aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-08-01rt2500pci: restoring missing linePeter Chubb
In kernel version 2.6.26-rc9 my wireless LAN card worked; but in the released 2.6.26, my RaLink rt2500 card wouldn't associate. Git-bisect led me to this patch: 61486e0f68d1f8966c09b734566a187d42d65c54 rt2x00: Remove ieee80211_tx_control argument from write_tx_desc() I believe that there is a problem with that patch --- it (inadvertantly) removes an extra line of code, that used to set the DATABYTE_COUNT field. This patch reinstates that line, and with it my card works again. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01libertas: only enable rtap with mesh firmwareDan Williams
Since only mesh-enabled firmware has the CMD_802_11_MONITOR_MODE on which the rtap functionality depends, only expose the rtap functionality when mesh is also available. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01rt2x00: Sequence counter should be protected in irqsaveIvo van Doorn
The sequence counter can be accessed in IRQ context, which means the lock protecting the counter should be irqsave. To prevent making the entire intf->lock irqsave without reason, create a new lock which only protects the sequence counter. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01rt2x00: Fix VGC lower bound initializationIvo van Doorn
When the EEPROM_BBPTUNE_VGC word is valid, we should override EEPROM_BBPTUNE_VGCLOWER field with the BBP value. And we should _not_ do that when EEPROM_BBPTUNE_R17 is valid. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01rt2x00: rt61pci needs another millisecond after firmware uploadIvo van Doorn
After the hardware has indicated the firmware upload has completed and the device is ready, we should wait another millisecond to make sure the device is really ready to continue. Without this timout, bringing the interface down and up again will fail due to incorrect register initialization. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01rt2x00: Fix partial antenna configurationIvo van Doorn
The if-statement to determine the new TX/RX antenna configuration was incomplete. It lacks the general else-clause when the antenna wasn't changed. This is a correct event, since it can occur when only one of the antenna's has been changed or when the new configuration is being forced (like when the interface has just been added). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01rt2x00: Fix access permissions on debugfs filesIvo van Doorn
Although most rt2x00 debugfs files don't contain information which could compromise network security, it is better to set the access permissions to root only. This will be required when HW crypto is implemented, because it could be possible to read the HW key from the registers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01Rtl8187 PATCH add usb ID for asus wireless linkAndrea Merello
This patch from Davide Cavalca adds a usb ID for an rtl8187L device. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01iwlwifi: don't stop queue in the middle of fragmented packetTomas Winkler
This patch avoids stopping queue in the middle of the fragmented packet. It is required that there will be ~10 (max packet/min fragment) or 16 (4 bits of frag number) free tfds all the time. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: remove obsolete declaration of struct ieee80211_hw_modeHelmut Schaa
Signed-off-by: Helmut Schaa <hschaa@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01mac80211: fix fragmentation kludgeTomas Winkler
This patch make mac80211 transmit correctly fragmented packet after queue was stopped Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01Ath5k: mask out unneeded interruptsJiri Slaby
Mask out previously demanded interrupt flags because we set new ones. Don't allow mixing them after switch from sta to ibss and vice versa. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01RFKILL: set the status of the leds on activation.Dmitry Baryshkov
Provide default activate function to set the state of the led when the led becomes bound to the trigger Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01RFKILL: allow one to specify led trigger nameDmitry Baryshkov
Allow the rfkill driver to specify led trigger name. By default it still defaults to the name of rfkill switch. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01rfkill: query EV_SW states when rfkill-input (re)?connects to a input deviceHenrique de Moraes Holschuh
Every time a new input device that is capable of one of the rfkill EV_SW events (currently only SW_RFKILL_ALL) is connected to rfkill-input, we must check the states of the input EV_SW switches and take action. Otherwise, we will ignore the initial switch state. We also need to re-check the states of the EV_SW switches after a device that was under an exclusive grab is released back to us, since we got no input events from that device while it was grabbed. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Update phy calibration functionsNick Kossifidis
* Enable I/Q calibration each time we have correction results (we were only enabling calibration during reset). If we don't we commit the same results each time calibration routine is called. * Add some documentation and a TODO on nf calibration * Return -EAGAIN on noise floor timeout/failure Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Update channel functionsNick Kossifidis
