aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-08-01ath5k: Update phy calibration functionsNick Kossifidis
* Enable I/Q calibration each time we have correction results (we were only enabling calibration during reset). If we don't we commit the same results each time calibration routine is called. * Add some documentation and a TODO on nf calibration * Return -EAGAIN on noise floor timeout/failure Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Update channel functionsNick Kossifidis
* Add channel function for RF2425 (got this from decompiling binary HAL, i have no idea why there is a 5GHz section but i'm looking into it) * Update RF5112 channel function (also got this from decompiling binary HAL) * Set JAPAN setting for channel 14 on all PHY chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Add RF2425 initial rfgain valuesNick Kossifidis
* Add initial RF gain settings for RF2425 Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Reorder calibration calls during reset and update hw_set_powerNick Kossifidis
* Update ath5k_hw_reset and add some more documentation about PHY calibration * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep * Preserve sleep duration field while setting AR5K_SLEEP_CTL and reduce delays & checks for register's status (got this from decompiling & dumps, it works for me but it needs testing) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Do ADC test during resetNick Kossifidis
* Do an ADC test during reset to match recent regdumps Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Misc hw_reset updatesNick Kossifidis
* Update hw_reset to calculate some of the values we were using as static * Increase activation to rx delay Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Misc hw_attach fixesNick Kossifidis
* Correctly attach RF2425 * Update SREV values for Radio chips * Update hw_attach to use new SPENDING values * Write a bit after POST for some chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Restore saved initval after POSTNick Kossifidis
* Restore saved initial value after POST Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Update register listNick Kossifidis
* Update list of registers * Use updated register macros inside hw.c, initvals.c and debug.c Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-31tcp: MD5: Fix IPv6 signaturesAdam Langley
Reported by Stefanos Harhalakis; although 2.6.27-rc1 talks to itself using IPv6 TCP MD5 packets just fine, Stefanos noted that tcpdump claimed that the signatures were invalid. I broke this in 49a72dfb8814c2d65bd9f8c9c6daf6395a1ec58d ("tcp: Fix MD5 signatures for non-linear skbs"), it was just a typo. Note that tcpdump will still sometimes claim that the signatures are incorrect. A patch to tcpdump has been submitted for this[1]. [1] http://tinyurl.com/6a4fl2 Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31skbuff: add missing kernel-doc for do_not_encryptRandy Dunlap
Add missing kernel-doc notation to sk_buff: Warning(linux-2.6.27-rc1-git2//include/linux/skbuff.h:345): No description found for parameter 'do_not_encrypt' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31net/ipv4/route.c: fix build errorIngo Molnar
fix: net/ipv4/route.c: In function 'ip_static_sysctl_init': net/ipv4/route.c:3225: error: 'ipv4_route_path' undeclared (first use in this function) net/ipv4/route.c:3225: error: (Each undeclared identifier is reported only once net/ipv4/route.c:3225: error: for each function it appears in.) net/ipv4/route.c:3225: error: 'ipv4_route_table' undeclared (first use in this function) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31tcp: MD5: Fix MD5 signatures on certain ACK packetsAdam Langley
I noticed, looking at tcpdumps, that timewait ACKs were getting sent with an incorrect MD5 signature when signatures were enabled. I broke this in 49a72dfb8814c2d65bd9f8c9c6daf6395a1ec58d ("tcp: Fix MD5 signatures for non-linear skbs"). I didn't take into account that the skb passed to tcp_*_send_ack was the inbound packet, thus the source and dest addresses need to be swapped when calculating the MD5 pseudoheader. Signed-off-by: Adam Langley <agl@imperialviolet.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31ipv6: Fix ip6_xmit to send fragments if ipfragok is trueWei Yongjun
SCTP used ip6_xmit() to send fragments after received ICMP packet too big message. But while send packet used ip6_xmit, the skb->local_df is not initialized. So when skb if enter ip6_fragment(), the following code will discard the skb. ip6_fragment(...) { if (!skb->local_df) { ... return -EMSGSIZE; } ... } SCTP do the following step: 1. send packet ip6_xmit(skb, ipfragok=0) 2. received ICMP packet too big message 3. if PMTUD_ENABLE: ip6_xmit(skb, ipfragok=1) This patch fixed the problem by set local_df if ipfragok is true. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31ipvs: Move userspace definitions to include/linux/ip_vs.hJulius Volz
