aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-13pmac: remove needless pmac_ide_destroy_dmatable() wrapperBartlomiej Zolnierkiewicz
hwif->sg_nents is always != 0 when this function is called and there is also no need to explicitely zero hwif->sg_nents. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13pmac: remove superfluous pmif == NULL checksBartlomiej Zolnierkiewicz
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: Two fixes regarding memory allocationElias Oltmanns
In function ide_devset_execute() we should use __GFP_WAIT rather than GFP_KERNEL. Also, the allocation cannot possibly fail at that point. More importantly, there is a potential memory leak in the device probing code. The infrastructure seems rather complex and I hope I haven't messed anything up by trying to fix this. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> [bart: remove superfluous ide_lock taking] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: move /proc handling to ide-disk_proc.c (take 3)Bartlomiej Zolnierkiewicz
While at it: - idedisk_capacity() -> ide_disk_capacity() - idedisk_proc[] -> ide_disk_proc[] - idedisk_settings[] -> ide_disk_settings[] v2/3: Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: move all ioctl handling to ide-disk_ioctl.cBartlomiej Zolnierkiewicz
While at it: - idedisk_ioctl() -> ide_disk_ioctl() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-floppy: move /proc handling to ide-floppy_proc.c (take 2)Bartlomiej Zolnierkiewicz
While at it: - idefloppy_capacity() -> ide_floppy_capacity() - idefloppy_proc[] -> ide_floppy_proc[] - idefloppy_settings[] -> ide_floppy_settings[] v2: Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-floppy: move all ioctl handling to ide-floppy_ioctl.c (take 2)Bartlomiej Zolnierkiewicz
While at it: - idefloppy_ioctl() -> ide_floppy_ioctl() v2: Fix for idefloppy_ioctl name change from Stephen Rothwell. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-cd: no need to zero drive->special.allBartlomiej Zolnierkiewicz
Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()Bartlomiej Zolnierkiewicz
Set IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI device drivers *_setup() methods. While at it: - use ata_id_cdb_intr() There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove ide_host_alloc_all()Bartlomiej Zolnierkiewicz
* Remove no longer used ide_host_alloc_all(). * Add MAX_HOST_PORTS define and use it instead of MAX_HWIFS as the maximum number of host ports possible. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-generic: remove no longer needed ide_probe_legacy()Bartlomiej Zolnierkiewicz
There is now a generic solution [ide_generic_check_pci_legacy_iobases()] so MIPS-specific ide_probe_legacy() is no longer necessary. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-generic: no need to probe all ports at onceBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: ->ide_dma_clear_irq() -> ->clear_irq()Bartlomiej Zolnierkiewicz
* Rename ->ide_dma_clear_irq method to ->clear_irq and move it from ide_hwif_t to struct ide_port_ops. * Move ->waiting_for_dma check inside ->clear_irq method. * Move ->dma_base check inside ->clear_irq method. piix.c: * Add ich_port_ops and remove init_hwif_ich() wrapper. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: use unique names for struct pci_driver instancesBartlomiej Zolnierkiewicz
Noticed-by: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr()Bartlomiej Zolnierkiewicz
* Add 'struct task_s' to ide_hwif_t and init it to the current command in do_rw_taskfile(). * Merge all TASKFILE_NO_DATA data phase handlers into taskfile_no_intr(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: factor out reset error reporting from reset_pollfunc()Bartlomiej Zolnierkiewicz
Factor out reset error reporting from reset_pollfunc() to ide_reset_report_error() helper. While at it: - fix KERN_* printk() levels - remove 'switch ()' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: convert 'pio_mode' device setting to use DS_SYNC flagBartlomiej Zolnierkiewicz
* Convert 'pio_mode' device setting to use DS_SYNC flag. * Remove unused special_t.b.{set_tune,serviced} and ide_drive_t.tune_req. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove [ata_]select_tBartlomiej Zolnierkiewicz
* Use 'drive->dn & 1' in ide_init_disk(). * remove [ata_]select_t. While at it: * Use ATA_DEVICE_OBS define in ide_port_init_devices_data(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: use 'drive->dn & 1' instead of drive->select.b.unitBartlomiej Zolnierkiewicz
