aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-17Btrfs: Show discard option in /proc/mountsMatthew Wilcox
Christoph's patch e244a0aeb6a599c19a7c802cda6e2d67c847b154 doesn't display the discard option in /proc/mounts, leading to some confusion for me. Here's the missing bit. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: deny sys_link across subvolumes.TARUISI Hiroaki
I rebased Christian Parpart's patch to deny hard link across subvolumes. Original patch modifies also btrfs_rename, but I excluded it because we can move across subvolumes now and it make no problem. ----------------- Hard link across subvolumes should not allowed in Btrfs. btrfs_link checks root of 'to' directory is same as root of 'from' file. If not same, btrfs_link returns -EPERM. Signed-off-by: TARUISI Hiroaki <taruishi.hiroak@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: fail mount on bad mount optionsSage Weil
We shouldn't silently ignore unrecognized options. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: don't add extent 0 to the free space cache v2Yan, Zheng
If block group 0 is completely free, btrfs_read_block_groups will add extent [0, BTRFS_SUPER_INFO_OFFSET) to the free space cache. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Fix per root used space accountingYan, Zheng
The bytes_used field in root item was originally planned to trace the amount of used data and tree blocks. But it never worked right since we can't trace freeing of data accurately. This patch changes it to only trace the amount of tree blocks. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Fix btrfs_drop_extent_cache for skip pinned caseYan, Zheng
The check for skip pinned case is wrong, it may breaks the while loop too soon. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Add delayed iputYan, Zheng
iput() can trigger new transactions if we are dropping the final reference, so calling it in btrfs_commit_transaction may end up deadlock. This patch adds delayed iput to avoid the issue. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Pass transaction handle to security and ACL initialization functionsYan, Zheng
Pass transaction handle down to security and ACL initialization functions, so we can avoid starting nested transactions Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Make truncate(2) more ENOSPC friendlyYan, Zheng
truncating and deleting regular files are unbound operations, so it's not good to do them in a single transaction. This patch makes btrfs_truncate and btrfs_delete_inode start a new transaction after all items in a tree leaf are deleted. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Make fallocate(2) more ENOSPC friendlyYan, Zheng
fallocate(2) may allocate large number of file extents, so it's not good to do it in a single transaction. This patch make fallocate(2) start a new transaction for each file extents it allocates. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Avoid orphan inodes cleanup during committing transactionYan, Zheng
btrfs_lookup_dentry may trigger orphan cleanup, so it's not good to call it while committing a transaction. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Avoid orphan inodes cleanup while replaying logYan, Zheng
We do log replay in a single transaction, so it's not good to do unbound operations. This patch cleans up orphan inodes cleanup after replaying the log. It also avoids doing other unbound operations such as truncating a file during replaying log. These unbound operations are postponed to the orphan inode cleanup stage. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Btrfs: Fix disk_i_size update corner caseYan, Zheng
There are some cases file extents are inserted without involving ordered struct. In these cases, we update disk_i_size directly, without checking pending ordered extent and DELALLOC bit. This patch extends btrfs_ordered_update_i_size() to handle these cases. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: kill I_LOCK fold do_sync_file_range into sys_sync_file_range fix up O_SYNC comments VFS/fsstack: handle 32-bit smp + preempt + large files in fsstack_copy_inode_size fsstack/ecryptfs: remove unused get_nlinks param to fsstack_copy_attr_all vfs: remove extraneous NULL d_inode check from do_filp_open fs: no games with DCACHE_UNHASHED fs: anon_inodes implement dname dio: fix use-after-free
2009-12-17Merge branch 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-scoreLinus Torvalds
* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score: score: include asm-generic/param.h in asm/delay.h. score: fixed pfn_valid define. score: add flush_dcahce_page and PG_dcache_dirty define
2009-12-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (27 commits) regulator: wm831x_reg_read() failure unnoticed in wm831x_aldo_get_mode() twl-regulator: Fix reg_disable functionality for 4030 and 6030 twl-regulator: Add turnon delay to reg_enable twl-regulator: Restore REMAP configuration in regulator probe twl-regulator: Add turnon-delay and REMAP config to twlreg_info struct twl-regulator: Define critical regulators as always_on twl-regulator: Add all twl4030 regulators to twlreg_info regulator: mc13783-regulator: correct the probing time. regulator: Fix unbalanced disables/enables in regulator_bulk_{enable,disable} error path regulator: core.c: Small coding style cleanup (indentation fixup) drivers/regulator: use PTR_ERR to get error code regulator: consumer.h - fix build when consumer.h is #included first. regulator/mc13783: various cleanups regulator/mc13783: rename source file to match other drivers Fix some AB3100 regulator issues regulator: keep index within bounds in da9034_get_ldo12_voltage() regulator: Ensure val is initialised in 88pm8607 choose_voltage() regulator: Remove duplicate consts from ab3100 regulator: Handle regulators without suspend mode configuration regulator: Factor out regulator name pretty printing ...