Current versions of ipvsadm include "/usr/src/linux/include/net/ip_vs.h" directly. This file also contains kernel-only definitions. Normally, public definitions should live in include/linux, so this patch moves the definitions shared with userspace to a new file, "include/linux/ip_vs.h". This also removes the unused NFC_IPVS_PROPERTY bitmask, which was once used to point into skb->nfcache. To make old ipvsadms still compile with this, the old header file includes the new one. Thanks to Dave Miller and Horms for noting/adding the missing Kbuild entry for the new header file. Signed-off-by: Julius Volz <juliusv@google.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netdev: Fix lockdep warnings in multiqueue configurations.David S. Miller
When support for multiple TX queues were added, the netif_tx_lock() routines we converted to iterate over all TX queues and grab each queue's spinlock. This causes heartburn for lockdep and it's not a healthy thing to do with lots of TX queues anyways. So modify this to use a top-level lock and a "frozen" state for the individual TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netfilter: xt_hashlimit: fix race between htable_destroy and htable_gcPavel Emelyanov
Deleting a timer with del_timer doesn't guarantee, that the timer function is not running at the moment of deletion. Thus in the xt_hashlimit case we can get into a ticklish situation when the htable_gc rearms the timer back and we'll actually delete an entry with a pending timer. Fix it with using del_timer_sync(). AFAIK del_timer_sync checks for the timer to be pending by itself, so I remove the check. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulationsPavel Emelyanov
The thing is that recent_mt_destroy first flushes the entries from table with the recent_table_flush and only *after* this removes the proc file, corresponding to that table. Thus, if we manage to write to this file the '+XXX' command we will leak some entries. If we manage to write there a 'clean' command we'll race in two recent_table_flush flows, since the recent_mt_destroy calls this outside the recent_lock. The proper solution as I see it is to remove the proc file first and then go on with flushing the table. This flushing becomes safe w/o the lock, since the table is already inaccessible from the outside. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledgedPatrick McHardy
In order to time out dead connections quicker, keep track of outstanding data and cap the timeout. Suggested by Herbert Xu. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30irda: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30nsc-ircc: default to dongle type 9 on IBM hardwareMatthew Garrett
This is necessary to set the dongle type on the nsc driver in order to get it to work correctly. Thinkpads all appear to use dongle type 9. This patch defaults nsc devices with an IBM PnP descriptor to use type 9. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Ben Collins <ben.collins@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-30bluetooth: add quirks for a few hci_usb devicesMichael Frey
Preface: The "Broadcom" device is on unreleased hardware, so I can't disclose the actual model. When the Dell 370 and 410 BT adapters are put into BT radio mode, they need to be prepared like many other Broadcom adapters. Also, add quirk Broadcom 2046 devices with HCI_RESET. Reference for this bug: https://launchpad.net/bugs/249448 Signed-off-by: Michael Frey <michael.frey@canonical.com> Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Ben Collins <ben.collins@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30hysdn: remove the packed attribute from PofTimStamp_tagDavid Howells
Remove the packed attribute from PofTimStamp_tag in the hysdn driver as the thing being packed is just an array of chars and so is unpackable. This deals with a compiler warning: In file included from drivers/isdn/hysdn/hysdn_boot.c:19: drivers/isdn/hysdn/hysdn_pof.h:63: warning: 'packed' attribute ignored for field of type 'unsigned char[40]' Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30isdn: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30tg3: adapt tg3 to use reworked PCI PM codeRafael J. Wysocki
Adapt the tg3 driver to use the reworked PCI PM and make it use the exported PCI PM core functions instead of accessing the PCI PM registers directly by itself. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30atm: fix direct casts of pointers to u32 in the InterPhase driverDavid Howells
Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30atm: fix const assignment/discard warnings in the ATM networking driverDavid Howells
Fix const assignment/discard warnings in the ATM networking driver. The lane2_assoc_ind() function needed its arguments changing to match changes in the lane2_ops struct (patch 61c33e012964ce358b42d2a1e9cd309af5dab02b "atm: use const where reasonable"). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30net: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30random32: seeding improvementStephen Hemminger
The rationale is: * use u32 consistently * no need to do LCG on values from (better) get_random_bytes * use more data from get_random_bytes for secondary seeding * don't reduce state space on srandom32() * enforce state variable initialization restrictions Note: the second paper has a version of random32() with even longer period and a version of random64() if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-30bridge: send correct MTU value in PMTU (revised)Simon Wunderlich
When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-30drivers/net/ehea/ehea_main.c: Release mutex in error handling codeJulia Lawall
