aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-16[ALSA] ad1848: Fix msleep while atomicTrent Piepho
Simplest fix. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ac97: YMF743 missing controls support (2/2)Keita Maehara
These patches enable a few YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The second one contains following changes: - A chip-specific SPDIF support for YMF743 (It doesn't have AC97 standard SPDIF registers seen on YMF753). - The implementation for 'IEC958 Playback Source' and 'IEC958 Mute' are identical to the ones for YMF753. But there is no 'IEC958 Output Pin' for YMF743. Signed-off-by: Keita Maehara <maehara@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ac97: YMF743 missing controls support (1/2)Keita Maehara
These patches enable some YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The first one contains only cosmetic changes to share a few YMF753-specific symbols with YMF743. Signed-off-by: Keita Maehara <maehara@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] schedule_timeout() fix for core/seq/seq_instr.cRene Herman
Replace schedule_timeout() with schedule_timeout_uninterruptible() to avoid signals in loop. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] alsa-kernel: schedule_timeout() fixesRene Herman
Fix schedule_timeout() use in alsa-kernel. Mostly just schedule_timeout(1) --> schedule_timeout_uninterruptible(1) The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main, delete a superfluous set_current_state() and in soc/soc-dapm.c replace an _interruptible with _uninterruptible in some debug code; it's not waiting for signals. Signed-off-by: Rene Herman <rene.herman> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda: More subsystem id BIOS changesMatthew Ranostay
More laptop BIOS changes the subsystem id for STAC9205 cards if the microphone is toggled on/off in the settings. The patch removes the old STAC_9205_M43xx and use STAC_9205_DELL_M43. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Add description about power-saving modeTakashi Iwai
Added the description about power-saving mode on AC97 and HD-audio drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Add default values for power-saving as Kconfig optionsTakashi Iwai
Added CONFIG_SND_AC97_POWER_SAVE_DEFAULT and CONFIG_SND_HDA_POWER_SAVE_DEFAULT Kconfig options as the default values for power-saving mode of AC97 and HD-audio drivers, respectively. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sscape: support for audio part of VIVO cardsKrzysztof Helt
This patch adds support for audio part of the Ensoniq SoundScape VIVO cards. The MIDI part is not supported. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] opti9xx: adjust OPL3 FM resource valueTakashi Iwai
The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through pnp and put their on-chip OPL3 at +8. The driver assumes the provided value is the ALBase (OPL3 address) though and checks for an OPL4 at -8, which means that simply adding 8 to the pnp provides value works to fix detection of both OPL3 and OPL4. Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and 925 (together all OPTi ISA-PnP chips) by me. Signed-off-by; Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Add descriptions for new module options of snd-sscape driverTakashi Iwai
Add descriptions for new module options of snd-sscape driver, wss_port and dma2. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sscape: driver extension to 2nd DMA and WSS portKrzysztof Helt
This patch adds second DMA channel and WSS port settings to the sscape driver. Also, it adds internal card type setting. The Ensoniq SoundScape VIVO PnP id is added but not handled yet. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] caiaq - support for Native Instrument's RigKontrol3Daniel Mack
This patch adds support for Native Instrument's upcoming RigKontrol3 sound interface. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sc6000: 2 minor fixesKrzysztof Helt
This patch zeroes buffer for the card name and fixes incorrect jump in the probe function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sc6000: documentation fixKrzysztof Helt
This patch fixes MPU-401 irq values list in documentation. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Routines for effect processor FX8010: Use list_for_each_entryMatthias Kaehlcke
Routines for effect processor FX8010: Use list_for_each_entry instead of list_for_each Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Intel HD Audio: Use list_for_each_entry(_safe)Matthias Kaehlcke
Intel HD Audio: Use list_for_each_entry(_safe) instead of list_for_each(_safe) Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ESS Maestro 1/2/2E Sound Card: Use list_for_each_entryMatthias Kaehlcke
ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry instead of list_for_each Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ad1848_lib: waiting loops done after cs4231_libKrzysztof Helt
This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sc6000 build fixAndrew Morton
sound/isa/sc6000.c: In function 'sc6000_dsp_reset': sound/isa/sc6000.c:270: error: implicit declaration of function 'udelay' sound/isa/sc6000.c: In function 'sc6000_init_mss': sound/isa/sc6000.c:327: error: implicit declaration of function 'msleep' {standard input}: Assembler messages: Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] echoaudio - Add barrier() to prevent compiler optimizationGiuliano Pochini
This patch adds a barrier() to prevent the compiler from moving the read outside of the loop. It also fixes a comment. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec: Add two new systems to ALC883Tobin Davis
This patch adds support for the Asus M2A-VM HDMI and Abit IP35-PRO motherboards. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec: Add 4 channel support for Realtek ALC883Tobin Davis
I had a request for a 4 channel mode. This should implement front and surround outputs, leaving the 3rd plug for mic input. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: fix distortion on rear channelsClemens Ladisch
When playing multichannel data, the rear channels can get distorted if the last sample of the last played stereo stream was not zero. To avoid this, add a hack to play a few silence samples after the stream is stopped. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: clean up struct cmipci_pcmClemens Ladisch