2009-12-17kill I_LOCKChristoph Hellwig
After I_SYNC was split from I_LOCK the leftover is always used together with I_NEW and thus superflous. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17fold do_sync_file_range into sys_sync_file_rangeChristoph Hellwig
We recently go rid of all callers of do_sync_file_range as they're better served with vfs_fsync or the filemap_write_and_wait. Now that do_sync_file_range is down to a single caller fold it into it so that people don't start using it again accidentally. While at it also switch it from using __filemap_fdatawrite_range(..., WB_SYNC_ALL) to the more clear filemap_fdatawrite_range(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17fix up O_SYNC commentsChristoph Hellwig
Proper Posix O_SYNC handling only made it into 2.6.33, not 2.6.32. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17spi: spi_txx9.c: use resource_size()hartleys
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: spi_sh_sci.c: use resource_size()hartleys
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: spi_mpc8xxx.c: use resource_size()hartleys
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: spi_bfin5xx.c: use resource_size()hartleys
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi: atmel_spi.c: use resource_size()hartleys
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17VFS/fsstack: handle 32-bit smp + preempt + large files in ↵Erez Zadok
fsstack_copy_inode_size Copy the inode size and blocks from one inode to another correctly on 32-bit systems with CONFIG_SMP, CONFIG_PREEMPT, or CONFIG_LBDAF. Use proper inode spinlocks only when i_size/i_blocks cannot fit in one 32-bit word. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17spi: Add s3c64xx SPI Controller driverJassi Brar
Each SPI controller has exactly one CS line and as such doesn't provide for multi-cs. We implement a workaround to support multi-cs by _not_ configuring the mux'ed CS pin for each SPI controller. The CS mechanism is assumed to be fully machine specific - the driver doesn't even assume some GPIO pin is used to control the CS. The driver selects between DMA and POLLING mode depending upon the xfer size - DMA mode for xfers bigger than FIFO size, POLLING mode otherwise. The driver has been designed to be capable of running SoCs since s3c64xx and till date, for that reason some of the register fields have been passed via, SoC specific, platform data. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17fsstack/ecryptfs: remove unused get_nlinks param to fsstack_copy_attr_allErez Zadok
This get_nlinks parameter was never used by the only mainline user, ecryptfs; and it has never been used by unionfs or wrapfs either. Acked-by: Dustin Kirkland <kirkland@canonical.com> Acked-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17atmel_spi: fix dma addr calculation for len > BUFFER_SIZEBen Nizette
If len > BUFFER_LEN and !xfer->rx_buf we end up calculating the tx buffer address as *tx_dma = xfer->tx_dma + xfer->len - BUFFER_SIZE; which is constant; i.e. we just send the last BUFFER_SIZE data over again until we've reached the right number of bytes. This patch gets around this by using the /requested/ length when calculating addresses. Note there's no way len != *plen when we calculate the rx buffer address but conceptually we should be using *plen and I don't want someone to come through later, see the calculations for rx and tx are different and "clean up" back to what we had. Signed-off-by: Ben Nizette <bn@niasdigital.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spi_s3c24xx: add FIQ pseudo-DMA supportBen Dooks
Add pseudo-DMA by FIQ to the S3C24XX SPI driver. This allows the driver to get DMA-like performance where there are either no free DMA channels or when doing transfers that required both TX and RX data paths. Since this patch requires the addition of an assembly file to hold the FIQ code, we rename the module (instead of adding a rename of the .c file to this patch). We expect most users are loading this via udev and thus there should be no change to the userland configuration. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17vfs: remove extraneous NULL d_inode check from do_filp_openJeff Layton
We can't get to this point unless it's a valid pointer. Signed-off-by: Jeff Layton <jlayton@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17fs: no games with DCACHE_UNHASHEDNick Piggin
Filesystems outside the regular namespace do not have to clear DCACHE_UNHASHED in order to have a working /proc/$pid/fd/XXX. Nothing in proc prevents the fd link from being used if its dentry is not in the hash. Also, it does not get put into the dcache hash if DCACHE_UNHASHED is clear; that depends on the filesystem calling d_add or d_rehash. So delete the misleading comments and needless code. Acked-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17fs: anon_inodes implement dnameNick Piggin
Add a d_dname method for anon_inodes filesystem, the same way pipefs and sockfs pseudo filesystems. This allows us to remove the DCACHE_UNHASHED hack from anon_inodes.c (see next patch). [AV: inumber is useless here, dropped from anon_inodefs_dname()] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Miklos Szeredi <mszeredi@suse.cz> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17spi: controller driver for Designware SPI coreFeng Tang
Driver for the Designware SPI core, it supports multipul interfaces like PCI/APB etc. User can use "dw_apb_ssi_db.pdf" from Synopsys as HW datasheet. [randy.dunlap@oracle.com: fix build] [akpm@linux-foundation.org: build fix] Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spidev: add proper section markersMike Frysinger
