aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-12NUC900 LCD Controller DriverWang Qiang
An LCD controller driver for nuc900s. The Linux LOGO is just fine and the FB-Test application was ok, too. Signed-off-by: Wang Qiang <rurality.linux@gmail.com> Cc: Wang Zongshun <mcuos.com@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits) USB: backlight, appledisplay: fix incomplete registration failure handling USB: pl2303: remove unnecessary reset of usb_device in urbs USB: ftdi_sio: remove obsolete check in unthrottle USB: ftdi_sio: remove unused tx_bytes counter USB: qcaux: driver for auxiliary serial ports on Qualcomm devices USB: pl2303: initial TIOCGSERIAL support USB: option: add Longcheer/Longsung vendor ID USB: fix I2C API usage in ohci-pnx4008. USB: usbmon: mask seconds properly in text API USB: sisusbvga: no unnecessary GFP_ATOMIC USB: storage: onetouch: unnecessary GFP_ATOMIC USB: serial: ftdi: add CONTEC vendor and product id USB: remove references to port->port.count from the serial drivers USB: tty: Prune uses of tty_request_room in the USB layer USB: tty: Add a function to insert a string of characters with the same flag USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration() USB: tty: kill request_room for USB ACM class USB: tty: sort out the request_room handling for whiteheat USB: storage: fix misplaced parenthesis USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers ...
2010-03-02Merge branch 'for-rmk/samsung5' of git://git.fluff.org/bjdooks/linux into ↵Russell King
devel-stable Conflicts: arch/arm/Kconfig arch/arm/Makefile
2010-03-02Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into ↵Russell King
devel-stable Conflicts: arch/arm/Kconfig
2010-03-02Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable Conflicts: arch/arm/Makefile
2010-03-02arm: defconfig: rx51: enable phonet and g_nokiaFelipe Balbi
trivial patch enabling g_nokia on rx51_defconfig. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02[ARM] mmp: add default configuration for MMP2Haojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] mmp: update pxa168_defconfig and include avengers lite supportHaojian Zhuang
Signed-off-by: Gavin Gu <gavin.gu@marvell.com> Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Jack Ren <jack.ren@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa/imote2: Add defconfig for the imote2 platform.Stefan Schmidt
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-01Merge with mainline to remove plat-omap/Kconfig conflictTony Lindgren
Conflicts: arch/arm/plat-omap/Kconfig
2010-02-25AM3517 EVM: Enable I2C supportSriram
There are multiple devices connected to I2C bus on AM3517EVM (for instance audio codec, IO expander etc). Enable I2C support in the default kernel configuration for AM3517 EVM. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25AM35x: Enable OMAP_MUX in defconfigAjay Kumar Gupta
Enabling OMAP_MUX in defconfig as it is required for EHCI to work. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25Zoom3: Defconfig updatemanjugk manjugk
Some of the features are not enabled by default in zoom3 defconfig. This patch enables: - MMC Resume - TWL4030 RTC driver - Debug File system Build and boot tested on Zoom3 board. Signed-off-by: Manjunatha GK <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25Merge branch 'misc2' into develRussell King
2010-02-25Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', ↵Russell King
'pending-dma-streaming', 'u300' and 'umc' into devel
2010-02-25Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King
2010-02-24Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linusTony Lindgren
2010-02-24OMAP4: clock: Remove clock hacks from timer-gp.cSantosh Shilimkar