Remove some unused field from the struct cmipci_pcm, and change the type of some others to save some space. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: fix lookup of double ratesClemens Ladisch
When using one of the double sampling rates, use half the sample rate to look up in the rates[] table, otherwise we stumble over the BUG(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: reorganize set_dac_channels()Clemens Ladisch
By reorganizing the code that sets the CHB3DxC bits we can not only simplify this code but also fix the bug where the CHB3D8C bit was not reset when playing a stereo stream after a 7.1 stream. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: remove 5.0 formatClemens Ladisch
Disallow playback of five channels because the hardware does not support it (or nobody knows how to do it). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: allow 96 kHz playback on non-multichannel rearClemens Ladisch
Move the code that enables 96 kHz out of the if() that checks for availability of both DMA channels so that it is enabled even when another stream is playing on the front channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: initialize 0x90 registersClemens Ladisch
Initialize the registers at 0x90 and 0x91 with some undocumented values. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: reset the chip when initializingClemens Ladisch
When the chip is initialized, reset it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: show more registers in proc fileClemens Ladisch
Show a dump of all registers in the 0x00-0x27 and 0x90-0x93 ranges in the 'cmipci' proc file. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: update register definitionsClemens Ladisch
Update comments for many register symbols, add some new register symbols, and rename a few ones. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: fix version 37 detectionClemens Ladisch
Use the proper value for the bit that identifies chip version 37. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] bt87x: fix detection of generic boardsClemens Ladisch
Add an 'unknown' board type so that it is possible to differentiate between unknown and generic boards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] usb-audio: add Ozone Academic supportClemens Ladisch
Add a quirk to detect the MIDI port on the M-Audio Ozone Academic. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] SC6000 driver - add HAS_IOPORT dependencyJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] echoaudio - Remove superfluous volatile prefixTakashi Iwai
Remove superfluous volatile prefix in the communication struct definition. This eventually fixes the compile warnings with the recent gcc, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Add description of sc6000 driverTakashi Iwai
Added the description of the new sc6000 driver to ALSA-Configuration.txt. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Gallant SC-6000 driverKrzysztof Helt
This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver. This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio Plus True 16). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-intel - Improve HD-audio codec probing robustnessDanny Tholen
When modem is disabled in the BIOS, detection of the number of codecs always fails after booting if STATESTS is not cleared first. This patch fixes this problem and also adds an error check in a place where a read error would lead to a very large number of pointless loops. Signed-off-by: Danny Tholen <obiwan@mailmij.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] pcxhr - Fix trigger start with non-linked streamsTakashi Iwai
The non-linked streams couldn't be started properly due to missing setting of stream->status. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Fix CS4270 volume control and optimize I2C operationsTimur Tabi
The volume control for the CS4270 ASoC driver was inverted - raising the volume level with alsamixer would decrease the actual volume. This patch also improves the performance of the I2C code (used to change register settings) by only performing an I2C write if the new value is different from the value that's in the register cache. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cs4231-lib: improved waiting after mce_downKrzysztof Helt
This patch replaces long msleeps in waiting loops with schedule_timeout() calls. Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Kill useless volatile in pcm.hTakashi Iwai
The volatile prefix is just useless there. Let's kill them, and then gcc will be happier, too. sound/acore/pcm.c:867: warning: passing argument 1 of ‘__constant_c_and_count_memset’ discards qualifiers from pointer target type Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Fix 'discards qualifiers' compile warnings in pcm.hTakashi Iwai
Fixed cast messes in pcm.h. include/sound/pcm.h: In function ‘hw_param_interval_c’: include/sound/pcm.h:800: warning: passing argument 1 of ‘hw_param_interval’ discards qualifiers from pointer target type Simply redefine the inline functions again for const pointers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ad1848/cs4231: replace commented out debug code with snd-printd{,d}Rene Herman
While I'm at it another 'while I'm there' -- replace commented out debug code with snd-printd{,d}. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ad1848: replace HZ calculus with msecs_to_jiffies()Rene Herman
If I'm not mistaken, any (new) use of HZ these days is considered a bug so while I'm there... Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ad1838/cs4231 - fix MCE timeout upon initial loadRene Herman
When the ad1848/cs2431 is first being initialized, auto-calibration may not be set causing a timeout waiting for it in snd_ad1848/cs4231_mce_down(). This has no dire consequences other than an alarming printk, but since what we need to wait for is for the calibration to _finish_, let's just check for that instead. The early chips need a slight delay (as commented -- 5 sample periods) to be sure that _if_ calibration is going to happen, it has started when we check While the CS4231A datasheet implies it'll happen immediately on downing MCE, some testing is showing that there's a window there as well, so just do the delay everywhere. Thanks to Krysztof Helt for pinpointing this problem. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] au88x0_synth.c bugfixAdrian Bunk
This patch fixes the code in vortex_wt_SetFrequency() to what seems to have been intended. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 06:01:46 +0000