aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-02-19[NETFILTER]: Fix incorrect use of skb_make_writableJoonwoo Park
http://bugzilla.kernel.org/show_bug.cgi?id=9920 The function skb_make_writable returns true or false. Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19[NETFILTER]: xt_u32: drop the actually unused variable from u32_match_itPavel Emelyanov
The int ret variable is used only to trigger the BUG_ON() after the skb_copy_bits() call, so check the call failure directly and drop the variable. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19[NETFILTER]: {ip,ip6,nfnetlink}_queue: fix SKB_LINEAR_ASSERT when mangling ↵Patrick McHardy
packet data As reported by Tomas Simonaitis <tomas.simonaitis@gmail.com>, inserting new data in skbs queued over {ip,ip6,nfnetlink}_queue triggers a SKB_LINEAR_ASSERT in skb_put(). Going back through the git history, it seems this bug is present since at least 2.6.12-rc2, probably even since the removal of skb_linearize() for netfilter. Linearize non-linear skbs through skb_copy_expand() when enlarging them. Tested by Thomas, fixes bugzilla #9933. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19ipv4/fib_hash.c: fix NULL dereferenceAdrian Bunk
Unless I miss a guaranteed relation between between "f" and "new_fa->fa_info" this patch is required for fixing a NULL dereference introduced by commit a6501e080c318f8d4467679d17807f42b3a33cd5 ("[IPV4] FIB_HASH: Reduce memory needs and speedup lookups") and spotted by the Coverity checker. Eric Dumazet says: Hum, you are right, kmem_cache_free() doesnt allow a NULL object, like kfree() does. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19net/9p/trans_virtio.c: kmalloc() enough memoryAdrian Bunk
The Coverity checker spotted that less memory than required was allocated. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19[RTNL]: Add missing link netlink attribute policy definitionsThomas Graf
IFLA_LINK is no longer a write-only attribute on the kernel side and must thus be validated. Same goes for the newly introduced IFLA_LINKINFO. Fixes undefined behaviour if either of the attributes are not well formed. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-19[NET]: Messed multicast lists after dev_mc_sync/unsyncJorge Boncompte [DTI2]
Commit a0a400d79e3dd7843e7e81baa3ef2957bdc292d0 ("[NET]: dev_mcast: add multicast list synchronization helpers") from you introduced a new field "da_synced" to struct dev_addr_list that is not properly initialized to 0. So when any of the current users (8021q, macvlan, mac80211) calls dev_mc_sync/unsync they mess the address list for both devices. The attached patch fixed it for me and avoid future problems. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[NIU]: Bump driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[NIU]: Fix BMAC alternate MAC address indexing.Matheos Worku
BMAC port alternate MAC address index needs to start at 1. Index 0 is used for the main MAC address. Signed-off-by: Matheos Worku <matheos.worku@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18net: fix kernel-doc warnings in header filesRandy Dunlap
Add missing structure kernel-doc descriptions to sock.h & skbuff.h to fix kernel-doc warnings. (I think that Stephen H. sent a similar patch, but I can't find it. I just want to kill the warnings, with either patch.) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[IPV6]: Use BUG_ON instead of if + BUG in fib6_del_route.Pavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[IPV6]: dst_entry leak in ip4ip6_err. (resend)Denis V. Lunev
The result of the ip_route_output is not assigned to skb. This means that - it is leaked - possible OOPS below dereferrencing skb->dst - no ICMP message for this case Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18bluetooth: do not move child device other than rfcommDave Young
hci conn child devices other than rfcomm tty should not be moved here. This is my lost, thanks for Barnaby's reporting and testing. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18bluetooth: put hci dev after del connDave Young
Move hci_dev_put to del_conn to avoid hci dev going away before hci conn. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[NET]: Elminate spurious print_mac() calls.David S. Miller
Patrick McHardy notes that print_mac() can get invoked even if the result it unused (f.e. as an argument to pr_debug() when DEBUG is not defined). Mark this function as "__pure" to eliminate this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-18[BLUETOOTH] hci_sysfs.c: Kill build warning.David S. Miller
net/bluetooth/hci_sysfs.c: In function ‘del_conn’: net/bluetooth/hci_sysfs.c:339: warning: suggest parentheses around assignment used as truth value Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[NET]: Remove MAC_FMTJoe Perches
MAC_FMT is no longer used Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17net/8021q/vlan_dev.c: Use print_mac.Joe Perches
Remove direct use of MAC_FMT Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[XFRM]: Fix ordering issue in xfrm_dst_hash_transfer().YOSHIFUJI Hideaki
