aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-09-23[SCSI] zfcp: fix: use correct req_id in eh_abort_handlerAndreas Herrmann
zfcp's eh_abort_handler used the wrong request ID to identify the request to be aborted. The bug was introduced with commit fea9d6c7bcd8ff1d60ff74f27ba483b3820b18a3 for improved management of request IDs. The bug is fixed with this patch. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] zfcp: create private slab caches to guarantee proper data alignmentHeiko Carstens
Create private slab caches in order to guarantee proper alignment of data structures that get passed to hardware. Sidenote: with this patch slab cache debugging will finally work on s390 (at least no known problems left). Furthermore this patch does some minor cleanups: - store ptr for transport template in struct zfcp_data Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Compile fix ups and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] zfcp: remove zfcp_ccw_unregister functionHeiko Carstens
Remove unused zfcp_ccw_unregister function (leftover from zfcp's module_exit era). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic7xxx: pause sequencer before touching SBLKCTLDoug Ledford
Some cards need to pause the sequencer before the SBLKCTL register is touched. This fixes a PCI related oops seen on powerpc macs with this card caused by trying to ascertain the bus signalling before beginning domain validation. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic7xxx: avoid checking SBLKCTL register for certain cardsJames Bottomley
For cards that don't support LVD, checking the SBLKCTL register to determine the bus singalling doesn't work. So, check that the card supports LVD first (AHC_ULTRA2) before checking the register. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] scsi_debug version 1.80Douglas Gilbert
See http://www.torque.net/sg/sdebug26.html for more information on the scsi_debug driver. ChangeLog: - add 'vpd_use_hostno' parameter to allow simulated hosts to see the same set of targets (and luns). For testing multipath software. - add 'fake_rw' parameter to ignore the data in READ and WRITE commands - add support for log subpages (new in SPC-4) - yield appropriate block descriptor for MODE SENSE commands (only for pdt=0 (i.e. disks)) - REQUEST SENSE response no longer shows the stopped power condition (SAT changed to agree with SPC-3) Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23Merge mulgrave-w:git/scsi-misc-2.6James Bottomley
Conflicts: drivers/scsi/iscsi_tcp.c drivers/scsi/iscsi_tcp.h Pretty horrible merge between crypto hash consolidation and crypto_digest_...->crypto_hash_... conversion Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[PATCH] more get_property() falloutAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[PATCH] briq_panel: read() and write() get __user pointers, damnitAl Viro
annotated, fixed a roothole in ->write(). Dereferencing user-supplied pointer is a Bad Idea(tm)... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[PATCH] #elif that should've been #elif definedAl Viro
#elif CONFIG_44x in ibm4xx.h should've been #elif defined(CONFIG_44x) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[PATCH] more fallout from get_property returning pointer to constAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[PATCH] missing includes from infiniband mergeAl Viro
indirect chains of includes are arch-specific and can't be relied upon... (hell, even attempt to build it for itanic would trigger vmalloc.h ones; err.h triggers on e.g. alpha). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[CRYPTO] hmac: Fix hmac_init update callHerbert Xu
The crypto_hash_update call in hmac_init gave the number 1 instead of the length of the sg list in bytes. This is a missed conversion from the digest => hash change. As tcrypt only tests crypto_hash_digest it didn't catch this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[KERNEL] Do not truncate to 'int' in ALIGN() macro.David Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-23[SCSI] megaraid: Make megaraid_ioctl() check copy_to_user() return valueJesper Juhl
Check copy_to_user() return value in drivers/scsi/megaraid.c::megadev_ioctl() This gets rid of this little warning: drivers/scsi/megaraid.c:3661: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: "Ju, Seokmann" <Seokmann.Ju@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aha152x: remove static host arrayJames Bottomley
Fix this driver not to use a static two element host array instead use a list. This should fix panic on multiple eject reinsert of the pcmcia version of this device. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic94xx: Fix for a typo in aic94xx_init()malahal@us.ibm.com
Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[SCSI] aic94xx: Removes Reliance on FLASH Manufacture IDsAlexis Bruemmer
This patch removes the reliance on FLASH Manufacture IDs for validation. Signed-off-by: Alexis Bruemmer <alexisb@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[MTD] Whitespace cleanup in SSFDC driver.David Woodhouse
Says akpm: ' - search for "( " and " )", fix.' Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-23[MTD] SSFDC translation layer minor cleanupDavid Woodhouse
Don't include <linux/config.h>. Don't say 'MB' where you mean 'MiB'. Don't allocate 512 bytes on the stack. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-23[MTD] Fix dependencies with CONFIG_MTD=mDavid Woodhouse
CMDLINEPARTS shouldn't be selectable, and neither should SSFDC, which can be a tristate anyway. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-23[ALSA] intel8x0m - Free irq in suspendTakashi Iwai
Free the irq handler in suspend and reacquire in resume as well as intel8x0 audio driver does. Some devices may change the irq line dynamically during suspend/resume. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Move CONFIG_SND_AC97_POWER_SAVE to pci/KconfigTakashi Iwai
Moved the entry of CONFIG_SND_AC97_POWER_SAVE from drivers/Kconfig to more appropriate place, pci/Kconfig. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] usb-audio: add mixer control names for the Aureon 5.1 MkIIClemens Ladisch
Add a mixer name map for the TerraTec Aureon 5.1 MkII USB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] ES1938: remove duplicate field initializationClemens Ladisch
Remove the duplicate and inconsistent initialization of the kcontrol access field. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] usb-audio: increase number of packets per URBClemens Ladisch