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30sh_eth: Add support of SH7763 to sh_ethNobuhiro Iwamatsu
SH7763 has Ethernet core same as SH7710/SH7712. Positions of some registry are different, but the basic part is the same. I add support of ethernet of sh7763 to sh_eth. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30fix NE2000 linkage errorMikael Pettersson
Trying to build with CONFIG_NE2000=m fails with: scripts/mod/modpost -o /tmp/tmp/linux-2.6.27-rc1/Module.symvers -S -s ERROR: "NS8390_init" [drivers/net/ne.ko] undefined! This is because the split of 8390 into pausing and non-pausing versions was incompletely propagated to ne.c. This fixes it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30net: Make "networking" one-click deselectable.Robert P. J. Day
Use a menuconfig directive to make all of networking support one-click deselectable from the top-level menu. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30ipv6: Fix useless proc net sockstat6 removalDaniel Lezcano
This call is no longer needed, sockstat6 is per namespace so it is removed at the namespace subsystem destruction. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30tcp: MD5: Use MIB counter instead of warning for MD5 mismatch.David S. Miller
From a report by Matti Aarnio, and preliminary patch by Adam Langley. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30pkt_sched: Fix OOPS on ingress qdisc add.David S. Miller
Bug report from Steven Jan Springl: Issuing the following command causes a kernel oops: tc qdisc add dev eth0 handle ffff: ingress The problem mostly stems from all of the special case handling of ingress qdiscs. So, to fix this, do the grafting operation the same way we do for TX qdiscs. Which means that dev_activate() and dev_deactivate() now do the "qdisc_sleeping <--> qdisc" transitions on dev->rx_queue too. Future simplifications are possible now, mainly because it is impossible for dev_queue->{qdisc,qdisc_sleeping} to be NULL. There are NULL checks all over to handle the ingress qdisc special case that used to exist before this commit. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30[netdrvr] wd: fix build breakage with new NS8390p APIAlan Cox
From: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30dm9601: don't do usb transfers of data on stackPeter Korsgaard
dm_{read,write}() were doing USB transfers of data on stack, which isn't allowed. Fix it by kmalloc'ing a temporary buffer. Clean up the error handling for short transfers while we're at it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29niu: Fix error checking in niu_ethflow_to_class.Andreas Schwab
The callers of niu_ethflow_to_class expect zero as error, but it returns -1 instead. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-29IPv6: datagram_send_ctl() should exit immediately when an error occuredMiao Xie
When an error occured, datagram_send_ctl() should exit immediately rather than continue to run the for loop. Otherwise, the variable err might be changed and the error might be hidden. Fix this bug by using "goto" instead of "break". Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-07-29S2io: fix statistics flush after a MTU changeBreno Leitao
On s2io driver, when you change the interface MTU, it invokes a card reset, which flush some statistics. This patch solves this problem, and also set the net_device->stats as the default statistics structure, instead of s2io_nic->stats. To do that, s2io_nic->stats turned into a staging area, where is saved statistics of the last hardware statistics query. So, the difference between the current hardware statistics and s2io_nic->stats, is the value that should be summed up, in order to get the correct statistics value, even after a reset. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29enc28j60: don't specify (wrong) IRQ typeDavid Brownell
Recent changes to the IRQ framework have made passing the wrong trigger type to request_irq() become a fatal error. In the case of the enc28j60 driver, it stopped working in my test harness. (Specifically: the signal detects "pin change" events, both edges, not just falling edges. Similarly, other boards might route it through an inverter. Trigger type are board-specific.) This fixes that problem by the usual fix of expecting board setup code to have set up the correct IRQ trigger type. The best known example of that being x86 setup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29blackfin_mac: unneeded assignmentStephen Hemminger
skb->dev is set by eth_type_trans already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29Merge branch 'for-2.6.27' of git://git.marvell.com/mv643xx_eth into ↵Jeff Garzik
upstream-fixes
2008-07-29cxgb3: Allow 64KB firmware images.Steve Wise
Starting with FW version 7.0, the driver needs to allow larger images. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29Blackfin EMAC Driver: Functional power management supportMichael Hennerich
Reprogram MAC address after resume from Suspend Mem (Blackfin Hibernate looses all CORE and SYSTEM register content) Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29Blackfin EMAC Driver: enable TXDWA new feature for new silicon (rev > 0.2)Bryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 10:54:32 +0000