aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-12-21Initialize drivers/media/video/saa7134 lateLinus Torvalds
When compiled-in, make sure the sound system has initialized before these drivers do. Reported by Adrian Bunk <bunk@stusta.de> (The right fix would be to make the sound core use "subsys_initcall()" and thus initialize before all normal drivers, but this is the quick and limited safe fix for 2.6.15). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21[PATCH] usbcore: allow suspend/resume even if drivers don't support itAlan Stern
This patch (as618) changes usbcore to prevent derailing the suspend/resume sequence when a USB driver doesn't include support for it. This is a workaround rather than a true fix; the core needs to be changed so that URB submissions from suspended drivers can be refused and outstanding URBs cancelled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21[PATCH] USB Storage: Force starget->scsi_level in usb-storage scsiglue.cPaul Walmsley
When the usb-storage module forces sdev->scsi_level to SCSI_2, it should also force starget->scsi_level to the same value. Otherwise, the SCSI layer may attempt to issue SCSI-3 commands to the device, such as REPORT LUNS, which it cannot handle. This can prevent the device from working with Linux. The AMS Venus DS3 DS2316SU2S SATA-to-SATA+USB enclosure, based on the Oxford Semiconductor OXU921S chip, requires this patch to function correctly on Linux. The enclosure reports a SCSI-3 SPC-2 command set level, but does not correctly handle the REPORT LUNS SCSI command - probably due to a bug in its firmware. It seems likely that other USB storage enclosures with similar bugs will also benefit from this patch. Tony Lindgren <tony@atomide.com> collaborated in the development of this patch. Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21[PATCH] include/linux/irq.h: #include <linux/smp.h>Adrian Bunk
Jan's crosscompile page [1] shows, that one regression in 2.6.15-rc is that the v850 defconfig does no longer compile. The compile error is: <-- snip --> ... CC arch/v850/kernel/setup.o In file included from /usr/src/ctest/rc/kernel/arch/v850/kernel/setup.c:17: /usr/src/ctest/rc/kernel/include/linux/irq.h:13:43: asm/smp.h: No such file or directory make[2]: *** [arch/v850/kernel/setup.o] Error 1 <-- snip --> The #include <asm/smp.h> in irq.h was intruduced in 2.6.15-rc. Since include/linux/irq.h needs code from asm/smp.h only in the CONFIG_SMP=y case and linux/smp.h #include's asm/smp.h only in the CONFIG_SMP=y case, I'm suggesting this patch to #include <linux/smp.h> in irq.h. I've tested the compilation with both CONFIG_SMP=y and CONFIG_SMP=n on i386. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-21Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
2005-12-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-12-20[PATCH] relayfs: remove warning printk() in relay_switch_subbuf()Tom Zanussi
There's currently a diagnostic printk in relay_switch_subbuf() meant as a warning if you accidentally try to log an event larger than the sub-buffer size. The problem is if this happens while logging from somewhere it's not safe to be doing printks, such as in the scheduler, you can end up with a deadlock. This patch removes the warning from relay_switch_subbuf() and instead prints some diagnostic info when the channel is closed. Thanks to Mathieu Desnoyers for pointing out the problem and suggesting a fix. Signed-off-by: Tom Zanussi <zanussi@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[SPARC64]: Stop putting -finline-limit=XXX into CFLAGSDavid S. Miller
It was a stupid workaround for the "static inline" vs. "extern inline" issues of long ago, and it is what causes schedule() to be inlined like crazy into kernel/sched.c when -Os is specified. MIPS and S390 should probably do the same. Now CC_OPTIMIZE_FOR_SIZE can be safely used on sparc64 once more. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-20[PATCH] fix spinlock-debugging smp_processor_id() usageIngo Molnar
When a spinlock debugging check hits, we print the CPU number as an informational thing - but there is no guarantee that preemption is off at that point - hence we should use raw_smp_processor_id(). Otherwise DEBUG_PREEMPT will print a warning. With this fix the warning goes away and only the spinlock-debugging info is printed. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] Fix build with CONFIG_PCI_MMCONFIGAndi Kleen
Now needs to include the type 1 functions ("direct") too. Reported by Pavel Roskin <proski@gnu.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] nfsd: check for read-only exports before setting aclsAndreas Gruenbacher
We must check for MAY_SATTR before setting acls, which includes checking for read-only exports: the lower-level setxattr operation that eventually sets the acl cannot check export-level restrictions. Bug reported by Martin Walter <mawa@uni-freiburg.de>. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] kernel/params.c: fix sysfs access with CONFIG_MODULES=nJason Wessel
All the work was done to setup the file and maintain the file handles but the access functions were zeroed out due to the #ifdef. Removing the #ifdef allows full access to all the parameters when CONFIG_MODULES=n. akpm: put it back again, but use CONFIG_SYSFS instead. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] Fix swiotlb pci_map_sg error handlingAndi Kleen
