aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-05-04[SCTP]: Fix the SO_REUSEADDR handling to be similar to TCP.Vlad Yasevich
Update the SO_REUSEADDR handling to also check for listen state. This was muliple listening server sockets can't be created and they will not steal packets from each other. Reported by Paolo Galtieri <pgaltieri@mvista.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-04[SCTP]: Verify all destination ports in sctp_connectx.Vlad Yasevich
We need to make sure that all destination ports are the same, since the association really must not connect to multiple different ports at once. This was reported on the sctp-impl list. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-04[XFRM] SPD info TLV aggregationJamal Hadi Salim
Aggregate the SPD info TLVs. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-04[XFRM] SAD info TLV aggregationxJamal Hadi Salim
Aggregate the SAD info TLVs. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-04[AF_RXRPC]: Sort out MTU handling.David Howells
Sort out the MTU determination and handling in AF_RXRPC: (1) If it's present, parse the additional information supplied by the peer at the end of the ACK packet (struct ackinfo) to determine the MTU sizes that peer is willing to support. (2) Initialise the MTU size to that peer from the kernel's routing records. (3) Send ACKs rather than ACKALLs as the former carry the additional info, and the latter do not. (4) Declare the interface MTU size in outgoing ACKs as a maximum amount of data that can be stuffed into an RxRPC packet without it having to be fragmented to come in this computer's NIC. (5) If sendmsg() is given MSG_MORE then it should allocate an skb of the maximum size rather than one just big enough for the data it's got left to process on the theory that there is more data to come that it can append to that packet. This means, for example, that if AFS does a large StoreData op, all the packets barring the last will be filled to the maximum unfragmented size. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-04[AF_IUCV/IUCV] : Add missing section annotationsHeiko Carstens
Add missing section annotations and found and fixed some Coding Style issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
2007-05-04[AF_IUCV]: Implementation of a skb backlog queueJennifer Hunt
With the inital implementation we missed to implement a skb backlog queue . The result is that socket receive processing tossed packets. Since AF_IUCV connections are working synchronously it leads to connection hangs. Problems with read, close and select also occured. Using a skb backlog queue is fixing all of these problems . Signed-off-by: Jennifer Hunt <jenhunt@us.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-04[NETLINK]: Remove bogus BUG_ONPatrick McHardy
Remove bogus BUG_ON(mutex_is_locked(nlk_sk(sk)->cb_mutex)), when the netlink_kernel_create caller specifies an external mutex it might validly be locked. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[IPV6]: Some cleanups in include/net/ipv6.hEric Dumazet
1) struct ip6_flowlabel : moves 'users' field to avoid two 32bits holes for 64bit arches. Shrinks by 8 bytes sizeof(struct ip6_flowlabel) 2) ipv6_addr_cmp() and ipv6_addr_copy() dont need (void *) casts : Compiler might take into account natural alignement of in6_addr structs to emit better code for memcpy()/memcmp() Casts to (void *) force byte accesses. 3) ipv6_addr_prefix() optimization : Better to clear whole struct, as compiler can emit better code for memset(addr, 0, 16) (2 stores on x86_64), and avoid some conditional branches. # size vmlinux.after vmlinux.before text data bss dec hex filename 5262262 647612 557432 6467306 62aeea vmlinux.after 5262550 647612 557432 6467594 62b00a vmlinux.before thats 288 bytes saved. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[TCP]: zero out rx_opt in tcp_disconnect()Srinivas Aji
When the server drops its connection, NFS client reconnects using the same socket after disconnecting. If the new connection's SYN,ACK doesn't contain the TCP timestamp option and the old connection's did, tp->tcp_header_len is recomputed assuming no timestamp header but tp->rx_opt.tstamp_ok remains set. Then tcp_build_and_update_options() adds in a timestamp option past the end of the allocated TCP header, overwriting TCP data, or when the data is in skb_shinfo(skb)->frags[], overwriting skb_shinfo(skb) causing a crash soon after. (The issue was debugged from such a crash.) Similarly, wscale_ok and sack_ok also get set based on the SYN,ACK packet but not reset on disconnect, since they are zeroed out at initialization. The patch zeroes out the entire tp->rx_opt struct in tcp_disconnect() to avoid this sort of problem. Signed-off-by: Srinivas Aji <Aji_Srinivas@emc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Fix TSO problem with small MSS.Michael Chan
Remove the check for skb->len greater than MTU when doing TSO. When the destination has a smaller MSS than the source, a TSO packet may be smaller than the MTU at the source and we still need to process it as a TSO packet. Thanks to Brian Ristuccia <bristuccia@starentnetworks.com> for reporting the problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NET]: Rework dev_base via list_head (v3)Pavel Emelianov
