aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-07ath5k: Add 2413 to srev_names so that it shows up during module loadNick Kossifidis
Add 2413 to srev_names so that it shows up during module load. This is based on the new patch 7 which did not introduce a helper on ath5k_hw_reset(). Changes-licensed-under: 3-clause-BSD Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07ath5k: Make some changes to follow register dumps.Nick Kossifidis
Make some changes which mimic what we see in register dumps. This patch does not add a helper to ath5k_hw_reset(). It does seem clear we need a re-shuffle around ath5k_hw_reset() though as code in there is lengthy and already hitting 80-char limit. This can be dealt with later though. Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07ath5k: Fixes for PCI-E cardsNick Kossifidis
* Fix nic_wakeup for PCI-E chips (don't set AR5K_RESET_CTL_PCI bit) * Fix dma size setting for PCI-E chips (thanx to Bob Copeland). Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07ath5k: Remove RF5413 from rf gain optimization functionsNick Kossifidis
* Since RF2413 it seems that RF_BUFFER settings are different (notice that the last part -"bank 7" or whatever- is smaller than in 5111/5112). So until we know what's going on we assume there is no gain optimization stuff in post-5112 chips. Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07ath5k: more RF2413 stuffNick Kossifidis
* Add AR5K_RF2413 to radio check during hw_reset so it doesn't complain * Write ah_phy_spending value we set during attach instead of checking each time for radio revision * Skip txpower setup for RF2413 because it can't transmit with it (weird thing is that RF5413 has no problem with it). Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07ath5k: Identify RF2413 and deal with PHY_SPENDINGNick Kossifidis
* Attach RF2413. * Propertly handle different AR5K_PHY_SPENDING settings for each RF chip by adding a field in ath5k_hw. This way we won't have to check inside hw_reset (see next patch). Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07ath5k: Add RF2413 initial settingsNick Kossifidis
* Add initial settings for RF2413 Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07ath5k: Add RF2413 srev valuesNick Kossifidis
* Add RF2413 srev values and a new entry on ath5k_radio enum for it since it differs from RF5413 (it's not like 5112-2112). Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06zd1211rw: support for mesh interface and beaconingLuis Carlos Cobo
The previously unused CR_CAM_MODE register is set to MODE_AP_WDS. This makes the driver ack mesh (WDS) frames. It does not affect Infra functionality of the driver. Previously missing beaconing support has been added. This might also help implement a currently missing ah-hoc mode. Support for interrupts from the device have been added, but we are not handling most of them. Mesh interfaces are considered associated as long as the interface is up. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06libertas: clean up scan.c, remove zeromac and bcastmacDavid Woodhouse
Should be purely cosmetic apart from the removal of the two pointless MAC addresses. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06libertas: convert 802_11_SCAN to a direct commandDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06libertas: add LED control TLV to types.hDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06libertas: convert KEY_MATERIAL to a direct commandDavid Woodhouse
The struct enc_key probably wants to die too, but that can come later. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06iwlwifi: Fix 52 rate report in rx statusTomas Winkler
This patch fixes reporting rate in RX packets in 52 band. The rate was updated from CCK rate index instead of OFDM rate 6M Most of the patch is collateral clean up Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06iwlwifi: refactor init geos functionTomas Winkler
This patch refactors init geos function. It also fixes few minor bugs. IWL_MAX_RATE -> IWL_RATE_COUNT (IWL_MAX_RATE included also MCS setting) There are 9 and 13 rates for 4965 in 2.4 and 5.2 respectively (rate 60) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06iwlwifi: removing unused priv->configTomas Winkler
This patch removes unused variable in iwlYYYY_priv Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06ssb: Add Gigabit Ethernet driverMichael Buesch
This adds the Gigabit Ethernet driver for the SSB Gigabit Ethernet core. This driver actually is a frontend to the Tigon3 driver. So the real work is done by tg3. This device is used in the Linksys WRT350N. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: fix hardware scan completionJohannes Berg
The mac80211 MLME requires restarting timers after a scan completes but this wasn't done when hardware scan offload was added, so add it now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Bill Moss <bmoss@clemson.edu> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: fix mesh_path and sta_info get_by_idx functionsLuis Carlos Cobo
Skip properly entries whose dev does not match. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: path IE fields macros, fix alignment problems and clean upLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: add PLINK_ prefix and kernel doc to enum plink_stateLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: always force mesh_path deletionsLuis Carlos Cobo
Postponing the deletion is not really useful anymore. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: delete mesh_path timer on mesh_path removalLuis Carlos Cobo
This avoids dereferencing a no longer existing struct mesh_path. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: clean up use of endianness conversion functionsLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: breakdown mesh network attributes in different extra fields for wextLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: move comment to better locationLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: fix incorrect parenthesisLuis Carlos Cobo
Pointed out by Johannes Berg. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: fix mesh endianness sparse warnings and unmark it as brokenLuis Carlos Cobo
This patch fixes all the mesh related endianness warnings reported by sparse. As they were the reason why Johannes marked mesh as BROKEN, that flag has been removed. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: always insert key into listJohannes Berg
Today I hit one of my new WARN_ONs in the mac80211 code because a key wasn't being freed correctly. After wondering for a while I finally tracked it to the fact that STA keys aren't added to the per-sdata key list correctly, they are supposed to always be on that list, not just for default keys. This patch fixes that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06b43: verify sta_notify mac80211 callbackJohannes Berg