* Add channel function for RF2425 (got this from decompiling binary HAL, i have no idea why there is a 5GHz section but i'm looking into it) * Update RF5112 channel function (also got this from decompiling binary HAL) * Set JAPAN setting for channel 14 on all PHY chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Add RF2425 initial rfgain valuesNick Kossifidis
* Add initial RF gain settings for RF2425 Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Reorder calibration calls during reset and update hw_set_powerNick Kossifidis
* Update ath5k_hw_reset and add some more documentation about PHY calibration * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep * Preserve sleep duration field while setting AR5K_SLEEP_CTL and reduce delays & checks for register's status (got this from decompiling & dumps, it works for me but it needs testing) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Do ADC test during resetNick Kossifidis
* Do an ADC test during reset to match recent regdumps Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Misc hw_reset updatesNick Kossifidis
* Update hw_reset to calculate some of the values we were using as static * Increase activation to rx delay Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Misc hw_attach fixesNick Kossifidis
* Correctly attach RF2425 * Update SREV values for Radio chips * Update hw_attach to use new SPENDING values * Write a bit after POST for some chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Restore saved initval after POSTNick Kossifidis
* Restore saved initial value after POST Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Update register listNick Kossifidis
* Update list of registers * Use updated register macros inside hw.c, initvals.c and debug.c Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-31tcp: MD5: Fix IPv6 signaturesAdam Langley
Reported by Stefanos Harhalakis; although 2.6.27-rc1 talks to itself using IPv6 TCP MD5 packets just fine, Stefanos noted that tcpdump claimed that the signatures were invalid. I broke this in 49a72dfb8814c2d65bd9f8c9c6daf6395a1ec58d ("tcp: Fix MD5 signatures for non-linear skbs"), it was just a typo. Note that tcpdump will still sometimes claim that the signatures are incorrect. A patch to tcpdump has been submitted for this[1]. [1] http://tinyurl.com/6a4fl2 Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31skbuff: add missing kernel-doc for do_not_encryptRandy Dunlap
Add missing kernel-doc notation to sk_buff: Warning(linux-2.6.27-rc1-git2//include/linux/skbuff.h:345): No description found for parameter 'do_not_encrypt' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31net/ipv4/route.c: fix build errorIngo Molnar
fix: net/ipv4/route.c: In function 'ip_static_sysctl_init': net/ipv4/route.c:3225: error: 'ipv4_route_path' undeclared (first use in this function) net/ipv4/route.c:3225: error: (Each undeclared identifier is reported only once net/ipv4/route.c:3225: error: for each function it appears in.) net/ipv4/route.c:3225: error: 'ipv4_route_table' undeclared (first use in this function) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31tcp: MD5: Fix MD5 signatures on certain ACK packetsAdam Langley
I noticed, looking at tcpdumps, that timewait ACKs were getting sent with an incorrect MD5 signature when signatures were enabled. I broke this in 49a72dfb8814c2d65bd9f8c9c6daf6395a1ec58d ("tcp: Fix MD5 signatures for non-linear skbs"). I didn't take into account that the skb passed to tcp_*_send_ack was the inbound packet, thus the source and dest addresses need to be swapped when calculating the MD5 pseudoheader. Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31ipv6: Fix ip6_xmit to send fragments if ipfragok is trueWei Yongjun
SCTP used ip6_xmit() to send fragments after received ICMP packet too big message. But while send packet used ip6_xmit, the skb->local_df is not initialized. So when skb if enter ip6_fragment(), the following code will discard the skb. ip6_fragment(...) { if (!skb->local_df) { ... return -EMSGSIZE; } ... } SCTP do the following step: 1. send packet ip6_xmit(skb, ipfragok=0) 2. received ICMP packet too big message 3. if PMTUD_ENABLE: ip6_xmit(skb, ipfragok=1) This patch fixed the problem by set local_df if ipfragok is true. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31ipvs: Move userspace definitions to include/linux/ip_vs.hJulius Volz
Current versions of ipvsadm include "/usr/src/linux/include/net/ip_vs.h" directly. This file also contains kernel-only definitions. Normally, public definitions should live in include/linux, so this patch moves the definitions shared with userspace to a new file, "include/linux/ip_vs.h". This also removes the unused NFC_IPVS_PROPERTY bitmask, which was once used to point into skb->nfcache. To make old ipvsadms still compile with this, the old header file includes the new one. Thanks to Dave Miller and Horms for noting/adding the missing Kbuild entry for the new header file. Signed-off-by: Julius Volz <juliusv@google.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netdev: Fix lockdep warnings in multiqueue configurations.David S. Miller
When support for multiple TX queues were added, the netif_tx_lock() routines we converted to iterate over all TX queues and grab each queue's spinlock. This causes heartburn for lockdep and it's not a healthy thing to do with lots of TX queues anyways. So modify this to use a top-level lock and a "frozen" state for the individual TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netfilter: xt_hashlimit: fix race between htable_destroy and htable_gcPavel Emelyanov