To decrease the USB interrupts rate, increase both the default and the maximum number of packets per URB. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Fix headphone auto-toggle on sigmatel codecTakashi Iwai
Fix/optimize the headphone auto-toggle function on sigmatel codecs. The headphone pins are kept as output. When headhpones are unplugged, you cannot hear anyway ;) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-intel - A slight cleanup of timeout check in azx_get_response()Takashi Iwai
A slight cleanup of timeout check in azx_get_response() to check jiffies for HZ-independent timeout. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Fix mic input with STAC92xx codecsTakashi Iwai
Fixed mic input with STAC92xx codecs. The mic pin was sometimes set to OUTPUT by the headphone jack detection. Also, try to assign a secondary mic as front-mic (or vice versa) in the auto-detection if possible. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] mixart: Use SEEK_{SET,CUR,END} instead of hardcoded valuesJosef 'Jeff' Sipek
mixart: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] gus: Use SEEK_{SET,CUR,END} instead of hardcoded valuesJosef 'Jeff' Sipek
gus: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] opl4: Use SEEK_{SET,CUR,END} instead of hardcoded valuesJosef 'Jeff' Sipek
opl4: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] sound core: Use SEEK_{SET,CUR,END} instead of hardcoded valuesJosef 'Jeff' Sipek
sound core: Use SEEK_{SET,CUR,END} instead of hardcoded values Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Support multiple headphone pinsTakashi Iwai
Some machines have multiple headpohne pins (usually on the lpatop and on the docking station) while the current hda-codec driver assumes a single headphone pin. Now it supports multiple hp pins (at least for detection). The sigmatel 92xx code supports this new multiple hp pins. It detects all hp pins for auto-muting, too. Also, the driver checks speaker pins in addition. In some cases, all line-out, speaker and hp-pins coexist. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda_intel prefer 24bit instead of 20bitNicolas Graziano
If I understand the hda_intel code, for format > 20bit it only advertise the SNDRV_PCM_FMTBIT_S32_LE format and play it at 32 bit, 20 bit or 24 bit. But if the 20bit and 24bit are available, actually it prefer the 20bit format. This path is to prefer the 24bit format instead of 20bit. Signed-off-by: Nicolas Graziano <nicolas.graziano@wanadoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Add vendor ids for Motorola and ConexantTakashi Iwai
Added string entries for Motorola and Conexant vendor ids. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Add device id for Motorola si3054-compatible codecTakashi Iwai
Added the device id for Motorola si3054-compatible modem codec on a Gateway laptop. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add missing compat ioctls for ALSA control APITakashi Iwai
Added the missing 32bit-compat ioctl entries for ALSA control API (espcially for recent additions of TLV stuff). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] powermac - Fix Oops when conflicting with aoa driverTakashi Iwai
Fixed Oops when conflictin with aoa driver due to lack of i2c initialization. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] aoa: add locking to tas codecJohannes Berg
Looks like I completely forgot to do this. This patch adds locking to the tas codec so two userspace programs can't hit the controls at the same time. Tested on my powerbook, but I obviously can't find any problems even without it since it doesn't do SMP. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-intel - Fix suspend/resume with MSITakashi Iwai
Fixed suspend/resume with MSI enablement. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] ak4xxx - Remove bogus IPGA controlsTakashi Iwai
Remove IPGA volume controls and merge the IPGA range to ADC volume controls. These two volumes are not really independent but connected simply in different ranges 0-0x7f and 0x80-max. It doesn't make sense to provide two controls. Since both 0x7f and 0x80 specify 0dB, a hack is needed for IPGA range to skip 0x80 (increment one) for such controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Fix WM9705 AC97 patch build errorLiam Girdwood
This patch fixes a build error (introduced by me) in ac97_patch.c wrt WM9705 touchscreen. o Removed spurious '3D' from character after |= operation (0x3D is ASCII for '=') Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Fix SPDIF device number of ALC codecsTakashi Iwai
Assign the SPDIF always to the secondary device (dev#1) to keep the same configuration. Move the optional capture device to the third device (dev#2). hda_intel now just ignores the NULL entries in the pcm arrays from codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-intel - Fix pci_disable_msi() callTakashi Iwai
Fix the order to call pci_disable_msi() to be after free_irq(). (Otherwise pci_disable_msi() bugs you.) Also, added a description of disable_msi option to documentation. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Add support for LG LW25 laptopTakashi Iwai
Added the support for LG LW25 laptop with ALC880 codec. It's the same codec model as LG LW20 (model=lg-lw). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add pcm_class attribute to PCM sysfs entryTakashi Iwai
This patch adds a new attribute, pcm_class, to each PCM sysfs entry. It's useful to detect what kind of PCM stream is, for example, HAL can check whether it's a modem or not. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] hda-codec - Add independent headphone volume controlTakashi Iwai
This patch addes the support of the independent 'Headphone' volume control to the generic codec parser. Some codecs (e.g. Conexant) have separate connections to the headphone and the independent amp adjustment is needed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] [snd-intel-hda] enable center/LFE speaker on some laptopsRichard Fish
This patch adds LFE mixer controls for laptops with a stac9200 and a mono speaker pin with amplifier. Signed-off-by: Richard Fish <bigfish@asmallpond.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23[ALSA] Add dB information to es1938 driverTakashi Iwai
Added the dB information to ESS Solo (es1938) driver. The new compound dB range TLVs are used for non-linear native volume controls. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 00:43:41 +0000