLennert Buytenhek
0x2a43 is a single-band (2.4GHz only) 88w8366 mini-PCIe card. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: simplify sequence number assignmentLennert Buytenhek
By storing the sequence counter in << 4 format, like other drivers do. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: don't call SET_AID if we're not associatedLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: remove (mostly) write-only variable priv->current_channelLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: update MODULE_FIRMWARE tagsLennert Buytenhek
Add MODULE_FIRMWARE tags for the mwl8k firmware images that don't have them yet, and move them to where the firmware image names are declared. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: add U-APSD supportKalle Valo
wl1251 firmware supports U-APSD just with a simple queue configuration change so enable it. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12wl1251: create qos null data templateKalle Valo
The qos null data template is needed for U-APSD. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ieee80211: add struct ieee80211_hdr_qosKalle Valo
The header can be used to create qos nullfunc frames, for example. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: check uapsd state for dynamic power saveKalle Valo
To make U-APSD client mode effective, we must not wake up from dynamic power save when transmitting frames. So if dynamic power save is enabled, it needs check the queue the transmitted packet is in and decide if we need to wake up or not. In a perfect world, where all packets would have correct QoS tags, U-APSD enabled queues should not trigger wakeup from power save. But in the real world, where very few packets have correct QoS tags, this won't work. For example, if only voip class has U-APSD enabled and we send a packet in voip class, but the packets we receive are in best effort class, we would receive the packets with the legacy power save method. And that would increase latencies too much from a voip application point of view. The workaround is to enable U-APSD for all qeueus and still use dynamic ps wakeup for all other queues except voip. That way we can still save power with a voip application and not sacrifice latency. Normal traffic (in background, best effort or video class) would still trigger wakeup from dynamic power save. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: create tx handler for dynamic psKalle Valo
Currently dynamic ps check is in ieee80211_xmit(), but it's cleaner to have a separate tx handler for this. Also this is a prerequisite for U-APSD client mode which needs to know the queue frame is in. Also need_dynamic_ps() function is embedded to the tx handler. No functional changes expect that the code is run in a later phase than originally. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: add debugfs interface for U-APSD queue configurationKalle Valo
Because it's not yet decided how to configure which queues are U-APSD enabled, add a debugfs interface for testing purposes. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: add U-APSD client supportKalle Valo
Add Unscheduled Automatic Power-Save Delivery (U-APSD) client support. The idea is that the data frames from the client trigger AP to send the buffered frames with ACs which have U-APSD enabled. This decreases latency and makes it possible to save even more power. Driver needs to use IEEE80211_HW_UAPSD to enable the feature. The current implementation assumes that firmware takes care of the wakeup and hardware needing IEEE80211_HW_PS_NULLFUNC_STACK is not yet supported. Tested with wl1251 on a Nokia N900 and Cisco Aironet 1231G AP and running various test traffic with ping. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: remove unused type argumentJohannes Berg
The type argument to DEBUGFS_ADD() isn't used and can be removed, it's around from before the conversion to debugfs_remove_recursive(). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: flush workqueue before calling driver ->stop() methodLennert Buytenhek
Since commit "mwl8k: handle station database update for AP's sta entry via ->sta_notify()", mwl8k every now and then gets a command timeout when ifconfig'ing a STA interface down. This turns out to be due to mwl8k_stop() being called while the work queue item that was scheduled by mwl8k_sta_notify() to remove the STA entry for the associated AP is still queued, and the former disables interrupts so that when the latter eventually runs, a command completion interrupt is never seen. Fix this by changing ieee80211_stop_device() so that the workqueue is flushed before drv_stop() is called, instead of doing it the other way around as is done now. (As ->stop() is allowed to sleep, there isn't any reason for drivers to queue work from within it.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12net/mac80211/mlme.c: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12iwl-debugfs.c: remove unnecessary casts of void *H Hartley Sweeten
void pointers do not need to be cast to other pointer types. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12iwlwifi: fix bug in tx byte count tableWey-Yi Guy