* Call ide_port_init_devices() in ide_host_register() also if 'struct ide_port_info *d' is not available. * Init drive->dn in ide_port_init_devices() instead of ide_probe_port() so it is valid also in ->init_dev. * Pass device number to ide_dev_apply_params(). * Use 'drive->dn & 1' instead of drive->select.b.unit. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13cy82c693: remove no longer needed CY82C693_DEBUG_LOGS codeBartlomiej Zolnierkiewicz
Having CY82C693_DEBUG_INFO is enough nowadays. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13cy82c693: remove dead CY82C693_SETDMA_CLOCK codeBartlomiej Zolnierkiewicz
Remove dead CY82C693_SETDMA_CLOCK code and now not needed init_chipset_cy82c693(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: sanitize ide*_pm_* enumsBartlomiej Zolnierkiewicz
* Move ide*_pm_* enums from ide-io.c to <linux/ide.h>. * idedisk_pm_* -> ide_pm_* * ide_pm_state_* -> ide_pm_* * No need to set ide_pm_* enums to the fixed values. * Uppercase ide_pm_* enums. * Fix/update comments. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: fix HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devicesBartlomiej Zolnierkiewicz
Add IDE_DFLAG_LBA device flag and use it instead of ->select.b.lba. Since ->tf_load uses ->select.all for ATA Device/Head register this fixes HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove superfluous ->waiting_for_dma checksBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove superfluous ->dma field from ide_hwif_tBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove superfluous ->media field from ide_driver_tBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: DMA_PIO_RETRY -> IDE_DFLAG_DMA_PIO_RETRYBartlomiej Zolnierkiewicz
Add IDE_DFLAG_DMA_PIO_RETRY and use it instead of ide_drive_t.state + DMA_PIO_RETRY. There should be no functional changes cause by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add device flagsBartlomiej Zolnierkiewicz
Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: add ide_do_setfeature() helperBartlomiej Zolnierkiewicz
Add ide_do_setfeature() helper and convert set_{wcache,acoustic}() to use it. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-disk: set_addressing() fixesBartlomiej Zolnierkiewicz
* Return -EIO if arg > 0 and LBA48 is unsupported. * No need to reset ->addressing. * Make ->addressing a single bit flag. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: fix IDE ACPI for slave device-only configurationsBartlomiej Zolnierkiewicz
ACPI _GTM / _PS0 / _STM were not called if only slave device was present. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-floppy: add a debug_mask module parameterBorislav Petkov
... with which to control to verbosity of debug messages on module load time. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: no need to zero debug_mask + move module_param() closer debug_mask] [bart: init drive->debug_mask in ide_floppy_probe() not in idefloppy_open()] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide-floppy: convert driver to the new debugging macroBorislav Petkov
Also: - leave in the possibility for optimizing away all debugging macros - add a PFX macro and prepend all printk calls with it for consistency - change idefloppy_create_rw_cmd's 1st arg from idefloppy_floppy_t * to ide_drive_t *. - add a missing printk-level in idefloppy_init - fix minor checkpatch warnings Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add a driver-wide debugging macroBorislav Petkov
Add __ide_debug_log() debugging macro which is controlled by drive->debug_mask. The macro has to have the macro DRV_NAME defined in each driver before use. Also, add different debugging levels depending on the functionality debugged. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add drive->debug_mask switchBorislav Petkov
Add a debugging on/off switch for controlling driver debugging messages dynamically. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: unify conversion macrosBorislav Petkov
Introduce to_ide_drv() and ide_drv_g() macros and replace the respective definitions of similar ones in each driver. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13xtensa: remove dead CONFIG_BLK_DEV_IDE codeAdrian Bunk
I don't know why this was there, but it was dead code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: chris@zankel.net Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove unnecessary MAX_HWIFS checks from ide-probe.cBartlomiej Zolnierkiewicz
MAX_HWIFS is now always equal to the number of IDE major numbers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove CONFIG_BLK_DEV_IDE config option (take 2)Bartlomiej Zolnierkiewicz