The driver already uses __devexit_p() in the structure, but looks like actual __dev{init,exit} markings were forgotten. The spidev_spi driver also needs renaming to include a "_driver" suffix to avoid section mismatch warnings. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17spidev: use DECLARE_BITMAP instead of declaring the arrayThadeu Lima de Souza Cascardo
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-17Merge branch 'for-33' of git://repo.or.cz/linux-kbuildLinus Torvalds
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits) net: fix for utsrelease.h moving to generated gen_init_cpio: fixed fwrite warning kbuild: fix make clean after mismerge kbuild: generate modules.builtin genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}() score: add asm/asm-offsets.h wrapper unifdef: update to upstream revision 1.190 kbuild: specify absolute paths for cscope kbuild: create include/generated in silentoldconfig scripts/package: deb-pkg: use fakeroot if available scripts/package: add KBUILD_PKG_ROOTCMD variable scripts/package: tar-pkg: use tar --owner=root Kbuild: clean up marker net: add net_tstamp.h to headers_install kbuild: move utsrelease.h to include/generated kbuild: move autoconf.h to include/generated drop explicit include of autoconf.h kbuild: move compile.h to include/generated kbuild: drop include/asm kbuild: do not check for include/asm-$ARCH ... Fixed non-conflicting clean merge of modpost.c as per comments from Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h that needed to be changed to generated/autoconf.h)
2009-12-17Revert "fbdev: atafb - add palette register check"Geert Uytterhoeven
This reverts commit 8546e3ce6e37c359979b69862442f94e0ef0e03b, as it's a partial duplicate of commit 2f390380ca69e1617cdddb12d8da94f0a9f4319d ("fbdev: add palette register check to several drivers"). The former went in first through the m68k tree, the latter through Andrew Morton. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17x86/ptrace: make genregs[32]_get/set more robustLinus Torvalds
The loop condition is fragile: we compare an unsigned value to zero, and then decrement it by something larger than one in the loop. All the callers should be passing in appropriately aligned buffer lengths, but it's better to just not rely on it, and have some appropriate defensive loop limits. Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-17backlight: mbp_nvidia_bl - add two more MacBookPro variantsDaniel Ritz
This adds the MacBookPro 5,3 and 5,4 to the DMI tables. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17backlight: Pass device through notify callback in the pwm driverBen Dooks
Add the device to the notify callback's arguments in the PWM backlight driver. This brings the notify callback into line with the other callbacks defined by this driver. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: leds-pwm: Set led_classdev max_brightnessLars-Peter Clausen
Currently the driver leds-pwm doesn't set max_brightness for the led device although it's platform data proides a maximum brightness. Instead it stores its own private driver struct. The max_brightness defaults to 255 for led device if it has not been set. As a result any leds-pwm device with a different maximum brightness will show incorrect behavior, as it is posible to either set a longer then period duty time or not be able to switch the led to full brightness. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: leds-lp3944.h - remove unneeded includesAntonio Ospite
These were needed in the first version of the driver because we used to expose workqueue and led class details in the header file, now we don't. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: use default-on trigger for Cobalt QubeFlorian Fainelli
This patch changes the default trigger from "ide-disk" to "default-on". Users updating from kernels not having this LED driver will prefer having the same LED behavior as they used to. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: drivers/leds/leds-ss4200.c: fix return statementakpm@linux-foundation.org
drivers/leds/leds-ss4200.c: In function 'ich7_lpc_probe': drivers/leds/leds-ss4200.c:353: warning: 'return' with no value, in function returning non-void Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: leds-pca9532.h- indent with tabs, not spacesAntonio Ospite
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: Add LED class driver for regulator driven LEDs.Antonio Ospite
This driver provides an interface for controlling LEDs (or vibrators) connected to PMICs for which there is a regulator framework driver. This driver can be used, for instance, to control vibrator on all Motorola EZX phones using the pcap-regulator driver services. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17backlight: PTR_ERR return of wrong pointer in cr_backlight_probe()Roel Kluin
Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: leds-cobalt-qube.c: use resource_size()H Hartley Sweeten
Use resource_size() for ioremap. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17leds: leds-cobalt-raq.c - use resource_size()H Hartley Sweeten
Use resource_size() for ioremap. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17score: include asm-generic/param.h in asm/delay.h.Chen Liqin
Signed-off-by: Cui Bixiong <bixiong@sunnorth.com.cn> Signed-off-by: Chen Liqin <liqin.chen@sunplusct.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 09:57:32 +0000