When setting invalid byte count in txq byte count table, read pointer should be used instead of write pointer. Reported-by: Guo, Chaohong <chaohong.guo@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12iwlwifi: remove obsoleted host commandWey-Yi Guy
"RADAR_NOTIFICATION" host command is not used and not supported by uCode, remove it from driver code. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12iwlwifi: ucode statistics data structure updateWey-Yi Guy
Update data structure to match latest statistics report from uCode. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12iwlwifi: add IEEE80211_AMPDU_TX_OPERATIONALWey-Yi Guy
mac80211 do not check the return code now, what if mac80211 does start using the return code? IEEE80211_AMPDU_TX_OPERATIONAL is a valid action, just iwlwifi driver do not need to take any action for it; so instead of return "-EINVAL", it is a good program practice to return "-EOPNOTSUPP" to make sure mac80211 will not get wrong impression. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: fix return from ieee80211_assoc_successJohannes Berg
sparse pointed out that I made a mistake converting the return value of ieee80211_assoc_success to bool, this place should return false instead of one of the enum values (which would be true). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: move receive processing to taskletLennert Buytenhek
Like how TX reclaim is done in a tasklet, move receive processing to tasklet context as well. This can have nice benefits for CPU utilisation and throughput, especially at 3-stream rates. (Use the same CLEAR_SEL trick as the TX reclaim tasklet does, to avoid having to touch the interrupt mask registers.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: keep TX_DONE interrupt masked while transmit reclaim is runningLennert Buytenhek
By making use of the CLEAR_SEL feature of the mwl8k host interface interrupt controller, we can keep the TX_DONE interrupt source masked while the transmit reclaim tasklet is running (NAPI style) without having to touch the interrupt controller's interrupt mask register when entering or exiting polling mode, and without having to do any more register reads/writes than we do now. When CLEAR_SEL is enabled on the TX_DONE interrupt source, reading the interrupt status register will clear the TX_DONE status bit if it was set, allowing it to be set again if a new TX_DONE event arrives while we are running the TX reclaim tasklet, but such a new event will then not trigger another PCI interrupt until a zero is written to the TX_DONE interrupt status register bit. I.e., if we write a zero to the TX_DONE interrupt source bit in the interrupt status register when the TX reclaim tasklet thinks it's done, a PCI interrupt will be triggered if a new TX_DONE event arrived from the hardware between us deciding that there is no more work to do and re-enabling the TX_DONE interrupt source, thereby avoiding the classic NAPI poll mode exit race that would otherwise occur. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: allow limiting the amount of transmit reclaim doneLennert Buytenhek
Add a limit argument to mwl8k_txq_reclaim(), to allow limiting the number of packets that it will reclaim, and make it return the number of packets that it reclaimed. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: basic AP interface supportLennert Buytenhek
Add support for creating AP interfaces, and enabling beaconing. This allows running a basic AP (11b/g mode only for now). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: correctly set the mac_type field for AP SET_MAC_ADDRLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: implement AP firmware station database maintenanceLennert Buytenhek
STA firmware uses UPDATE_STADB to manipulate the hardware station database, whereas AP firmware uses SET_NEW_STN -- this implements the latter, and hooks it into mwl8k_sta_notify(), to be used if we're running on AP firmware. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: add the AP version of USE_FIXED_RATELennert Buytenhek
As with the STA version, unicast will use auto rate adaptation, but the AP version allows setting the rates to be used for management and multicast transmissions, which can be set based on the BSS basic rate set. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: simplify mwl8k_cmd_use_fixed_rate()Lennert Buytenhek
As we always use the auto rate adaptation feature and never pass in a rate table, USE_FIXED_RATE can be simplified somewhat. While we're at it, rename it to *_sta, as this is the STA version of the command. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: bump the transmit wait timeout to 5 secondsLennert Buytenhek
While it is reasonable to expect that at least one transmit ring entry will be processed per second while we are waiting for the transmit rings to drain, the firmware can end up doing batching of transmit ring status writeback, which means that the transmit rings can appear stuck for more than a second at a time. Bump the TX drain wait timeout up from 1 to 5 seconds to account for this. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: undo transmit queue 0/1 swapping in mwl8k_cmd_set_edca_params()Lennert Buytenhek
