aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-11MIPS: RB532: Fix id usage in platform devicesFlorian Fainelli
When there is only platform device of the same type, id = -1 should be used, fix this. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: replace raw volatile read with a readlFlorian Fainelli
This patch replaces a raw read using volatiles with a readl. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Remove gpio bootup stateFlorian Fainelli
We are no longer using gpio bootup state, so do not export it and do not parse the kernel command line tag for it. Instead we provide gpio-keys for the button the gpio bootup state was checking. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Use physical addresses for gpio and device controller registersFlorian Fainelli
This patch fixes the misuse of virtual addresses for the GPIO and third device controller which would lead to problems while accessing ioremap'd registers. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RB532: Cleanup and group definitions to their right placesFlorian Fainelli
This patch moves GPIO related definitions to gpio.h and IRQ related to irq.h Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Declare smsc_fdc37m81x_config_get() in smsc_fdc37m81x.hAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add __init tag for tx4938_pcic1_map_irq.Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add board_be_init for TX4927/TX4938Atsushi Nemoto
Setup default board_be_handler for TX4927/TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Default machine_restart using watchdog resetAtsushi Nemoto
Add default machine_restart routine using watchdog reset of TX4927 and TX4938. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Make spi_eeprom.c more genericAtsushi Nemoto
Helper routines in txx9/rbtx4938/spi_eeprom.c is not TX4938 specific. Move it to txx9/generic/ directory and make it works with SPI bus number other than 0. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/txx9/generic/spi_eeprom.c delete mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c
2008-10-11MIPS: RBTX4938: Add TOSHIBA_RBTX4938_MPLEX_KEEPAtsushi Nemoto
Add TOSHIBA_RBTX4938_MPLEX_KEEP to keep MPLEX settings by firmware. Also replace some printk with pr_info. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Raise priority of interrupts for errors, timers, SIOAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Add mtd supportAtsushi Nemoto
Add helper routines to register physmap-flash platform devices for NOR flashes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Runtime configuration of timeout-errorAtsushi Nemoto
Add kernel options to control bus timeout error. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Cache fixupAtsushi Nemoto
TX39/TX49 can enable/disable I/D cache at runtime. Add kernel options to control them. This is useful to debug some cache-related issues, such as aliasing or I/D coherency. Also enable CWF bit for TX49 SoCs. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Early command-line preprocessingAtsushi Nemoto
* Select board by command-line option or firmware environment variable. * Handle "masterclk=" option. * Add boards.h to centerize board_vec declaration. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 include/asm-mips/txx9/boards.h
2008-10-11MIPS: TXx9: Add prom_getenvAtsushi Nemoto
Add prom_getenv() which can be used for YAMON. This assumes other firmware should pass NULL for fw_arg2. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: TXx9: Improve handling of built-in and command-line argsAtsushi Nemoto
* Make prom_init_cmdline() static and be called from prom_init. * Append built-in args if the first character was '+'. * Drop command-line args if the first character of built-in was '-'. * Enclose args include spaces by quotes. * TX4938_NAND_BOOT is no longer needed. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: RBTX4927: More explicit initializationAtsushi Nemoto
* Make sure all interrupts cleared on startup * Initialize some GPIOs Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11MIPS: PMC MSP71XX gpio driversPatrick Glass
This new gpio driver for PMC-Sierra's MSP71xx SoC allows standard api calls for access to the general and extended gpio's. Signed-off-by: Patrick Glass <patrickglass@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio.c create mode 100755 arch/mips/pmc-sierra/msp71xx/gpio_extended.c create mode 100755 include/asm-mips/pmc-sierra/msp71xx/gpio.h
2008-10-11MIPS: Use compat_sys_ptraceThomas Bogendoerfer
This replaces mips's sys_ptrace32 with a compat_arch_ptrace and enables the new generic definition of compat_sys_ptrace instead. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-11[ARM] 5300/1: fixup spitz reset during bootDmitry Baryshkov
Some machines don't have the pullup/down on their reset pin, so configuring the reset generating pin as input makes them reset immediately. Fix that by making reset pin direction configurable. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-10ext4: Rename ext4dev to ext4Theodore Ts'o
The ext4 filesystem is getting stable enough that it's time to drop the "dev" prefix. Also remove the requirement for the TEST_FILESYS flag. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10Merge branch 'r8169' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2008-10-10myri10ge: update driver version number to 1.4.3-1.369Brice Goglin
Update myri10ge driver version number to 1.4.3-1.369. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10r8169: add shutdown handlerFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: preliminary 8168d supportFrancois Romieu
Taken from Realtek's 8.007.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ivan Vecera <ivecera@redhat.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: support additional 8168cp chipsetFrancois Romieu
Taken from Realtek's 8.007.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ivan Vecera <ivecera@redhat.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: change default behavior for mildly identified 8168c chipsetsFrancois Romieu
The addition of a new device has so far implied a specialization of these masks. While they identify 8168c devices, they can be expected to be further refined as they have been by Realtek so far. The change should bring the driver closer to the version 8.006.00 of Realtek's 8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: add a new 8168cp flavorFrancois Romieu