Because hd.c was moved to drivers/block/ this config option is superfluous now and may be removed. v2: Fix drivers/ide/Makefile (noticed by Adrian Bunk). Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_transfer_pc() staticBartlomiej Zolnierkiewicz
* Move ->ticks field from struct ide_floppy_obj to ide_drive_t. * Move idefloppy_transfer_pc() to ide-atapi.c and make ide_transfer_pc() use it. * Always use ide_transfer_pc as a handler in ide_issue_pc(). * Remove no longer used idefloppy_start_pc_transfer(), ide*_transfer_pc() and 'handler' argument from ide_issue_pc(). * Make ide_transfer_pc() static. While at it: * idefloppy_transfer_pc() -> ide_delayed_transfer_pc() * IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY * ->ticks -> ->pc_delay There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: make ide_pc_intr() staticBartlomiej Zolnierkiewicz
* Always use ide_pc_intr as a handler in ide_pc_intr(). * Remove no longer used ide*_pc_intr() and 'handler' argument from ide_{transfer_pc,pc_intr}(). * Make ide_pc_intr() static. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add ->pc_{update,io}_buffers methodsBartlomiej Zolnierkiewicz
Add ->pc_{update,io}_buffers methods to ide_drive_t and use them instead of {update,io}_buffers ide_pc_intr() arguments. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add ide_retry_pc() helperBartlomiej Zolnierkiewicz
* Add ide_create_request_sense_cmd() and ide_retry_pc() helpers and convert ide-{atapi,floppy,tape}.c to use them. * Remove no longer used ide*_create_request_sense_cmd(), ide*_retry_pc() and 'retry_pc' argument from ide_pc_intr(). * Make ide_queue_pc_head() static. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add request_sense_{pc,rq} to ide_drive_tBartlomiej Zolnierkiewicz
Add 'struct ide_atapi_pc request_sense_pc' and 'request request_sense_rq' to ide_drive_t and use them instead of fields in struct ide_{floppy,tape}_obj. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: drop 'timeout' and 'expiry' arguments from ide_pc_intr()Bartlomiej Zolnierkiewicz
* Move idescsi_expiry() to ide-atapi.c. * Move get_timeout() to <linux/ide.h>. * Drop 'timeout' and 'expiry' arguments from ide_pc_intr(). While at it: * idescsi_expiry() -> ide_scsi_expiry() * get_timeout() -> ide_scsi_get_timeout() There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add pointer to the current packet command to ide_drive_tBartlomiej Zolnierkiewicz
* Add pointer to the current packet command (struct ide_atapi_pc *pc) to ide_drive_t and use it instead of the pointer in struct ide_*_obj. * Use drive->pc in ide_{issue,transfer}_pc() and ide_pc_intr() instead of 'pc' argument. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: drop dsc_handle argument from ide_pc_intr()Bartlomiej Zolnierkiewicz
* Add 'int dsc' argument to ->pc_callback method. * Call ide_tape_handle_dsc() internally in ide_tape_callback() if dsc argument is set and update ide_pc_intr() accordingly. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13sgiioc4: fix messagesSergei Shtylylov
Fix several issues with the log messages printed by ide_dma_sgiioc4() and sgiioc4_ide_setup_pci_device(): - IOC4 registers are memory-mapped but the "BM-DMA at" format corresponds to I/O mapped registers; - "%p" format specifiers and type casts used to print non-pointer values; - using KERN_INFO log level for the error message; - 'hwif->name' printed as drive's name. While at it, also: - return more fitting -EBUSY if request_mem_region() fails; - make the error message style consistent; - fix indentation, put the printk() facility and message on the same line; - use comparisions with NULL instead of ! operator.. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13sgiioc4: sgiioc4_read_status drive busy check fixSergei Shtylylov
Fix the drive non-busy criterion used by sgiioc4_read_status(): neither of the bits it expects to be set guarantees that the drive is not busy (and might be interrupting), only the BSY bit itself being zero gurantees that. While at it, use ATA_BUSY instead of hardcoded value everywhere... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: jeremy@sgi.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13vfs: Use const for kernel parser tableSteven Whitehouse
This is a much better version of a previous patch to make the parser tables constant. Rather than changing the typedef, we put the "const" in all the various places where its required, allowing the __initconst exception for nfsroot which was the cause of the previous trouble. This was posted for review some time ago and I believe its been in -mm since then. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Alexander Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 10:22:18 +0000