aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-12r8169: fix missing loop variable incrementFrancois Romieu
Spotted-by: Citizen Lee <citizen_lee@thecus.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12ip1000: menu location changeStephen Hemminger
Move the ip1000 driver into the expected place for gigabit cards in the configuration menu structure. It should be under the gigabit cards, not at the top level. Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12Fixed a small typo in the loopback driverEmil Medve
This is probably a result of the changes from commit 854d836 - [NET]: Dynamically allocate the loopback device, part 2 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-123c509: PnP resource management fixKrzysztof Helt
In order to release PnP resources a card type must be set to EL3_PNP. Previously, it was never set hence the PnP resources were not released and device was left in incorrect state. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: fix byte-swapping in tx and rxDhananjay Phadke
Here's the reworked patch. This cleans up some unnecessary byte-swapping while setting up tx and interpreting rx desc. The 64 bit rx status data should be converted to host endian format only once and the macros just need to extract bitfields. This saves a spate of interrupts on pseries blades caused by buggy (non) processing rx status ring. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: optimize tx handlingdhananjay@netxen.com
netxen driver allows limited number of threads simultaneously posting skb's in tx ring. If transmit slot is unavailable, driver calls schedule() or loops in xmit_frame(). This patch returns TX_BUSY and lets the stack reschedule the packet if transmit slot is unavailable. Also removes unnecessary check for tx timeout in the driver itself, the network stack does that anyway. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: stop second phy correctlydhananjay@netxen.com
This patch fixes bug that doesn't quiesce second port when interface is brought down, which could lead to unwarranted interrupt during rmmod / ifdown. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: update driver versiondhananjay@netxen.com
Bumping up driver version to 3.4.18, several fixes have gone in since version 3.4.2. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: update MAINTAINERSdhananjay@netxen.com
Changing MAINTAINERS for netxen nic driver. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12endianness noise in tulip_coreAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12de4x5 fixesAl Viro
* (trivial) endianness annotations * don't bother with del_timer() from the inside of timer handler itself * disable_ast() really ought to do del_timer_sync(), not del_timer() * clean the timer handling in general. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12xircom_cb endianness fixesAl Viro
* descriptors inside the rx and tx rings are l-e * don't cpu_to_le32() the argument of outl() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-11Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix unaligned access in readdir
2008-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24: sh: Force __access_ok() to obey address space limit. sh: Fix argument page dcache flushing regression.
2008-01-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Replace 40c7869b693b18412491fdcff64682215b739f9e kludge [MIPS] Lasat: Fix built in separate object directory. [MIPS] Malta: Fix software reset on big endian [MIPS] pnx8xxx: move to clocksource [MIPS] Wrong CONFIG option prevents setup of DMA zone.
2008-01-11ps3fb: fix deadlock on kexec()Jeremy Kerr
Since the introduction of the acquire_console_sem calls in 0333d83509c7d8496c8965b5ba9bc0c98e83c259, kexecing can cause the kernel to deadlock: ps3fb_shutdown() -> unregister_framebuffer() -> fb_notifier_call_chain(FB_EVENT_FB_UNBIND) -> fbcon_fb_unbind() -> unbind_con_driver() -> bind_con_driver() [ acquires console_sem ] -> fbcon_deinit() -> fbops->fb_release(newinfo, 0) -> ps3fb_release() -> ps3fb_sync() [ acquires console_sem ] This change avoids the deadlock by moving the acquire_console_sem() out of ps3fb_sync(), and puts it into the two other callsites, leaving ps3fb_release() to call ps3fb_sync() without the console semaphore. [Geert] - Corrected call sequence above - ps3fb_release() may be called with and without console_sem held. This is an inconsistency that should be fixed at the fb level, but for now, try to acquire console_sem in ps3fb_release(). I think it's safer to let ps3fb_release() try to acquire console_sem and not refresh the screen if it fails, than to call ps3fb_sync() without holding console_sem, as ps3fb_par may be modified at the same time, causing crashes or lockups. Besides, ps3fb_release() only calls ps3fb_sync() to refresh the screen when display flipping is disabled, which is an uncommon case (except during shutdown/kexec). Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11ps3fb: prevent use after free of fb_infoJeremy Kerr
