aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-10-23[AVR32] Implement at32_add_device_cf()Haavard Skinnemoen
Implement at32_add_device_cf() which will add a platform_device for the at32_cf driver (not merged yet). Separate out most of the at32_add_device_ide() code and use it to implement at32_add_device_cf() as well. This changes the API in the following ways: * The board code must initialize data->cs to the chipselect ID to use before calling any of these functions. * The board code must use GPIO_PIN_NONE to indicate unused CF pins. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-23[AVR32] Implement more at32_add_device_foo() functionsHaavard Skinnemoen
Implement functions for adding platform devices for TWI, MCI, AC97C and ABDAC. They may need to be modified to cope with platform data, etc. when the corresponding drivers are ready to be merged, but such changes are much less likely to conflict than adding support for a whole new type of device. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-23[AVR32] Fix a couple of sparse warningsHaavard Skinnemoen
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-23[AVR32] Wire up AT73C213 sound driver on ATSTK1000 boardHans-Christian Egtvedt
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-23[AVR32] Platform code for pata_at32Kristoffer Nyborg Gregertsen
This patch adds platform code for PATA devices on the AP7000. [hskinnemoen@atmel.com: board code left out for now since stk1000 doesn't support IDE out of the box] Signed-off-by: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2007-10-23intel-iommu: fix sg_page()FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23parisc: fix sg_page() falloutFUJITA Tomonori
arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_map_sg': arch/parisc/kernel/pci-dma.c:487: error: 'struct scatterlist' has no member named 'page' arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_unmap_sg': arch/parisc/kernel/pci-dma.c:508: error: 'struct scatterlist' has no member named 'page' arch/parisc/kernel/pci-dma.c:508: error: 'struct scatterlist' has no member named 'page' arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_sync_sg_for_cpu': arch/parisc/kernel/pci-dma.c:535: error: 'struct scatterlist' has no member named 'page' arch/parisc/kernel/pci-dma.c:535: error: 'struct scatterlist' has no member named 'page' arch/parisc/kernel/pci-dma.c: In function 'pa11_dma_sync_sg_for_device': arch/parisc/kernel/pci-dma.c:545: error: 'struct scatterlist' has no member named 'page' arch/parisc/kernel/pci-dma.c:545: error: 'struct scatterlist' has no member named 'page' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23ide: build fixFUJITA Tomonori
git-drivers/ide/ide-probe.c: In function 'hwif_init': drivers/ide/ide-probe.c:1327: error: implicit declaration of function 'sg_init_table' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23net: fix xfrm build - missing scatterlist.h includeHeiko Carstens
net/xfrm/xfrm_algo.c: In function 'skb_icv_walk': net/xfrm/xfrm_algo.c:555: error: implicit declaration of function 'sg_set_page' make[2]: *** [net/xfrm/xfrm_algo.o] Error 1 Cc: David Miller <davem@davemloft.net> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23[BLOCK] blk_rq_map_sg: force clear termination bitJens Axboe
Since blk_rq_map_sg() sets the termination bit at the end of the sg table, we could see it prematurely on the next mapping unless we force drivers to do a full sg_init_table() prior to each mapping. So force clear the termination bit to avoid having to put that clear in the driver for every mapping. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23[BLOCK] Don't clear sg_dma_len/addr() in blk_rq_map_sg()Jens Axboe
It's not a proper lvalue on all archs. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23s390 zfcp: sg fixupsJens Axboe
Based on initial patch from Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23powerpc: Fix fallout from sg_page() changesOlof Johansson
Fix fallout from 18dabf473e15850c0dbc8ff13ac1e2806d542c15: In file included from include/linux/dma-mapping.h:52, from drivers/base/dma-mapping.c:10: include/asm/dma-mapping.h: In function 'dma_map_sg': include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:289: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:290: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h: In function 'dma_sync_sg_for_cpu': include/asm/dma-mapping.h:331: error: 'struct scatterlist' has no member named 'page' drivers/scsi/ps3rom.c: In function 'fetch_to_dev_buffer': drivers/scsi/ps3rom.c:150: error: 'struct scatterlist' has no member named 'page' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23IB/ehca: Fix sg_page() falloutOlof Johansson
More fallout from sg_page changes: drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user1': drivers/infiniband/hw/ehca/ehca_mrmw.c:1779: error: 'struct scatterlist' has no member named 'page' drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_check_kpages_per_ate': drivers/infiniband/hw/ehca/ehca_mrmw.c:1835: error: 'struct scatterlist' has no member named 'page' drivers/infiniband/hw/ehca/ehca_mrmw.c: In function 'ehca_set_pagebuf_user2': drivers/infiniband/hw/ehca/ehca_mrmw.c:1870: error: 'struct scatterlist' has no member named 'page' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23arm: build fixFUJITA Tomonori
arch/arm/common/dmabounce.c: In function 'dma_map_sg': arch/arm/common/dmabounce.c:445: error: implicit declaration of function 'sg_page' Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23[ALSA] version 1.0.15Jaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix possible array overflowTakashi Iwai
dac_nids arrays in each codec support code may have up to 5 items when assigned from the auto-configurator. Some codec codes have less numbers than the possible max. This patch defines the constant and fixes the array definitions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] sound/core/control.c: hard-irq-safe -> hard-irq-unsafe lock warningBorislav Petkov