Deleting a timer with del_timer doesn't guarantee, that the timer function is not running at the moment of deletion. Thus in the xt_hashlimit case we can get into a ticklish situation when the htable_gc rearms the timer back and we'll actually delete an entry with a pending timer. Fix it with using del_timer_sync(). AFAIK del_timer_sync checks for the timer to be pending by itself, so I remove the check. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulationsPavel Emelyanov
The thing is that recent_mt_destroy first flushes the entries from table with the recent_table_flush and only *after* this removes the proc file, corresponding to that table. Thus, if we manage to write to this file the '+XXX' command we will leak some entries. If we manage to write there a 'clean' command we'll race in two recent_table_flush flows, since the recent_mt_destroy calls this outside the recent_lock. The proper solution as I see it is to remove the proc file first and then go on with flushing the table. This flushing becomes safe w/o the lock, since the table is already inaccessible from the outside. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledgedPatrick McHardy
In order to time out dead connections quicker, keep track of outstanding data and cap the timeout. Suggested by Herbert Xu. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30irda: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30nsc-ircc: default to dongle type 9 on IBM hardwareMatthew Garrett
This is necessary to set the dongle type on the nsc driver in order to get it to work correctly. Thinkpads all appear to use dongle type 9. This patch defaults nsc devices with an IBM PnP descriptor to use type 9. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Ben Collins <ben.collins@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-30bluetooth: add quirks for a few hci_usb devicesMichael Frey
Preface: The "Broadcom" device is on unreleased hardware, so I can't disclose the actual model. When the Dell 370 and 410 BT adapters are put into BT radio mode, they need to be prepared like many other Broadcom adapters. Also, add quirk Broadcom 2046 devices with HCI_RESET. Reference for this bug: https://launchpad.net/bugs/249448 Signed-off-by: Michael Frey <michael.frey@canonical.com> Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Ben Collins <ben.collins@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30hysdn: remove the packed attribute from PofTimStamp_tagDavid Howells
Remove the packed attribute from PofTimStamp_tag in the hysdn driver as the thing being packed is just an array of chars and so is unpackable. This deals with a compiler warning: In file included from drivers/isdn/hysdn/hysdn_boot.c:19: drivers/isdn/hysdn/hysdn_pof.h:63: warning: 'packed' attribute ignored for field of type 'unsigned char[40]' Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30isdn: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30tg3: adapt tg3 to use reworked PCI PM codeRafael J. Wysocki
Adapt the tg3 driver to use the reworked PCI PM and make it use the exported PCI PM core functions instead of accessing the PCI PM registers directly by itself. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30atm: fix direct casts of pointers to u32 in the InterPhase driverDavid Howells
Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30atm: fix const assignment/discard warnings in the ATM networking driverDavid Howells
Fix const assignment/discard warnings in the ATM networking driver. The lane2_assoc_ind() function needed its arguments changing to match changes in the lane2_ops struct (patch 61c33e012964ce358b42d2a1e9cd309af5dab02b "atm: use const where reasonable"). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30net: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30random32: seeding improvementStephen Hemminger
The rationale is: * use u32 consistently * no need to do LCG on values from (better) get_random_bytes * use more data from get_random_bytes for secondary seeding * don't reduce state space on srandom32() * enforce state variable initialization restrictions Note: the second paper has a version of random32() with even longer period and a version of random64() if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-30bridge: send correct MTU value in PMTU (revised)Simon Wunderlich
When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-30drivers/net/ehea/ehea_main.c: Release mutex in error handling codeJulia Lawall
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30sh_eth: Add support of SH7763 to sh_ethNobuhiro Iwamatsu
SH7763 has Ethernet core same as SH7710/SH7712. Positions of some registry are different, but the basic part is the same. I add support of ethernet of sh7763 to sh_eth. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30fix NE2000 linkage errorMikael Pettersson
Trying to build with CONFIG_NE2000=m fails with: scripts/mod/modpost -o /tmp/tmp/linux-2.6.27-rc1/Module.symvers -S -s ERROR: "NS8390_init" [drivers/net/ne.ko] undefined! This is because the split of 8390 into pausing and non-pausing versions was incompletely propagated to ne.c. This fixes it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30net: Make "networking" one-click deselectable.Robert P. J. Day
Use a menuconfig directive to make all of networking support one-click deselectable from the top-level menu. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 05:12:16 +0000