In ps3fb_shutdown, freeing the framebuffer will cause fb_info (in dev->core.driver_data) to be free()ed, which we potentially access from the ps3fbd kthread. This change frees the framebuffer after stopping the ps3fbd kthread. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: blktrace: kill the unneeded initcall block: fix blktrace timestamps loop: fix bad bio_alloc() nr_iovec request Don't blatt first element of prv in sg_chain()
2008-01-11cache invalidation error for buffered writeMassimo Cirillo
The bug causes corruptions of data read from flash. The original code performs cache invalidation from "adr" to "adr + len" in do_write_buffer(). Since len and adr could be updated in the code before invalidation - it causes improper setting of cache invalidation regions. Signed-off-by: Massimo Cirillo <maxcir@gmail.com> Signed-off-by: Giuseppe D'Eliseo <giuseppedeliseo@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woohouse <dwmw2@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11IDE: terminate ACPI DMI listJeff Garzik
Fix oops reported by Trond. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11[MIPS] Replace 40c7869b693b18412491fdcff64682215b739f9e kludgeAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-11[MIPS] Lasat: Fix built in separate object directory.WANG Cong
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> [Ralf: The LDSCRIPT script needed fixing, too] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-11[MIPS] Malta: Fix software reset on big endianDmitri Vorobiev
I noticed that the commit f197465384bf7ef1af184c2ed1a4e268911a91e3 (MIPS Tech: Get rid of volatile in core code) broke the software reset functionality for MIPS Malta boards in big-endian mode. According to the MIPS Malta board user's manual, writing the magic 32-bit GORESET value into the SOFTRES register initiates board soft reset. My experimentation has shown that the endianness of the GORESET integer should thereby be the same as the endianness, which has been set for the CPU itself. The writew() function used to write the magic value in the code introduced by the commit mentioned above, however, swaps bytes for big-endian kernels and transfers 16 bits instead of 32. The patch below replaces the writew() function by the __raw_writel() routine, which leaves the byte order intact and transfers the whole MIPS machine word. Trivial code cleanup (replacing spaces by a tab and cutting oversized lines to make checkpatch.pl happy) is also included. The patch was tested using a Malta evaluation board running in both BE and LE modes. For both modes, software reset was fully functional after the change. P.S. I suspect that the same commit broke the "standby" functionality for MIPS Atlas boards. However, I did not touch the Atlas code as I don't have such board at my disposal and also because the linux-mips.org Web site claims that Atlas support is scheduled for removal. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-11[MIPS] pnx8xxx: move to clocksourceVitaly Wool
This patch converts PNX8XXX system timer to clocksource restoring PNX8550 support back to live. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-11[MIPS] Wrong CONFIG option prevents setup of DMA zone.Thomas Bogendoerfer
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-11blktrace: kill the unneeded initcallJens Axboe
It just inits the mutex, we can do that with DEFINE_MUTEX() instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11block: fix blktrace timestampsIngo Molnar
David Dillow reported broken blktrace timestamps. The reason is cpu_clock() which is not a global time source. Fix bkltrace timestamps by using ktime_get() like the networking code does for packet timestamps. This also removes a whole lot of complexity from bkltrace.c and shrinks the code by 500 bytes: text data bss dec hex filename 2888 124 44 3056 bf0 blktrace.o.before 2390 116 44 2550 9f6 blktrace.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11loop: fix bad bio_alloc() nr_iovec requestJens Axboe