Cleanup of dev_base list use, with the aim to simplify making device list per-namespace. In almost every occasion, use of dev_base variable and dev->next pointer could be easily replaced by for_each_netdev loop. A few most complicated places were converted to using first_netdev()/next_netdev(). Signed-off-by: Pavel Emelianov <xemul@openvz.org> Acked-by: Kirill Korotaev <dev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[TCP] Highspeed: Limited slow-start is nowadays in tcp_slow_startIlpo Järvinen
Reuse limited slow-start (RFC3742) included into tcp_cong instead of having another implementation in High Speed TCP. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Update version and reldate.Michael Chan
Update version to 1.5.10. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Print bus information for PCIE devices.Michael Chan
Fix the code to print PCI or PCIE bus information for all devices. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add 1-shot MSI handler for 5709.Michael Chan
The 5709 supports the one-shot MSI handler similar to some of the tg3 chips. In this mode, the MSI disables itself automatically until it is re-enabled at the end of NAPI poll. Put the request_irq/free_irq logic in common procedures. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Restructure PHY event handling.Michael Chan
Restructure by adding bnx2_phy_event_is_set() to make code cleaner and easier to understand. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add indirect spinlock.Michael Chan
The indirect register access method will be used by more than one caller in BH context (NAPI poll and timer), so a spinlock is required. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add support for 5709 Serdes.Michael Chan
Add PCI ID and code to support the 5709 Serdes PHY. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Re-structure the 2.5G Serdes code.Michael Chan
Add some common procedures to handle enabling and disabling 2.5G. Add some missing code to resolve flow control. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Put MII register offsets in the bnx2 struct.Michael Chan
The 5709 Serdes device uses non-standard MII register offsets. This re-structuring will make it easier to support 5709 Serdes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add ipv6 TSO and checksum for 5709.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Update 5709 firmware.Michael Chan
Add ipv6 TSO support in firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Update 5708 firmware.Michael Chan
This fixes the problem of not counting all dropped multicast packets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Save PCI state during suspend.Michael Chan
This is needed to save the MSI state which will be lost during suspend. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Fix race conditions when calling register_netdev().Michael Chan
Hot-plug scripts can call bnx2_open() as soon as register_netdev() is called in bnx2_init_one(). We need to call pci_set_drvdata() and setup everything before calling register_netdev(). netif_carrier_off() also needs to be moved to bnx2_open() to avoid race conditions with the irq. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Add 40-bit DMA workaround for 5708.Michael Chan
The internal PCIE-to-PCIX bridge of the 5708 has the same 40-bit DMA limitation as some of the tg3 chips. Set dma_mask and persistent DMA mask to 40-bit to workaround. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Fix register and memory test on 5709.Michael Chan
Tweak registers and memory test range for 5709. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[BNX2]: Block MII access when ifdown.Michael Chan
The device may be in D3hot state and should not allow MII register access. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[ETHTOOL]: Add 2.5G bit definitions.Michael Chan
Add 2.5G supported and advertising bit definitions. 2.5G is supported by the bnx2 driver. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NETFILTER]: bridge netfilter: consolidate header pushing/pulling codePatrick McHardy
Consolidate the common push/pull sequences into a few helper functions. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NETFILTER]: sip: Fix RTP address NATHerbert Xu
I needed to use this recently to talk to a Cisco server. In my case I only did SNAT while the Cisco server used a different address for RTP traffic than the one for SIP. I discovered that nf_nat_sip NATed the RTP address to the SIP one which was unnecessary but OK. However, in doing so it did not DNAT the destination address on the RTP traffic to the Cisco back to the original RTP address. This patch corrects this by noting down the RTP address and using it when the expectation fires. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NETFILTER]: nf_nat_proto_gre: do not modify/corrupt GREv0 packets through NATJorge Boncompte
While porting some changes of the 2.6.21-rc7 pptp/proto_gre conntrack and nat modules to a 2.4.32 kernel I noticed that the gre_key function returns a wrong pointer to the GRE key of a version 0 packet thus corrupting the packet payload. The intended behaviour for GREv0 packets is to act like nf_conntrack_proto_generic/nf_nat_proto_unknown so I have ripped the offending functions (not used anymore) and modified the nf_nat_proto_gre modules to not touch version 0 (non PPTP) packets. Signed-off-by: Jorge Boncompte <jorge@dti2.net> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NETFILTER]: ipt_DNAT: accept port randomization optionPatrick McHardy