The lock grabbed in snd_ctl_empty_read_queue() is hardirq-unsafe but we hold an hardirq-safe one already, so make the &ctl->read_lock also hard-irq-safe. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] usb-audio: Another USB mic quirk for Logitech Communicator webcamDawid Wrobel
The patch adds the USB microphone quirk for Logitech Communicator (046d:08f5 Logitech, Inc.) webcam. Signed-off-by: Dawid Wrobel <dawid@klej.net> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix build without CONFIG_SND_HDA_GENERICTakashi Iwai
Fixed the build error from patch_sigmatel.c when built without CONFIG_SND_HDA_GENERIC by defining a dummy function to return error. Also, clean up hda_codec.c by removing unneeded ifdefs (the compiler will optimize out). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix Conexant 5045 volumesTakashi Iwai
Fixed the init verbs and added the missing volume controls so that the driver works again with Conexant 5045 codec chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix conflict of Master volume in STAC92xx codecTakashi Iwai
The addition of volume knob as Master volume resulted in conflict with the existing one by stac92xx_auto_create_hp_ctls(). This patch fixes the conflict, and still keeps the Master control for codecs without volume knob as much as possible. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] snd-bt87x: Make the load_all option work correctlyTrent Piepho
If the load_all option was turned on all cards would be treated as unknown, even those which are in the database. Of course, if the card is in the database there is no reason to use the load_all option. It's there to force loading when the card isn't in the database. But there are out of date wikis that say to do this and some distros might turn this option on by default. So, we keep the load_all option from turning known cards into unknown cards. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] protect Dreamcast PCM driver (AICA) from G2 bus effectsAdrian McMenamin
The G2 bus on the SEGA Dreamcast connects both the maple peripheral bus and the AICA sound memory. DMA requests on one can cause the other to timeout on memory operations. This patch prevents maple interrupts from causing hiccoughs in the AICA sound (maple bus code will land in 2.6.24). There are other cleanups for this (AICA) code - but this is in effect a regression fix rather than a cleanup. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] bt87x - Fix section mismatchTakashi Iwai
const and __devinit aren't a good pair, resulting in a section mismatch error. Let's remove const as a temporary solution. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] hda-codec - Fix AD1986A Lenovo auto-muteTakashi Iwai
The jack detection bit on AD1986A Lenovo N100 seems inverse from the standard definition. Now fixed the detection properly. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23[ALSA] This simplifies and fixes waiting loops of the mce_down()Krzysztof Helt
function after Trent Piepho's patch for AD1848. It also makes busy_wait() function call not atomic. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-23Use "struct boot_params" in example launcherRusty Russell
Now that the "struct boot_params" is userspace accessible, we don't need magic numbers. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Loading bzImage directly.Rusty Russell
Now arch/i386/boot/compressed/head.S understands the hardware_platform field, we can directly execute bzImages. No more horrific unpacking code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Revert lguest magic and use hook in head.SRusty Russell
Version 2.07 of the boot protocol uses 0x23C for the hardware_subarch field, that for lguest is "1". This allows us to use the standard boot entry point rather than the "GenuineLguest" string hack. The standard entry point also clears the BSS and copies the boot parameters and commandline for us, saving more code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Update lguest documentation to reflect the new virtual block device name.Chris Malley
Signed-off-by: Chris Malley <mail@chrismalley.co.uk> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23generalize lgread_u32/lgwrite_u32.Rusty Russell
Jes complains that page table code still uses lgread_u32 even though it now uses general kernel pte types. The best thing to do is to generalize lgread_u32 and lgwrite_u32. This means we lose the efficiency of getuser(). We could potentially regain it if we used __copy_from_user instead of copy_from_user, but I'm not certain that our range check is equivalent to access_ok() on all platforms. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Jes Sorensen <jes@sgi.com>
2007-10-23Example launcher handle guests not being ready for inputRusty Russell
We currently discard console and network input when the guest has no input buffers. This patch changes that, so that we simply stop listening to that fd until the guest refills its input buffers. This is particularly important because hvc_console without interrupts does backoff polling and so often lose characters if we discard. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Update example launcher for virtioRusty Russell
Implements virtio-based console, network and block servers. The block server uses a thread so it's async, which is an improvement over the old synchronous implementation (but a little more complex). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Lguest support for VirtioRusty Russell
This makes lguest able to use the virtio devices. We change the device descriptor page from a simple array to a variable length "type, config_len, status, config data..." format, and implement virtio_config_ops to read from that config data. We use the virtio ring implementation for an efficient Guest <-> Host virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the host when it changes. We also use LHCALL_NOTIFY on kernel addresses for very very early console output. We could have another hypercall, but this hack works quite well. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Remove old lguest I/O infrrasructure.Rusty Russell