Taken from Realtek's 8.006.00 r8168 driver. I have left some bits related to jumbo frame aside for now. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: add a new 8168c flavor (bis)Francois Romieu
Taken from Realtek's 8.006.00 r8168 driver. I have left some bits related to jumbo frame aside for now. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: add a new 8168c flavorFrancois Romieu
Taken from Realtek's 8.006.00 r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: sync existing 8168 device hardware start sequences with vendor driverFrancois Romieu
This part of the driver should be reasonably in line with Realtek's 8.006.00 driver. I have left some bits related to jumbo frame and optional features aside for now. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: 8168b Tx performance tweakFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: make room for more specific 8168 hardware start procedureFrancois Romieu
Broadly speaking the 8168c* share some common code which will be factored in __rtl_hw_start_8168cp. The 8168b* share some code too but it will be a bit different. Any change of behavior should be confined to the currently unidentified 8168 chipsets. They will not be applied the Tx performance tweak and will emit a warning instead. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: shuffle some registers handling around (8168 operation only)Francois Romieu
I can not argue strongly for (or against) a specific ordering on a purely technical ground but the patch avoids to swallow Realtek's changes in one big, hard-to-read gulp. Let aside the way the RxConfig register is written (see rtl_set_rx_tx_config_registers / RxConfig / rtl_set_rx_mode), this change brings the registers write ordering closer with Realtek's driver one (version 8.006.00) for the 8168 chipsets. More 8168 specific code which touches the Configx registers will be added in the section covered by Cfg9346_UnLock / Cfg9346_Lock. This code should not be the cause of regression for 810x and 8110 users. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: new phy init parameters for the 8168bFrancois Romieu
The new parameters are synced with Realtek's driver version 8.006.00. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: update phy init parametersFrancois Romieu
The modified parameters are synced with Realtek's driver version 8.006.00. The change should only be noticeable with some 8168c. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
2008-10-10r8169: wake up the PHY of the 8168Francois Romieu
This is typically needed when some other OS puts the PHY to sleep due to the disabling of WOL options in the BIOS of the system. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Chiaki Ishikawa <chiaki.ishikawa@ubin.jp> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Cc: RyanKao <ryankao@realtek.com.tw>
2008-10-10af_key: fix SADB_X_SPDDELETE responseTobias Brunner
When deleting an SPD entry using SADB_X_SPDDELETE, c.data.byid is not initialized to zero in pfkey_spddelete(). Thus, key_notify_policy() responds with a PF_KEY message of type SADB_X_SPDDELETE2 instead of SADB_X_SPDDELETE. Signed-off-by: Tobias Brunner <tobias.brunner@strongswan.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10ide: Remove ide_spin_wait_hwgroup() and use special requests insteadElias Oltmanns
Use a special request for serialisation purposes and get rid of the awkward ide_spin_wait_hwgroup(). This also involves converting the ide_devset structure so it can be shared by the /proc and the ioctl code. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> [bart: use rq->cmd[] directly] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: move IDE{FLOPPY,TAPE}_WAIT_CMD defines to <linux/ide.h>Bartlomiej Zolnierkiewicz
While at it: * IDE{FLOPPY,TAPE}_WAIT_CMD -> WAIT_{FLOPPY,TAPE}_CMD * Use enum for WAIT_* defines. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_do_test_unit_ready() helperBartlomiej Zolnierkiewicz
* Add ide_do_test_unit_ready() helper and convert ide-{floppy,tape}.c to use it. * Remove no longer used idetape_create_test_unit_ready_cmd(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_do_start_stop() helperBartlomiej Zolnierkiewicz
* Add ide_do_start_stop() helper and convert ide-{floppy,tape}.c to use it. * Remove no longer used idefloppy_create_start_stop_cmd() and idetape_create_load_unload_cmd(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_set_media_lock() helperBartlomiej Zolnierkiewicz
* Set IDE_AFLAG_NO_DOORLOCK in idetape_get_mode_sense_result(), check it in ide_tape_set_media_lock() and cleanup idetape_create_prevent_cmd(). * Set IDE_AFLAG_NO_DOORLOCK in ide_floppy_create_read_capacity_cmd() and check it instead of IDE_AFLAG_CLIK_DRIVE in ide_floppy_set_media_lock(). * Add ide_set_media_lock() helper and convert ide-{floppy,tape}.c to use it. * Remove no longer used ide*_create_prevent_cmd()/ide*_set_media_lock(). * Update comment in <linux/ide.h> accordingly. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide-floppy: move floppy ioctls handling to ide-floppy_ioctl.cBartlomiej Zolnierkiewicz
While at it: - idefloppy_create_read_capacity_cmd() -> ide_floppy_create_read_capacity_cmd() - idefloppy_create_mode_sense_cmd() -> ide_floppy_create_mode_sense_cmd() - idefloppy_create_request_sense_cmd() -> ide_floppy_create_request_sense_cmd() - idefloppy_create_format_unit_cmd() -> ide_floppy_create_format_unit_cmd() - idefloppy_get_sfrp_bit() -> ide_floppy_get_sfrp_bit() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide-floppy: ->{srfp,wp} -> IDE_AFLAG_{SRFP,WP}Bartlomiej Zolnierkiewicz
Add IDE_AFLAG_{SRFP,WP} drive->atapi_flags and use them instead of ->{srfp,wp} struct ide_floppy_obj fields. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_queue_pc_tail() helperBartlomiej Zolnierkiewicz
* Add ide_queue_pc_tail() and convert ide-{floppy,tape}.c to use it instead of ide*_queue_pc_tail(). * Remove no longer used ide*_queue_pc_tail(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_queue_pc_head() helperBartlomiej Zolnierkiewicz
* Move REQ_IDETAPE_* enums to <linux/ide.h>. * Add ide_queue_pc_head() and convert ide-{floppy,tape}.c to use it instead of ide*_queue_pc_head(). * Remove no longer used ide*_queue_pc_head(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add ide_init_pc() helperBartlomiej Zolnierkiewicz
* Add IDE_PC_BUFFER_SIZE define. * Add ide_init_pc() and convert ide-{floppy,tape}.c to use it instead of ide*_init_pc(). * Remove no longer used IDE*_PC_BUFFER_SIZE and ide*_init_pc(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 01:45:34 +0000