Now the omap4 clock framework is in mainline and clk_get_rate() is functional. Hence reomve the hardcoded clock hacks. This patch also fixes Division by zero in kernel. Backtrace: [<c0025fb8>] (dump_backtrace+0x0/0x110) from [<c017febc>] (dump_stack+0x18/0x1c) r7:60000093 r6:c0641050 r5:c0223e78 r4:c02126b4 [<c017fea4>] (dump_stack+0x0/0x1c) from [<c00260fc>] (__div0+0x18/0x20) [<c00260e4>] (__div0+0x0/0x20) from [<c01431fc>] (Ldiv0+0x8/0x10) [<c00318d4>] (omap_dm_timer_stop+0x0/0xb0) from [<c002c148>] (omap2_gp_timer_set_mode+0x1c/0x68) r5:c0223e78 r4:00000000 [<c002c12c>] (omap2_gp_timer_set_mode+0x0/0x68) from [<c0063270>] (clockevents_set_mode+0x30/0x64) r5:c020cae0 r4:00000000 [<c0063240>] (clockevents_set_mode+0x0/0x64) from [<c00632fc>] (clockevents_exchange_device+0x30/0x9c) r5:c020cae0 r4:c02146e0 [<c00632cc>] (clockevents_exchange_device+0x0/0x9c) from [<c00636e0>] (tick_notify+0x17c/0x404) r7:00000000 r6:c0641050 r5:00000000 r4:c020cae0 [<c0063564>] (tick_notify+0x0/0x404) from [<c005d5fc>] (notifier_call_chain+0x34/0x78) [<c005d5c8>] (notifier_call_chain+0x0/0x78) from [<c005d684>] (__raw_notifier_call_chain+0x1c/0x24) [<c005d668>] (__raw_notifier_call_chain+0x0/0x24) from [<c005d6ac>] (raw_notifier_call_chain+0x20/0x28) [<c005d68c>] (raw_notifier_call_chain+0x0/0x28) from [<c0062e78>] (clockevents_do_notify+0x1c/0x24) [<c0062e5c>] (clockevents_do_notify+0x0/0x24) from [<c0062f18>] (clockevents_register_device+0x98/0xd0) [<c0062e80>] (clockevents_register_device+0x0/0xd0) from [<c001a194>] (percpu_timer_setup+0x80/0x9c) r7:00000000 r6:00000002 r5:00000002 r4:00000003 [<c001a114>] (percpu_timer_setup+0x0/0x9c) from [<c000e9f0>] (smp_prepare_cpus+0xb0/0xe8) [<c000e940>] (smp_prepare_cpus+0x0/0xe8) from [<c00084e8>] (kernel_init+0x5c/0x1fc) r7:00000000 r6:00000000 r5:00000000 r4:c001b8a4 [<c000848c>] (kernel_init+0x0/0x1fc) from [<c0046c50>] (do_exit+0x0/0x604) r7:00000000 r6:00000000 r5:00000000 r4:00000000 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24ARM: S5PV210: Add S5PC110 configuration fileKukjin Kim
This patch adds S5PC110 default configuration file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24ARM: S5PV210: Add S5PV210 configuration fileKukjin Kim
This patch adds S5PV210 default configuration file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24ARM: S5P6442: Add S5P6442 configuration fileKukjin Kim
This patch adds S5P6442 default configuration file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-23[ARM] MV78xx0: Support for Buffalo WXL (Terastation Duo)Sebastien Requiem
* Modification of Kconfig to add the Option * 1 new file : buffalo-wxl-setup.c This file is inspired from the db-78xx0-setup.c already present. The following is done: - Configure MPP Lines for the plateform (see my patch for MPP) This is taken from the stock kernel provided by buffalotech (the vendor) - GigaBit Ethernet - Sata - Uart are initiallized in a different way than on the dev board as we have one core only. - USB The kernel has been running for some days now on my plateform. Signed-off-by: Sebastien Requiem <sebastien@kolios.dk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-19OMAP3EVM: PM: Update defconfigSanjeev Premi
This patch updates the omap3_evm_defconfig to select these options: * CONFIG_PM_DEBUG * CONFIG_DEBUG_FS * CONFIG_OMAP_SMARTREFLEX Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19Add devkit8000_defconfigThomas Weber
This patch adds a default config for the Timll Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19omap3: Update defconfig for IGEP v2 to allow new drivers andfeaturesEnric Balletbo i Serra
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: pandora: update defconfigGrazvydas Ignotas
Enable DSS2 and update defconfig for current kernel. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15ARM: 5920/1: OMAP4: Enable L2 CacheSantosh Shilimkar
This patch enables L2 cache and associated Errata on the OMAP4430 SDP. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King
Conflicts: arch/arm/Makefile
2010-02-15omap_hsmmc: Move gpio and regulator control from board fileAdrian Hunter
This patch moves the setup code for GPIO's and Voltage Regulators from the board file mmc-twl4030.c to the driver omap_hsmmc.c. PBIAS and other system control configuration remains in the board file. Moving GPIO code to the driver makes the board initialisation code independent of when GPIO's are defined. That makes the board initialisation now entirely independent of its original twl4030 roots. Moving Voltage Regulator code to the driver allows for further development of regulator support in the core MMC code. It also permits the MMC core to be compiled as a module, because the board code no longer calls MMC core functions. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Add omap4 into omap3_defconfigTony Lindgren