This helps verify that nothing bad is going on in mac80211, it is unfortunately not possible to implement this generically in mac80211 easily because there we can't assume that we only have a single vif which b43 currently can assume. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: fix sta_info mesh timer bugJohannes Berg
I noticed a bug I introduced when mesh is enabled: sta_info_destroy() will end up calling cancel_timer() on a timer that has never been initialized because the timer is only initialized in mesh_plink_alloc(), not in sta_info_alloc(). This patch moves the initialization of all mesh related fields into sta_info_alloc(), adds a bit of sanity checking to the cfg80211 handlers and sta_info_insert() and makes mesh_plink_alloc() a static helper function that is only used from the mesh plink code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: add documentation bookJohannes Berg
Quite a while ago I started this book. The required kernel-doc patches have since gone into the tree so it is now possible to build the book in mainline. The actual documentation is still rather incomplete and not all things are linked into the book, but this enables us to edit the documentation collaboratively, hopefully driver authors can add documentation based on their experience with mac80211. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: don't clear next_hop in path reclaimJohannes Berg
Luis pointed out that this path is going to be freed right away anyway so there's no point in assigning next_hop. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: remove STA entries when taking down interfaceJohannes Berg
When we take down an interface, we need to remove the STA info items that belong to it because otherwise we might invoke a sta_notify() callback in the driver when we later delete the STA entries, but in that case the driver will already have removed its knowledge of the interface they belonged to leading to confusion. Also, we could invoke the set_tim() callback after the driver removed its knowledge of the interface, which can lead to a crash if it requests a beacon with a then-invalid vif pointer! A side effect of this patch is that, because it was easier, it disallows changing the WDS peer while an interface is up. Should that actually be necessary, it can be added back, but the WDS peer STA entry may not be added while the interface is UP so for now I've simplified the WDS peer's STA entry lifetime management. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: clean up sta_info and document lockingJohannes Berg
This patch cleans up the sta_info struct and documents how each set of variables is locked. Notably, flags locking is completely missing. It also adds kernel-doc for some (but not all yet) members of the struct. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: split sta_info_addJohannes Berg
sta_info_add() has two functions: allocating a station info structure and inserting it into the hash table/list. Splitting these two functions allows allocating with GFP_KERNEL in many places instead of GFP_ATOMIC which is now required by the RCU protection. Additionally, in many places RCU protection is now no longer needed at all because between sta_info_alloc() and sta_info_insert() the caller owns the structure. This fixes a few race conditions with setting initial flags and similar, but not all (see comments in ieee80211_sta.c and cfg.c). More documentation on the existing races will be in a follow-up patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: RCU-ify STA info structure accessJohannes Berg
This makes access to the STA hash table/list use RCU to protect against freeing of items. However, it's not a true RCU, the copy step is missing: whenever somebody changes a STA item it is simply updated. This is an existing race condition that is now somewhat understandable. This patch also fixes the race key freeing vs. STA destruction by making sure that sta_info_destroy() is always called under RTNL and frees the key. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: split ieee80211_txrx_dataJohannes Berg
Split it into ieee80211_tx_data and ieee80211_rx_data to clarify usage/flag usage and remove the stupid union thing. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: reorder a few fields in sta_infoJohannes Berg
Three __le16s followed by an enum (int) leave a two-byte hole of padding which we can use for two of the other fields. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: fix kernel-doc comment for mesh_plink_deactivateJohannes Berg
Accidentally copied in a __mesh_plink_deactivate, noticed by Luis Carlos Cobo. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: clean up mesh RX path a bit moreJohannes Berg
Moves another ifdef into the sta_info header file in favour of compiling more code even w/o CONFIG_MAC80211_MESH. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: export mesh_plink_brokenJohannes Berg
This needs to be exported because rate control algorithms can be modular. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: clarify mesh KconfigJohannes Berg
This clarifies that the mesh networking code is currently based on Draft 1.08 of the 802.11 Mesh Networking amendment. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: add missing "break" statement in mesh codeJohannes Berg
This inserts a missing break statement which, if hit, would cause the code to fall-through and unlock a spinlock twice. Noticed via sparse's "lock count wrong in basic block" warning and careful code inspection. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: enable mesh in KconfigJohannes Berg
Currently marked BROKEN because of endianness problems. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: mesh hwmp locking fixesJohannes Berg
This fixes missing unlocks noticed by sparse. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: clean up mesh codeJohannes Berg
Various cleanups, reducing the #ifdef mess and other things. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: complete the mesh (interface handling) codeLuis Carlos Cobo
This completes the mesh interface handling code and a few other bits about the mac80211 module. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: mesh path and mesh peer configurationLuis Carlos Cobo
This adds code to allow adding mesh interfaces and configuring mesh peers etc. Also, it adds code for station dumping. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-06mac80211: mesh statistics and config through debugfsLuis Carlos Cobo
This patch contains the debugfs code for mesh statistics and configuration parameters. Please note that generic support for r/w debugfs attributes has been added. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 00:13:08 +0000