The overflow checking condition in lib/swiotlb.c was wrong. It would first run a NULL pointer through virt_to_phys before testing it. Since pci_map_sg overflow is not that uncommon and causes data corruption (including broken file systems) when not properly detected I think it's better to fix it in 2.6.15. This affects x86-64 and IA64. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] Fix framebuffer console upside-down ywrap scrollingKnut Petersen
Whenever ywrap scrolling is selected together with 180 degree screen rotation, 2.6.15-rc6 and earlier versions are broken. fb_pan_display() expects non-negative yoffsets, but ud_update_start() calls it with yoffsets down to -(yres - font height). This patch transforms yoffset to the correct range 0 ... vyres-1. Some obviously unneeded parentheses are removed, too. Verified with cyblafb, should be applied before 2.6.15-final because it does fix the framebuffer rotation code introduced early in the 2.6.15 release cycle. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Acked-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-12-20Merge branch 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
2005-12-20[PATCH] intelfb: Fix oops when changing video modeAntonino A. Daplas
Reported by: janis huang (Bugzilla Bug 5747) Fix on oops in intelfb. Not sure what's happening, looks like dinfo->name pointer is invalidated after initialization. Remove intelfb_get_fix, it's not needed and move the majority of the code to the initialization routine. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] intelfb: Fix freeing of nonexistent resourceAntonino A. Daplas
Fix intelfb trying to free a non-existent resource in its error path. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] powerpc: g5 thermal overtemp bugBenjamin Herrenschmidt
The g5 thermal control for liquid cooled machines has a small bug, when the temperatures gets too high, it boosts all fans to the max, but incorrectly sets the liquids pump to the min instead of the max speed, thus causing the overtemp condition not to clear and the machine to shut down after a while. This fixes it to set the pumps to max speed instead. This problem might explain some of the reports of random shutdowns that some g5 users have been reporting in the past. Many thanks to Marcus Rothe for spending a lot of time trying various patches & sending log logs before I found out that typo. Note that overtemp handling is still not perfect and the machine might still shutdown, that patch should reduce if not eliminate such occcurences in "normal" conditions with high load. I'll implement a better handling with proper slowing down of the CPUs later. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20powerpc: update defconfigsPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-20[PATCH] powerpc: CPM2 interrupt handler failure after 100,000 interruptsEdson Seabra
The CPM2 interrupt handler does not return success to the IRQ subsystem, which causes it to kill the IRQ line after 100,000 interrupts. Signed-off-by: Edson Seabra <Edson.Seabra@cyclades.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-20powerpc: correct register usage in 64-bit syscall exit pathPaul Mackerras
Since we don't restore the volatile registers in the syscall exit path, we need to make sure we don't leak any potentially interesting values from the kernel to userspace. This was already the case for all except r11. This makes it use r11 for an MSR value, so r11 will have an (uninteresting) MSR value in it on return to userspace. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-19NLM: Fix Oops in nlmclnt_mark_reclaim()Trond Myklebust
When mixing -olock and -onolock mounts on the same client, we have to check that fl->fl_u.nfs_fl.owner is set before dereferencing it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19SUNRPC: Fix "EPIPE" error on mount of rpcsec_gss-protected partitionsTrond Myklebust
gss_create_upcall() should not error just because rpc.gssd closed the pipe on its end. Instead, it should requeue the pending requests and then retry. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19NFS: Fix another O_DIRECT raceTrond Myklebust
Ensure we call unmap_mapping_range() and sync dirty pages to disk before doing an NFS direct write. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19RPC: Do not block on skb allocationTrond Myklebust
If we get something like the following, [ 125.300636] [<c04086e1>] schedule_timeout+0x54/0xa5 [ 125.305931] [<c040866e>] io_schedule_timeout+0x29/0x33 [ 125.311495] [<c02880c4>] blk_congestion_wait+0x70/0x85 [ 125.317058] [<c014136b>] throttle_vm_writeout+0x69/0x7d [ 125.322720] [<c014714d>] shrink_zone+0xe0/0xfa [ 125.327560] [<c01471d4>] shrink_caches+0x6d/0x6f [ 125.332581] [<c01472a6>] try_to_free_pages+0xd0/0x1b5 [ 125.338056] [<c013fa4b>] __alloc_pages+0x135/0x2e8 [ 125.343258] [<c03b74ad>] tcp_sendmsg+0xaa0/0xb78 [ 125.348281] [<c03d4666>] inet_sendmsg+0x48/0x53 [ 125.353212] [<c0388716>] sock_sendmsg+0xb8/0xd3 [ 125.358147] [<c0388773>] kernel_sendmsg+0x42/0x4f [ 125.363259] [<c038bc00>] sock_no_sendpage+0x5e/0x77 [ 125.368556] [<c03ee7af>] xs_tcp_send_request+0x2af/0x375 then the socket is blocked until memory is reclaimed, and no progress can ever be made. Try to access the emergency pools by using GFP_ATOMIC. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-12-19Merge branch 'to_linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
2005-12-19[PATCH] md: Change case of raid level reported in sys/mdX/md/levelNeil Brown
I had thought that keeping the reported tail level clearly different from the module name was a good idea, but I've changed my mind. 'raid5' is better and probably less confusing than 'RAID-5'. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-19[PATCH] block: Cleanup CDROMEJECT ioctlBen Collins