The comment and code in mwl8k_cmd_set_edca_params() suggest that the mapping between SET_EDCA_PARAMS queue numbers and transmit rings isn't actually 1:1, while tests show that the mapping is in fact 1:1. So, get rid of the transmit queue 0/1 swapping. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: minor cleanupsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: do not transmit frames on unconfigured 4-addr vlan interfacesFelix Fietkau
If frames are transmitted on 4-addr ap vlan interfaces with no station, they end up being transmitted unencrypted, even if the ap interface uses WPA. This patch add some sanity checking to make sure that this does not happen. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: allow station updates on ap interfaces for vlan stationsFelix Fietkau
Since the per-vif station changes, sta_info_get on the ap sdata no longer returns entries for stations on ap vlans. This causes issues with hostapd, which currently always passes the ap interface name to nl80211 calls. This patch provides bug compatibility with the earlier versions until hostapd is fixed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: use nullfunc frames for 4-addr sta detectionFelix Fietkau
To detect incoming 4-addr stations, hostapd needs to receive a 4-addr data frame from the remote station, so that it can create the AP VLAN for it. With this patch, the mlme code emits a 4-addr nullfunc frame immediately after assoc. On the AP side it also drops 4-addr nullfunc frames to the cooked monitor mode interface, if the interface hasn't been fully set up to receive 4-addr data frames yet. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Fix monitor mode handlingSujith
mac80211 passes appropriate flags indicating whether monitor mode is being used. Use this to set the HW opmode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add debugfs file for RX errorsSujith
This file can be used to track frame reception errors. PHY error counts are also added. Location: ath9k/phy#/recv Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Fix queue handlingSujith
The TX queues have to be stopped during an internal reset. Not handling this would result in packet loss - fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Cleanup init/deinit routinesSujith
The device initialization and termination functions were messy and convoluted. Introduce helper functions to clarify init_softc() and simplify things in general. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Cleanup Powersave flagsSujith
sc_flags has slowly become a kitchen sink over time. Move powersave related flags to a separate variable. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add new file init.cSujith
Move initialization/de-initialization related code to this file. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add a new file for GPIOSujith
Move all LED/RFKILL/BTCOEX related code to gpio.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12cfg80211: Fix country IE parsing for single channel tripletsLuis R. Rodriguez
This enhances the way we parse country IEs to minimize the number of regulatory rules that we create. It also fixes our current implementation which treated country IE triplets with only one channel as one independed regulatory rule even though adjecent rules were also being provided. Without this patch APs which send country IE information with a channel triplet for each individual channel will force cfg80211 to deny HT40 operation as a regulatory rule would have been created independently for each channel and as such configured only for 20 MHz operation. Although 802.11n APs which send country IEs triplets in this fassion are likely rare Benoit reports this against the Ubiquity NanoStation M5, with Country "FR" and HT40 enabled. Since we now have a helper which parses the triplets in intermediate steps we now take care extra care to process padding. Reported-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12cfg80211: process the max power on a country IELuis R. Rodriguez
The max power from each country IE triplet was being ignored. This fix isn't critical as CRDA was always being used for the lower limit, but we should process it in case the AP still wants to decrease power output even more for whatever reason. Reported-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12cfg80211: add debug print when we drop a bogus country IELuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12b43: LP-PHY: note and explain specs inconsistencyRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: fix a few work bugsJohannes Berg
Kalle and Lennert reported problems with the new work code, and at least Kalle's problem I was able to trace to a missing jiffies initialisation. I also ran into a problem where occasionally I couldn't connect, which seems fixed with kicking the work items after scanning. Finally, also add some sanity checking code to verify that we're not adding work items while an interface is down -- that case could lead to something similar to what Lennert was seeing. There still seems to be a race condition that we're trying to figure out separately. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>