aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13468): v4l2 doc: Added ROTATE and BG_COLOR control documentationVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13467): V4L2: Added CID's V4L2_CID_ROTATE/BG_COLORVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13466): Davinci VPFE Capture:Replaced IRQ_VDINT1 with ↵Vaibhav Hiremath
vpfe_dev->ccdc_irq1 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13465): Davinci VPFE Capture: Take i2c adapter id through platform dataVaibhav Hiremath
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13464): Davinci VPFE Capture: add i2c adapter id in platform dataVaibhav Hiremath
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13463): Davinci VPFE Capture: Specify device pointer in ↵Vaibhav Hiremath
videobuf_queue_dma_contig_init Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13460): v4l2-spec: add missing V4L2-PIX-FMT-STV0680 description.Hans Verkuil
[mchehab@redhat.com: fix the wrong videodev2.h.xml file] Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13455): go7007: Add struct v4l2_device.Pete Eberlein
This adds a struct v4l2_device to the go7007 device struct and registers it during v4l2 initialization. The v4l2_device registration overwrites the go->dev device_data, which is a struct usb_interface with intfdata set to the struct go7007. This changes intfdata to point to the struct v4l2_device inside struct go7007, which is what v4l2_device_register will also set it to (and warn about non-null drvdata on register.) Since usb disconnect can happen any time, this intfdata should always be present. Signed-off-by: Pete Eberlein <pete@sensoray.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13453): gspca - all subdrivers: Remove the unused frame ptr from ↵Jean-Francois Moine
pkt_scan(). Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13452): gspca - main: Let the driver scan URB packets when no frame ↵Jean-Francois Moine
buffer. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13451): gspca - main: Memorize the current frame buffer.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13450): gspca - main: Clear the urb status before resubmit.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13449): gspca - ov534: The AWB control works only when autogain is set.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13448): gspca - main: Add a gspca flag for inactive controls.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13446): ivtv: Add more explicit detection of known IR devices for ↵Andy Walls
Hauppauge cards Avoid legacy IR I2C probing for PVR-150, PVR-500, and PVR-350 cards. This still probes, but restricts the possbile addresses probed per card. Also removed legacy probe addresses for the KNC and PixelView cards which are not supported by ivtv as far as I know. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13445): cx18: Use per cx18 instance init data for ir-kbd-i2c ↵Andy Walls
instead of const data This change creates per cx18 instances of IR_i2c_init_data for handing over initialization data to ir-kbd-i2c, since that module wants non-const data even though it never modifies the data. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13444): ivtv: Add explicit IR controller initialization for the ↵Andy Walls
AVerTV M116 Add explicit support for the AVerTV M116 for use with the ir-kbd-i2c module. This also eases future support for other AVerMedia ivtv boards with the same microcontroller program at I2C address 0x40. This is a reworked version of an earlier patch that was... Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13443): ivtv: Defer legacy I2C IR probing until after setup of ↵Andy Walls
known I2C devices This avoids collisions of legacy IR controller probing with known I2C devices in the card definitions in ivtv-cards.c. I2C driver modules for device listed explicitly in a card definition should always take precedence over a probe guessing where and IR controller may be. Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13442): ivtv: Add module parameter to adjust I2C SCL clock period ↵Andy Walls
per board Add a module parameter to adjust I2C SCL clock period per board. This allows some experimental fine tuning by end users to overcome quirky I2C device problems. Reported-by: "Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13441): ivtv: Added FM radio support to Avermedia AVerTV MCE 116 ↵Aleksandr V. Piskunov
Plus card Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13440): ivtv: Update the cards definitions to add another AVerMedia ↵Andy Walls
M113 variant Add an AVerMedia M113 variant that was... Reported-by: Hiemanshu Sharma <hiemanshu@fedoraproject.org> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13438): zr364xx: add support for Trust Powerc@m 910ZAntoine Jacquet
Tested-by: Enrique Dominguez <enrique.pinos@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13434): cx18: Bump version number due to significant buffer ↵Andy Walls
handling changes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13433): cx18: Remove duplicate list traversal when processing ↵Andy Walls
incoming MDLs Update the incoming MDL's buffers' bytesused and sync the buffers for the cpu in one pass instead of two. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13432): cx18: Adjust encoder VBI MDL size to be exactly frame's ↵Andy Walls
worth of VBI data Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13431): cx18: Adjust an MDL's final buffer size to force encoder ↵Andy Walls
transfer size The encoder was not honoring the MDL size sent in DE_SET_MDL mailbox commands. This change adjusts the size of the last buffer in an MDL, as reported to the firmware, so that the encoder will send the exact amount of bytes we specify per MDL transfer. This eliminates tearing in YUV playback when using non-default YUV buffer sizes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13430): cx18: Fix YUV capture so that encoder passes a single frame ↵Andy Walls