This is just a basic cleanup. No change in functionality. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/tg3-2.6Linus Torvalds
2005-12-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-12-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-12-19Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-12-19[TG3]: Fix ethtool memory testMichael Chan
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test. Overwriting memory in this region can cause ASF problems. Update version and release date. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Add tw32_wait_f() for some sensitive registersMichael Chan
The tw32_f() function (register write with immediate read flush) can hang when used on some registers to switch clock frequencies and power. A new tw32_wait_f() is added for such registers with the delay before the read and after the read. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Some low power fixesMichael Chan
Add some missing workarounds in tg3_set_power_state(): 1. Workaround to prevent overdrawing current on 5714. 2. Do not power down 5700's PHY because of hw limitation. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Fix peer device handlingMichael Chan
Locate the pdev_peer for dual port 5714 NIC devices in addition to 5704 devices. The name is also changed to tg3_find_peer() from tg3_find_5704_peer(). It is also necessary to call netdev_priv() to get to the peer's private tg3 structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[SPARC]: Fix RTC build failure.Adrian Bunk
On sparc and sparc64, the rtc driver doesn't compile with PCI support disabled. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[SCTP]: Fix sctp to not return erroneous POLLOUT events.Neil Horman
Make sctp_writeable() use sk_wmem_alloc rather than sk_wmem_queued to determine the sndbuf space available. It also removes all the modifications to sk_wmem_queued as it is not currently used in SCTP. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[IPSEC]: Perform SA switchover immediately.David S. Miller
When we insert a new xfrm_state which potentially subsumes an existing one, make sure all cached bundles are flushed so that the new SA is used immediately. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[ARM] 3210/1: add missing memory barrier helper for NPTL supportNicolas Pitre
Patch from Nicolas Pitre Strictly speaking, the NPTL kernel helpers are required for pre ARMv6 only. They are available on ARMv6+ as well for obvious compatibility reasons. However there are cases where extra memory barriers are needed when using an SMP ARMv6 machine but not on pre-ARMv6. This patch adds a memory barrier kernel helper that glibc can use as needed for pre-ARMv6 binaries to be forward compatible with an SMP kernel on ARMv6, as well as the necessary dmb instructions to the cmpxchg helper. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-19[XFRM]: Handle DCCP in xfrm{4,6}_decode_sessionPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[IPV6]: Fix route lifetime.YOSHIFUJI Hideaki
The route expiration time is stored in rt6i_expires in jiffies. The argument of rt6_route_add() for adding a route is not the expiration time in jiffies nor in clock_t, but the lifetime (or time left before expiration) in clock_t. Because of the confusion, we sometimes saw several strange errors (FAILs) in TAHI IPv6 Ready Logo Phase-2 Self Test. The symptoms were analyzed by Mitsuru Chinen <CHINEN@jp.ibm.com>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[BRIDGE-NF]: Fix bridge-nf ipv6 length checkBart De Schuymer
A typo caused some bridged IPv6 packets to get dropped randomly, as reported by Sebastien Chaumontet. The patch below fixes this (using skb->nh.raw instead of raw) and also makes the jumbo packet length checking up-to-date with the code in net/ipv6/exthdrs.c::ipv6_hop_jumbo. Signed-off-by: Bart De Schuymer <bdschuym@pandora.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[RTNETLINK]: Fix RTNLGRP definitions in rtnetlink.hKristian Slavov
I reported a problem and gave hints to the solution, but nobody seemed to react. So I prepared a patch against 2.6.14.4. Tested on 2.6.14.4 with "ip monitor addr" and with the program attached, while adding and removing IPv6 address. Both programs didn't receive any messages. Tested 2.6.14.4 + this patch, and both programs received add and remove messages. Signed-off-by: Kristian Slavov <kristian.slavov@nomadiclab.com> Acked-by: Jamal Hadi salim <hadi@cyberus.ca> ACKed-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[NETFILTER]: Fix incorrect dependency for IP6_NF_TARGET_NFQUEUEPatrick McHardy
IP6_NF_TARGET_NFQUEUE depends on IP6_NF_IPTABLES, not IP_NF_IPTABLES. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[NETFILTER]: Fix NAT init orderPatrick McHardy
As noticed by Phil Oester, the GRE NAT protocol helper is initialized before the NAT core, which makes registration fail. Change the linking order to make NAT be initialized first. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[PATCH] V4L/DVB SCM Maintainers UpdateMauro Carvalho Chehab
- This patch updates MAINTAINERS file by replacing quilt to git SCM Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-19[PATCH] V4L/DVB (3189): Fix a broken logic that didn't cover all standards.Mauro Carvalho Chehab
- Fix a broken logic that didn't cover all standards. - Fix compilation failure with gcc 2.95.3. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-19[PATCH] V4L/DVB (3181): Enable SPDIF output for DVB-S rev 2.3Oliver Endriss
- Enable SPDIF output for DVB-S rev 2.3. Firmware 2623 or higher required. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>