Add omap4 into omap3_defconfig. Note that this does not yet boot on omap4, but boots on omap2 and omap3. Also note that CONFIG_SMP does not currently work on uniprocessor ARMs. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Update omap3_defconfig to build in all the 2420 based boardsTony Lindgren
Note that booting 2420 depends on another patch posted earlier to not select CONFIG_CPU_32v6K if CONFIG_ARCH_OMAP2 is selected. Also note that we cannot add omap2430 in yet because of the different clock addresses compared to 2420. Also note that we cannot have CONFIG_CPU_32v6K=y in order to boot on 24xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-09mxc: Add mx51_defconfigAmit Kucheria
This config is used to test the base support for i.MX51 processors on the Babbage board Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09ARM: mach-shmobile: early console support using earlyprintkMagnus Damm
Add support for early console to the SH-Mobile boards. Simply perform an early platform probe for "earlyprintk" to trigger the early serial console code in sh-sci.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08ARM: mach-shmobile: G3EVM, G4EVM and AP4EVB defconfigsMagnus Damm
Add defconfigs for G3EVM, G4EVM and AP4EVB. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05[ARM] orion5x: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-05[ARM] Kirkwood: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-05[ARM] Orion: Add Buffalo Linkstation LS-HGL supportZhu Qingsen
Signed-off-by: Zhu Qingsen <zhuqs@cn.fujitsu.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-01-27Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into ↵Russell King
devel-stable
2010-01-21ARM: S3C64XX: Update s3c6400_defconfig for current kernelBen Dooks
Update the s3c6400_defconfig with one from the current kernel which has been build and run tested on an SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: S3C6400: Update s3c6400_defconfig for bigger initrds for SMDK6410Ben Dooks
The Samsung initrd for SMDK6410 is now bigger than the original initrds that where used. Increase the command-line size and the size of the ramdisk that it is unpacked into. Also change the default init to /linuxrc to avoid problems with the current SMDK ramdisk image failing to run /bin/bash. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21ARM: SAMSUNG: Move pm-check.c to plat-samsungBen Dooks
Move the pm-check.c file to plat-samsung for all Samsung SoC users, and update Kconfig names to make them SAMSUNG_ instead of S3C2410_ Sed expresions used to make the change: s/S3C2410_PM_DEBUG/SAMSUNG_PM_DEBUG/g s/S3C2410_PM_CHECK/SAMSUNG_PM_CHECK/g Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-20ARM: 5851/1: [AT91] AT572D940HF-EK board supportAndrew Victor
Add support for the Atmel AT572D940HF-EK board (development board for the AT572D940HF processor). Signed-off-by: Antonio R. Costa <costa.antonior@gmail.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18ARM: SAMSUNG: Move S3C24XX ADC driver to plat-samsungMaurus Cuelenaere
Move S3C24XX ADC driver to plat-samsung Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S5P6440: Add configuration fileKukjin Kim
This patch adds Samsung's S5P6440 default configuration file. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-10Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable
2010-01-08ARM: 5867/1: Update U300 defconfigLinus Walleij
This updates the U300 defconfig to include the DMA driver merged in 2.6.33-rc1 and adds a codepage that's needed to mount VFAT MMC cards as default. The rest is new config options. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-08imx: remove mx1ads defconfigUwe Kleine-König
For some time now the defconfig for mx1ads produces a kernel for a versatile board. As CONFIG_ARCH_MX1ADS is included in the mx1 defconfig just get rid of mx1ads_defconfig. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de>
2010-01-05imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT platform"Uwe Kleine-König
Not using MACH_IMX27LITE makes machine_is_imx27lite always return 0 independent of building support for this machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:33:06 +0000