This patch gets rid of the old lguest host I/O infrastructure and replaces it with a single hypercall "LHCALL_NOTIFY" which takes an address. The main change is the removal of io.c: that mainly did inter-guest I/O, which virtio doesn't yet support. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Remove old lguest bus and drivers.Rusty Russell
This gets rid of the lguest bus, drivers and DMA mechanism, to make way for a generic virtio mechanism. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Virtio helper routines for a descriptor ringbuffer implementationRusty Russell
These helper routines supply most of the virtqueue_ops for hypervisors which want to use a ring for virtio. Unlike the previous lguest implementation: 1) The rings are variable sized (2^n-1 elements). 2) They have an unfortunate limit of 65535 bytes per sg element. 3) The page numbers are always 64 bit (PAE anyone?) 4) They no longer place used[] on a separate page, just a separate cacheline. 5) We do a modulo on a variable. We could be tricky if we cared. 6) Interrupts and notifies are suppressed using flags within the rings. Users need only get the ring pages and provide a notify hook (KVM wants the guest to allocate the rings, lguest does it sanely). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dor Laor <dor.laor@qumranet.com>
2007-10-23Module autoprobing support for virtio drivers.Rusty Russell
This adds the logic to convert the virtio ids into module aliases, and includes a modalias entry in sysfs and the env var to make probing work. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Virtio console driverRusty Russell
This is an hvc-based virtio console driver. It's suboptimal becuase hvc expects to have raw access to interrupts and virtio doesn't assume that, so it currently polls. There are two solutions: expose hvc's "kick" interface, or wean off hvc. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Block driver using virtio.Rusty Russell
The block driver uses scatter-gather lists with sg[0] being the request information (struct virtio_blk_outhdr) with the type, sector and inbuf id. The next N sg entries are the bio itself, then the last sg is the status byte. Whether the N entries are in or out depends on whether it's a read or a write. We accept the normal (SCSI) ioctls: they get handed through to the other side which can then handle it or reply that it's unsupported. It's not clear that this actually works in general, since I don't know if blk_pc_request() requests have an accurate rq_data_dir(). Although we try to reply -ENOTTY on unsupported commands, ioctl(fd, CDROMEJECT) returns success to userspace. This needs a separate patch. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <jens.axboe@oracle.com>
2007-10-23Net driver using virtioRusty Russell
The network driver uses two virtqueues: one for input packets and one for output packets. This has nice locking properties (ie. we don't do any for recv vs send). TODO: 1) Big packets. 2) Multi-client devices (maybe separate driver?). 3) Resolve freeing of old xmit skbs (Christian Borntraeger) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org
2007-10-23Virtio interfaceRusty Russell
This attempts to implement a "virtual I/O" layer which should allow common drivers to be efficiently used across most virtual I/O mechanisms. It will no-doubt need further enhancement. The virtio drivers add buffers to virtio queues; as the buffers are consumed the driver "interrupt" callbacks are invoked. There is also a generic implementation of config space which drivers can query to get setup information from the host. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dor Laor <dor.laor@qumranet.com> Cc: Arnd Bergmann <arnd@arndb.de>
2007-10-23Boot with virtual == physical to get closer to native Linux.Rusty Russell
1) This allows us to get alot closer to booting bzImages. 2) It means we don't have to know page_offset. 3) The Guest needs to modify the boot pagetables to create the PAGE_OFFSET mapping before jumping to C code. 4) guest_pa() walks the page tables rather than using page_offset. 5) We don't use page_offset to figure out whether to emulate: it was always kinda quesationable, and won't work for instructions done before remapping (bzImage unpacking in particular). 6) We still want the kernel address for tlb flushing: have the initial hypercall give us that, too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Allow guest to specify syscall vector to use.Rusty Russell
(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch). This patch allows Guests to specify what system call vector they want, and we try to reserve it. We only allow one non-Linux system call vector, to try to avoid DoS on the Host. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Rename "cr3" to "gpgdir" to avoid x86-specific naming.Rusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Pagetables to use normal kernel typesMatias Zabaljauregui
This is my first step in the migration of page_tables.c to the kernel types and functions/macros (2.6.23-rc3). Seems to be working OK. Signed-off-by: Matias Zabaljauregui <matias.zabaljauregui@cern.ch> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23lguest.h declares a struct timespec, make it include linux/time.hJes Sorensen
Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Move register setup into i386_core.cJes Sorensen
Move setup_regs() to lguest_arch_setup_regs() in i386_core.c given that this is very architecture specific. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Change example launcher to use unsigned long not u32Jes Sorensen
Apply Clue 2x4 to lguest userland<->kernel handling code and the lguest launcher. Pointers are not to be passed in u32's! Basic rule of thumb: Anything passing u32's back and forth should be passing unsigned longs to be portable to 64 bit archs. For those who forgotten already, I repeat: NO POINTERS IN u32! Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 04:10:58 +0000