Also accept the --random option for DNAT to allow randomly selecting a destination port from the given range. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[TCP]: Use S+L catcher only with SACK for nowIlpo Järvinen
TCP has a transitional state when SACK is not in use during which this invariant is temporarily broken. Without SACK, tcp_clean_rtx_queue does not decrement sacked_out. Therefore calls to tcp_sync_left_out before sacked_out is again corrected by tcp_fastretrans_alert can trigger this trap as sacked_out still has couple of segments that are already out of window. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[AFS]: Adjust the new netdevice scanning codeDavid Howells
Adjust the new netdevice scanning code provided by Patrick McHardy: (1) Restore the function banner comments that were dropped. (2) Rather than using an array size of 6 in some places and an array size of ETH_ALEN in others, pass a pointer instead and pass the array size through so that we can actually check it. (3) Do the buffer fill count check before checking the for_primary_ifa condition again. This permits us to skip that check should maxbufs be reached before we run out of interfaces. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[AFS]: Replace rtnetlink client by direct dev_base walkingPatrick McHardy
Replace the large and complicated rtnetlink client by two simple functions for getting the MAC address for the first ethernet device and building a list of IPv4 addresses. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NET]: Add __dev_getfirstbyhwtypePatrick McHardy
Add __dev_getfirstbyhwtype for callers that don't want a reference but some data from the device and thus need to take the rtnl anyway. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[AFS]: Fix memory leak in SRXAFSCB_GetCapabilitiesPatrick McHardy
The interface array is not freed on exit. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NETLINK]: Fix use after free in netlink_recvmsgPatrick McHardy
When the user passes in MSG_TRUNC the skb is used after getting freed. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NETLINK]: Kill CB only when socket is unusedHerbert Xu
Since we can still receive packets until all references to the socket are gone, we don't need to kill the CB until that happens. This also aligns ourselves with the receive queue purging which happens at that point. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[NET] skbuff: fix kernel-docRandy Dunlap
Fix skbuff.h kernel-doc: linux-2.6.21-git4//include/linux/skbuff.h:316): No description found for parameter 'transport_header' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[TCP]: Delete unused header file net/ipv4/tcp_yeah.h.Robert P. J. Day
Delete the apparently unused header file net/ipv4/tcp_yeah.h. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[AFS]: Fix use of __exit functions from __init pathDavid Howells
Fix use of __exit functions from __init path. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[AFS/AF_RXRPC]: Miscellaneous fixes.David Howells
Make miscellaneous fixes to AFS and AF_RXRPC: (*) Make AF_RXRPC select KEYS rather than RXKAD or AFS_FS in Kconfig. (*) Don't use FS_BINARY_MOUNTDATA. (*) Remove a done 'TODO' item in a comemnt on afs_get_sb(). (*) Don't pass a void * as the page pointer argument of kmap_atomic() as this breaks on m68k. Patch from Geert Uytterhoeven <geert@linux-m68k.org>. (*) Use match_*() functions rather than doing my own parsing. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[AFS]: Make the match_*() functions take const options.David Howells
Make the match_*() functions take a const pointer to the options table and make strings pointers in the options table const too. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03[IPV6]: Get rid of __HAVE_ARCH_ADDR_SET.Eric Dumazet
__HAVE_ARCH_ADDR_SET seems unused these days, just get rid of it. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-30libata: honour host controllers that want just one hostLinus Torvalds
The Marvell IDE interface on my machine would hit a BUG_ON() in lib/iomem.c because it was calling ata_pci_init_one() specifying just a single port on the host, but that would actually end up trying to initialize two ports, the second one with bogus information. This fixes "ata_pci_init_one()" so that it actually passes down the n_ports variable that it got from the low-level driver to the host allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA layer actually having the correct port number information. And in order to make it all work, I also needed to fix a few places that had incorrectly hard-coded the fact that a host always had exactly two ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would just always iterate over both ports). Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-30pm: include EIO from errno-base.hDavid Rientjes
For backwards compatibility, call_platform_enable_wakeup() can return 0 instead of -EIO since we aren't guaranteed to have errno defined. Cc: David Brownell <david-b@pacbell.net> Signed-off-by: David Rientjes <rientjes@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-30Add kvasprintf()Jeremy Fitzhardinge
Add a kvasprintf() function to complement kasprintf(). No in-tree users yet, but I have some coming up. [akpm@linux-foundation.org: EXPORT it] Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Keir Fraser <keir@xensource.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>