Don't allocate room for an iovec when it is not needed. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11Don't blatt first element of prv in sg_chain()Rusty Russell
I realize that sg chaining is a ploy to make the rest of the kernel devs feel the pain of the SCSI subsystem. But this was a little unsubtle. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-11[XFS] fix unaligned access in readdirChristoph Hellwig
This patch should fix the issue seen on Alpha with unaligned accesses in the new readdir code. By aligning each dirent to sizeof(u64) we'll avoid unaligned accesses. To make doubly sure we're not hitting problems also rearrange struct hack_dirent to avoid holes. SGI-PV: 975411 SGI-Modid: xfs-linux-melb:xfs-kern:30302a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-01-11sh: Force __access_ok() to obey address space limit.Paul Mundt
When the thread_info->addr_limit changes were introduced, __access_ok() was missed in the conversion, allowing user processes to perform P1/P2 accesses under certain conditions. This has already been corrected with the nommu refactoring in later kernels. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix alignment fault in aes_crypt_copy
2008-01-10Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata and starting/stopping ATAPI floppy devices sata_sil24: prevent hba lockup when pass-through ATA commands are used Update kernel parameter document for libata DMA mode setting knobs. libata: don't normalize UNKNOWN to NONE after reset libata-pmp: propagate timeout to host link libata-pmp: 4726 hates SRST pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion pata_pdc202xx_old: Further fixups libata-sff: PCI IRQ handling fix sata_qstor: use hardreset instead of softreset
2008-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: trm290: do hook dma_host_{on,off} methods (take 2) ide: fix cable detection for SATA bridges ide: workaround suspend bug for ACPI IDE
2008-01-10libata and starting/stopping ATAPI floppy devicesOndrej Zary
Prevent libata from starting/stopping non-ATA devices (like ATAPI floppy drives) as they don't seem to like it: sd 1:0:1:0: [sdb] Starting disk ata2.01: configured for PIO2 sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:1:0: [sdb] Sense Key : 0x2 [current] sd 1:0:1:0: [sdb] ASC=0x3a ASCQ=0x0 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-10trm290: do hook dma_host_{on,off} methods (take 2)Sergei Shtylyov
Using default methods caused the chip's DMA PRD count registers, inadvertently starting DMA! While fixing it, also do: - get rid of the 'ide_' prefixes in several functions for which the prefix in the method's name has been 'ide_' ectomized already; - align the code hooking the IDE DMA methods in init_hwif_trm290()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-10ide: fix cable detection for SATA bridgesGeorge Kibardin
Signed-off-by: George Kibardin <george-kibardin@yandex.ru> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-10ide: workaround suspend bug for ACPI IDEShaohua Li
http://bugzilla.kernel.org/show_bug.cgi?id=9673 ACPI _PS3 cause S4 breaks in the second attempt. The system has a _PS3 method for IDE, which will call into SMM mode. Currently we haven't clue why just the second attempt fails, as it's totally in BIOS code, so blacklist the system so far for 2.6.24. A possible suspect is ACPI NVS isn't save/restore, we will revisit the bug after linux does ACPI NVS save/restore. Bart: - fix scripts/checkpatch.pl complaints - const-ify ide_acpi_dmi_table[] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Reported-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-10sata_sil24: prevent hba lockup when pass-through ATA commands are usedGwendal Grignou
Fix commands timeout with Sil3124/3132 based HBA when pass-through ATA commands [where ATA_QCFLAG_RESULT_TF is set] are used while other commands are active on other devices connected to the same port with a Port Multiplier. Due to a hardware bug, these commands must be sent alone, like ATAPI commands. Signed-off-by: Gwendal Grignou <gwendal@google.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10Update kernel parameter document for libata DMA mode setting knobs.FD Cami
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata: don't normalize UNKNOWN to NONE after resetTejun Heo