per transfer Fix YUV capture such that the encoder will pass one frame per transfer. This will allow the application to maintain frame alignment when a transfer from the encoder is missed due to high system latency in service the CX23418 IRQ. Also force YUV buffer sizes to be specified in multiples of 33.75 kB, the smalled amount of buffer sizes need to store a complete set of HM12 4:2:0 macroblocks specifying 32 lines of the frame. A full 60Hz/525 line screen requires 15 * 33.75 kB per frame and a full 50Hz/625 line screen requires 18 * 33.75 kB per frame so the default buffer size is 3 * 33.75 kB, requiring exactly 5 or 6 buffers per MDL respectively. The bytes needed per frame and hence MDL need not be the bytes in an integer number of buffers. However, if frame artifacts are seen with scaled screen sizes, the YUV buffer size can be set 34 kB (33.75 kB) to get rid of the artifacts at the cost of more copies between the kernel and userspace. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13429): cx18: Add Memory Descriptor List (MDL) layer to buffer handlingAndy Walls
Add a Memory Descriptor List (MDL) layer to buffer handling to implement scatter-gather I/O. Currently there is still only 1 buffer per MDL. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13428): cx18: Rename mdl_offset to mdl_base_idx or free_mdl_idx as ↵Andy Walls
appropriate Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13427): cx18: Rename struct cx18_queue.buffers to struct ↵Andy Walls
cx18_queue.depth Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13426): cx18: Rename struct cx18_mdl to struct cx18_mdl_entAndy Walls
Rename type in anticipation of implementing a struct cx18_mdl type that actually keeps track of a memory descriptor list. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13425): gspca - ov534: Bad name of the ov965x 320x240 resolution.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13424): gspca - ov534: Fix ov772x brightness and ov965x frame rate.Jean-Francois Moine
- the ov772x brightness was not setteble (fixed by M. Thrun) - the set_frame_rate function does not work for ov965x Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13423): gspca - ov534: More ov772x changes from Max Thrun.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.Jean-Francois Moine
- 320x240 resolution added - controls added - different sd_desc tables Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13421): gspca - main: Clearer message when bandwidth too small.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13420): gspca - doc: Change the name of some webcams.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13419): gspca - pac7302: Add debug register write interface.Márton Németh
Add debug register write interface to pac7302 to be able to set for example the edge detect mode (bit 2 register 0x55) or the test pattern (bit 0..3, register 0x72) and test overlay (bit 4, register 0x72) from the user space. Only write of register page 0 is supported by this patch. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13418): gspca - pac7311: Stop sending URBs on first error.Márton Németh
Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13417): Fix videobuf_queue_vmalloc_init() prototypeJonathan Corbet
For whatever reason, the device structure pointer to videobuf_queue_vmalloc_init is typed "void *", even though it's passed right through to videobuf_queue_core_init(), which expects a struct device pointer. The other videobuf implementations use struct device *; I think vmalloc should too. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13416): smssdio: initialize return valueMárton Németh
The return value may be used uninitialized when the size parameter happens to be 0. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13415): videobuf-core: explicitly cast page countMárton Németh
Explicitly cast page count in the debug message. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13414): ttusb-dec: do not overwrite the first part of phys stringMárton Németh
Use strlcat() to append a string to the previously created first part. The semantic match that finds this kind of problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression dev; expression phys; expression str; expression size; @@ usb_make_path(dev, phys, size); - strlcpy(phys, str, size); + strlcat(phys, str, size); // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13413): introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. Similarly for usb-alloc urb. The semantic match that finds the first problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB: Fix test in copy_reg_bits()Roel Kluin
The reg_pair2[j].reg was tested twice. Cc: <stable@kernel.org> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13410): firedtv: remove an unnecessary function argumentStefan Richter
All read transactions initiated by firedtv are only quadlet-sized, hence the backend->read call can be simplified a little. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13409): firedtv: packet requeuing is likely to succeedStefan Richter
Packet DMA buffers are queued either initially all at once (then, a queueing failure will cause firedtv to release the DMA context as a whole) or subsequently one by one as they recycled after use (then a failure is extremely unlikely). Therefore we can be a little less cautious when counting at which packet buffer to set the interrupt flag. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13408): firedtv: shrink buffer pointer tableStefan Richter
Cache only addresses of whole pages, not of each buffer chunk. Besides, page addresses can be obtained by page_address() instead of kmap() since they were allocated in lowmem. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13407): Add Prof 7301 PCI DVB-S2 cardIgor M. Liplianin
Add Prof 7301 PCI DVB-S2 card The card based on stv0903 demod, stb6100 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB: pt1: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/media/dvb/pt1/pt1.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>