Keep ordering of policy entries with same selector in xfrm_dst_hash_transfer(). Issue should not appear in usual cases because multiple policy entries with same selector are basically not allowed so far. Bug was pointed out by Sebastien Decugis <sdecugis@hongo.wide.ad.jp>. We could convert bydst from hlist to list and use list_add_tail() instead. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Sebastien Decugis <sdecugis@hongo.wide.ad.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[BLUETOOTH] net/bluetooth/hci_core.c: Use time_* macrosS.Çağlar Onur
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So following patch implements usage of the time_after() macro, defined at linux/jiffies.h, which deals with wrapping correctly Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[IPV6]: Fix hardcoded removing of old module codeWang Chen
Rusty hardcoded the old module code. We can remove it now. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[NETLABEL]: Move some initialization code into __init section.Pavel Emelyanov
Everything that is called from netlbl_init() can be marked with __init. This moves 620 bytes from .text section to .text.init one. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[NETLABEL]: Shrink the genl-ops registration code.Pavel Emelyanov
Turning them to array and registration in a loop saves 80 lines of code and ~300 bytes from text section. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[AX25] ax25_out: check skb for NULL in ax25_kick()Jarek Poplawski
According to some OOPS reports ax25_kick tries to clone NULL skbs sometimes. It looks like a race with ax25_clear_queues(). Probably there is no need to add more than a simple check for this yet. Another report suggested there are probably also cases where ax25 ->paclen == 0 can happen in ax25_output(); this wasn't confirmed during testing but let's leave this debugging check for some time. Reported-and-tested-by: Jann Traschewski <jann@gmx.de> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[TCP]: Fix tcp_v4_send_synack() commentKris Katterjohn
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17[IPV4]: fix alignment of IP-Config outputUwe Kleine-Koenig
Make the indented lines aligned in the output (not in the code). Signed-off-by: Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17Documentation: fix tcp.txtMatti Linnanvuori
Replace BIC with CUBIC as default congestion control. Fix grammar. Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17net/9p/trans_virtio.c: Use BUG_ONJulia Lawall
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no side-effects to allow a definition of BUG_ON that drops the code completely. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ disable unlikely @ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (unlikely(E)) { BUG(); } + BUG_ON(E); ) @@ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17net/rxrpc: Use BUG_ONJulia Lawall
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no side-effects to allow a definition of BUG_ON that drops the code completely. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ disable unlikely @ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (unlikely(E)) { BUG(); } + BUG_ON(E); ) @@ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17Revert "[NDISC]: Fix race in generic address resolution"David S. Miller
This reverts commit 69cc64d8d92bf852f933e90c888dfff083bd4fc9. It causes recursive locking in IPV6 because unlike other neighbour layer clients, it even needs neighbour cache entries to send neighbour soliciation messages :-( We'll have to find another way to fix this race. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-17Revert "[RTNETLINK]: Send a single notification on device state changes."David S. Miller
This reverts commit 45b503548210fe6f23e92b856421c2a3f05fd034. It break locking around dev->link_mode as well as cause other bootup problems. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-15Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-02-15Merge branch 'fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-02-15b43legacy: Add driver load messagesStefano Brivio
This adds printk messages with basic information about the driver being loaded. This information includes a summary of the compiled-in features, which simplifies bug-reporting and debugging a lot. Also a firmware ID is printed. This is a unique identifier blob for a specific version of the firmware. This ID is attached to a specific version of the firmware blob in b43-fwcutter (see fwcutter git). This helps users to select the right firmware for their device. This also makes it possible to use automated scripts to fetch and extract the right firmware for the driver. (The script will grep the .ko for the "Firmware-ID: xxx" string.) While the driver might still support other versions of the firmware for backward compatibility, this will always print out the officially supported version, which people _should_ use. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15ipw2200: fix ucode assertion for RX queue overrunDan Williams
Restock the RX queue when there are a lot of unused frames so that the RX ring buffer doesn't overrun, causing a ucode assertion. Backport of patch "iwlwifi: fix ucode assertion for RX queue overrun". Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15iwlwifi: only check for association id when associating with APReinette Chatre