After non-classifying reset, ehc->classes[] could contain ATA_DEV_UNKNOWN which used to be normalized to ATA_DEV_NONE for consistency. However, this causes unfortunate side effect for drivers which have non-classifying hardresets (e.g. sata_nv) by making hardreset report ATA_DEV_NONE for non-classifying resets and thus makes EH believe that the port is unoccupied and recovery can be skipped. The end result is that after a device is swapped with another one, the new device isn't attached after the old one is detached. This patch makes ata_eh_reset() not normalize UNKNOWN to NONE after non-classifying resets. This fixes the above problem. As UNKNOWN and NONE are handled differently by only EH hotplug logic, this doesn't cause other behavior changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata-pmp: propagate timeout to host linkTejun Heo
Timeout on downstream command may indicate transmission problem on host link. Propagate timeouts to host link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata-pmp: 4726 hates SRSTTejun Heo
4726 hates SRST even on non-config ports. Don't use it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversionRod Whitby
Fixes a compilation error caused by ata_port_desc() conversion (cbcdd87593a1d85c5c4b259945a3a09eee12814d). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10pata_pdc202xx_old: Further fixupsAlan Cox
Turns out distros always enabled burst mode and it is pretty essential so do the same. Also sort out the post DMA mode restore properly. My 20263 card now seems happy but needs some four drive tests done yet (when I've persuaded the kernel not to hang in the edd boot code if I plug them in ..) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10libata-sff: PCI IRQ handling fixAlan Cox
It is legitimate (although annoying and silly) for a PCI IDE controller not to be assigned an interrupt and to be polled. The libata-sff code should therefore not try and request IRQ 0 in this case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10sata_qstor: use hardreset instead of softresetTejun Heo
During conversion to new EH, sata_qstor was accidentaly changed to use softreset, which is buggy on this chip, instead of hardreset. This patch updates sata_qstor such that it uses hardreset again. This fixes bugzilla bug 9631. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10NFSv4: Give the lock stateid its own sequence queueTrond Myklebust
Sharing the open sequence queue causes a deadlock when we try to take both a lock sequence id and and open sequence id. This fixes the regression reported by Dimitri Puzin and Jeff Garzik: See http://bugzilla.kernel.org/show_bug.cgi?id=9712 for details. Reported-and-tested-by: Dimitri Puzin <bugs@psycast.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11[CRYPTO] padlock: Fix alignment fault in aes_crypt_copyHerbert Xu
The previous patch fixed spurious read faults from occuring by copying the data if we happen to have a single block at the end of a page. It appears that gcc cannot guarantee 16-byte alignment in the kernel with __attribute__. The following report from Torben Viets shows a buffer that's only 8-byte aligned: > eneral protection fault: 0000 [#1] > Modules linked in: xt_TCPMSS xt_tcpmss iptable_mangle ipt_MASQUERADE > xt_tcpudp xt_mark xt_state iptable_nat nf_nat nf_conntrack_ipv4 > iptable_filter ip_tables x_tables pppoe pppox af_packet ppp_generic slhc > aes_i586 > CPU: 0 > EIP: 0060:[<c035b828>] Not tainted VLI > EFLAGS: 00010292 (2.6.23.12 #7) > EIP is at aes_crypt_copy+0x28/0x40 > eax: f7639ff0 ebx: f6c24050 ecx: 00000001 edx: f6c24030 > esi: f7e89dc8 edi: f7639ff0 ebp: 00010000 esp: f7e89dc8 Since the hardware must have 16-byte alignment, the following patch fixes this by open coding the alignment adjustment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-09[SCSI] qla1280: fix 32 bit segment codeFUJITA Tomonori
There's an error remaining in the 32 bit descriptor code after the conversion to dma accessors: req_cnt is left uninitialised. qla1280_32bit_start_scsi gives the following warnings: drivers/scsi/qla1280.c: In function 'qla1280_32bit_start_scsi': drivers/scsi/qla1280.c:3044: warning: unused variable 'dma_handle' drivers/scsi/qla1280.c: In function 'qla1280_queuecommand': drivers/scsi/qla1280.c:3060: warning: 'req_cnt' is used uninitialized in this function drivers/scsi/qla1280.c:3042: note: 'req_cnt' was declared here Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 23:26:33 +0000