aboutsummaryrefslogtreecommitdiff
path: root/Documentation/kernel-parameters.txt
AgeCommit message (Collapse)Author
2005-10-29[PATCH] mm: m68k kill stram swapHugh Dickins
Please, please now delete the Atari CONFIG_STRAM_SWAP code. It may be excellent and ingenious code, but its reference to swap_vfsmnt betrays that it hasn't been built since 2.5.1 (four years old come December), it's delving deep into matters which are the preserve of core mm code, its only purpose is to give the more conscientious mm guys an anxiety attack from time to time; yet we keep on breaking it more and more. If you want to use RAM for swap, then if the MTD driver does not already provide just what you need, I'm sure David could be persuaded to add the extra. But you'd also like to be able to allocate extents of that swap for other use: we can give you a core interface for that if you need. But unbuilt for four years suggests to me that there's no need at all. I cannot swear the patch below won't break your build, but believe so. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28[PATCH] USB: Always do usb-handoffAlan Stern
This revised patch (as586b) makes usb-handoff permanently true and no longer a kernel boot parameter. It also removes the piix3_usb quirk code; that was nothing more than an early version of the USB handoff code (written at a time when Intel's PIIX3 was about the only motherboard with USB support). And it adds identifiers for the three PCI USB controller classes to pci_ids.h. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-23[PATCH] kernel-parameters cleanupRandy Dunlap
Fix typos & trailing whitespace. Add blank lines in a few places. Remove "AM53C974=" option: driver does not exist. Restrict to < 80 columns in most places (but don't split formatted command-line arguments). Add a few option arguments for completeness. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12[PATCH] x86-64: i386/x86-64: Fix time going twice as fast problem on ATI ↵Chuck Ebbert
Xpress chipsets Original patch from Bertro Simul This is probably still not quite correct, but seems to be the best solution so far. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09Manual merge with LinusDmitry Torokhov
2005-09-07[PATCH] Add rdinit parameter to pick early userspace initOlof Johansson
Since early userspace was added, there's no way to override which init to run from it. Some people tack on an extra cpio archive with a link from /init depending on what they want to run, but that's sometimes impractical. Changing the "init=" to also override the early userspace isn't feasible, since it is still used to indicate what init to run from disk when early userspace has completed doing whatever it's doing (i.e. load filesystem modules and drivers). Instead, introduce "rdinit=" and make it override the default "/init" if specified. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04Input: i8042 - add i8042.nokbd module option to allow supressingDmitry Torokhov
creation of keyboard port. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-08-15Merge ../to-linus-stable/Len Brown
2005-08-15[ACPI] re-enable platform-specific hotkey drivers by defaultLuming Yu
When both platform-specific and generic drivers exist, enable generic over-ride with "acpi_generic_hotkey". http://bugzilla.kernel.org/show_bug.cgi?id=4953 Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12[PATCH] Documentation/kernel-parameters.txt: fix a typoAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] DocumentationBob Picco
This is a small documentation patch for a boot time parameter. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29Remove duplicate mention of "edd" in Documentation/kernel-parameters.txtLinus Torvalds
2005-06-28[PATCH] irqpollAlan Cox
Anyone reporting a stuck IRQ should try these options. Its effectiveness varies we've found in the Fedora case. Quite a few systems with misdescribed IRQ routing just work when you use irqpoll. It also fixes up the VIA systems although thats now fixed with the VIA quirk (which we could just make default as its what Redmond OS does but Linus didn't like it historically). A small number of systems have jammed IRQ sources or misdescribes that cause an IRQ that we have no handler registered anywhere for. In those cases it doesn't help. Signed-off-by: Alan Cox <number6@the-village.bc.nu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Greg KH
2005-06-27[PATCH] PCI Allow OutOfRange PIRQ table addressjayalk@intworks.biz
I updated this to remove unnecessary variable initialization, make check_routing be inline only and not __init, switch to strtoul, and formatting fixes as per Randy Dunlap's recommendations. I updated this to change pirq_table_addr to a long, and to add a warning msg if the PIRQ table wasn't found at the specified address, as per thread with Matthew Wilcox. In our hardware situation, the BIOS is unable to store or generate it's PIRQ table in the F0000h-100000h standard range. This patch adds a pci kernel parameter, pirqaddr to allow the bootloader (or BIOS based loader) to inform the kernel where the PIRQ table got stored. A beneficial side-effect is that, if one's BIOS uses a static address each time for it's PIRQ table, then pirqaddr can be used to avoid the $pirq search through that address block each time at boot for normal PIRQ BIOSes. Signed-off-by: Jaya Kumar <jayalk@intworks.biz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input.git manuallyLinus Torvalds
Some manual fixups required due to clashes with the PF_FREEZE cleanups.
2005-06-25[PATCH] Retrieve elfcorehdr address from command lineVivek Goyal
This patch adds support for retrieving the address of elf core header if one is passed in command line. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] kexec: add kexec syscallsEric W. Biederman
This patch introduces the architecture independent implementation the sys_kexec_load, the compat_sys_kexec_load system calls. Kexec on panic support has been integrated into the core patch and is relatively clean. In addition the hopefully architecture independent option crashkernel=size@location has been docuemented. It's purpose is to reserve space for the panic kernel to live, and where no DMA transfer will ever be setup to access. Signed-off-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] I8K: use standard DMI interfaceDmitry Torokhov
I8K: Change to use stock dmi infrastructure instead of homegrown parsing code. The driver now requires box's DMI data to match list of supported models so driver can be safely compiled-in by default without fear of it poking into random SMM BIOS code. DMI checks can be ignored with i8k.ignore_dmi option. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-29Input: Add Fujitsu Lifebook B-series touchscreen driver.Kenan Esau
From: Kenan Esau <kenan.esau@conan.de> Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!