There is no association process in IBSS mode - so testing the association id is not needed. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> CC: Richard Scherping <richard@scherping.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15iwlwifi: reverting 'misc wireless annotations' patch for iwlwifiTomas Winkler
This patch revert commit blow that wrongly suppressed sparse warning in iwlwifi eeprom reading In addtion it suppresses correctly the iwlwifi eeprom register reading anomaly. commit 45883ae47a0a4700c0f4716dc75a255cccdc3a76 misc wireless annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15b43legacy: fix firmware load message levelStefano Brivio
The firmware version information should always get printed. Not only on a debug build. The patch by Michael Buesch has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15b43legacy: add firmware information to modinfoStefano Brivio
This adds the firmware ID to modinfo. The patch by Michael Buesch has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15mac80211: Fix initial hardware configurationMichael Buesch
On the initial device-open we need to defer the hardware reconfiguration after we incremented the open_count, because the hw_config checks this flag and won't call the lowlevel driver in case it is zero. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15rt2x00: Add new USB ID to rt2500usbIvo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15b43: Fix firmware load message levelMichael Buesch
The firmware version information should always get printed. Not only on a debug build. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15b43: Add firmware information to modinfoMichael Buesch
This adds the firmware ID to modinfo. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15b43: Add driver load messagesMichael Buesch
This adds printk messages with basic information about the driver being loaded. This information includes a summary of the compiled-in features, which simplifies bug-reporting and debugging a lot. Also a firmware ID is printed. This is a unique identifier blob for a specific version of the firmware. This ID is attached to a specific version of the firmware blob in b43-fwcutter (see fwcutter git). This helps users to select the right firmware for their device. This also makes it possible to use automated scripts to fetch and extract the right firmware for the driver. (the script will grep the .ko for the "Firmware-ID: xxx" string. While the driver might still support other versions of the firmware for backward compatibility, this will always print out the officially supported version, which people _should_ use. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15b43legacy: fix DMA for 30/32-bit DMA enginesStefano Brivio
This checks if the DMA address is bigger than what the controller can manage. It will reallocate the buffers in the GFP_DMA zone in that case. The patch by Michael Buesch has been ported to b43legacy. Thanks to Matti Viljanen for reporting this. Cc: Matti Viljanen <viljanen.matti@gmail.com> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15iwlwifi: earlier rx allocationMohamed Abbas
Value of count is used to decide when to replenish rx buffers. If it is equal or above 8 we replenish the buffers. Ensure there is no starvation by initializing count to 8 - thus forcing replenish at first iteration. This is helpful when rx receives batches of buffers smaller than 8. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15iwlwifi: Don't send host commands on rfkillGregory Greenman
This patch prevents sending host commands when rfkill is on Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15iwlwifi: do not clear GEO_CONFIGURED bit when calling _downReinette Chatre
The geos information is set up during probe and should only be removed during pci_remove, not during _down. This is a temporary fix until the setting of the status bits have been cleaned up (to explicitly match all setting with clearing of status bits). Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15rndis_wlan: enable stall workaround by link quality instead of link speedJussi Kivilinna
Enable workaround for poor link stalls by link quality instead of link speed. Using link speed caused workaround be active always on 802.11b networks which reduced performance and not even catch all stalls. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-15ath5k: correct padding in tx descriptorsBruno Randolf
when setting up the tx descriptors for the hardware we must account for any padding between the header and the data we might have added previously. frame len is the length of the frame in the air (including FCS but no padding) and buffer len is the length of the buffer (including padding, but without FCS). changing the way ah_setup_tx_desc is called: now excluding the FCS, since it's easier to add that in the function where we need it. before this fix we sent trailing zero bytes after the packet (because frame len included the padding) which was not a big problem without WEP, but with WEP this resultes in a wrong WEP checksum and the packet is discarded - which is how i noticed at all ;) an easy way to run into header padding problems, btw, is to connect to a QoS (WME) enabled access point (eg. madwifi) - QoS data frames are 2 byte longer and will require padding. this patch applies on top of luis latest patch series from 04.02.2008. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:52:57 +0000