aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2009-08-24[ARM] Kirkwood: enable eSATA on QNAP TS-219PJohn Holland
Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware allowing the use of the discrete eSATA controller connected to the PCIe bus in the TS-219P. Signed-off-by: John Holland <john.holland@cellent-fs.de> Tested-by: Thomas Reitmayr <treitmayr@devbase.at> Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-10Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2009-08-10OMAP3: RX51: Updated rx51_defconfigRoger Quadros
Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots. Note that the regulator code should be moved from mmc-twl4030.c to omap_hsmmc.c so it can be a module. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-07USB: musb: fix the nop registration for OMAP3EVMGupta, Ajay Kumar
OMAP3EVM uses ISP1504 phy which doesn't require any programming and thus has to use NOP otg transceiver. Cleanups being done: - Remove unwanted code in usb-musb.c file - Register NOP in OMAP3EVM board file using usb_nop_xceiv_register(). - Select NOP_USB_XCEIV for OMAP3EVM boards. - Don't enable TWL4030_USB in omap3_evm_defconfig Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-28mx3 defconfig updateSascha Hauer
- enable PCM043, MX31LILLY, ARMADILLO5X0 and MX35_3DS boards - enable MXC nand driver - enable UBI support - disable cs89x0 support which broke all boards which do not have this chip Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-28mx27 defconfig updateSascha Hauer
- enable MX27_3DS and MX27LITE Board - enable MXC nand driver - enable UBI support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-17[ARM] 5608/1: Updated U300 defconfigLinus Walleij
Removed the LBD support that isn't of any use right now at least, then remove remnants of the TCM config flags that somehow crept in by mistake (not yet merged patch for 2.6.32) and then the usual defconfig noise from updated menus. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02[ARM] 5576/1: Update kb9202_defconfigMatthias Kaehlcke
The default configuration file for the KwikByte kb9202 board was based on a 2.6.13-rc2 kernel and doesn't produce a bootable kernel. Update the configuration in order to produce a bootable image. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02[ARM] 5579/1: Updated U300 defconfigLinus Walleij
This defconfig update selects all the new U300 drivers merged for 2.6.31-rc1 in the merge window and add defaults for the new config options. It compiles and boots nicely from initramfs on the U300. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-23[ARM] s3c2410_defconfig: add MINI2440 machine to buildBen Dooks
Add the MINI2440 to the list of machines built by the central defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-23[ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORTBen Dooks
Remove the unused CONFIG_DEBUG_S3C_PORT as we currently only have support for using the S3C UARTs via the low-level debug code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-15[ARM] MINI2440: Create a mini2440_defconfig fileMichel Pollet
Just a working, starting point config file for the board. Signed-off-by: Michel Pollet <buserror@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-14Merge branch 'u300' into develRussell King
Conflicts: arch/arm/Makefile Updates: arch/arm/mach-u300/core.c arch/arm/mach-u300/timer.c
2009-06-14Merge branch 'stmp' into develRussell King
2009-06-14Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-11Merge branch 'w90x900' into develRussell King
2009-06-11[ARM] 5550/1: Add default configure file for w90p910 platformwanzongshun
Add default configure file for w90p910 platform. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-10Merge branch 'ep93xx' into develRussell King
2009-06-10Merge branch 'for_rmk' of ↵Russell King
git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel
2009-06-09ARM: OMAP4: SMP: Update defconfig for OMAP4430Santosh Shilimkar
This patch updates omap_4430sdp_defconfig to add SMP and LOCAL_TIMER support for OMAP4430 SDP platform. Additionally the defconfig is made in sync with 2.6.30-rc7 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2009-06-08Merge branch 'for-rmk' of git://git.marvell.com/orion into develRussell King
2009-06-08[ARM] Kirkwood: add Marvell 88F6281 GTW GE board supportLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2009-06-08[ARM] Kirkwood: CPU idle driverRabeeh Khoury
The patch adds support for Kirkwood cpu idle. Two idle states are defined: 1. Wait-for-interrupt (replacing default kirkwood wfi) 2. Wait-for-interrupt and DDR self refresh Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-05[ARM] pxa/cm-x300: update defconfigMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: magician_defconfig enable hx4700, asic3 and w100fbPhilipp Zabel
I'm not going to maintain separate defconfigs for magician and hx4700. This should probably be renamed to htcpxa_defconfig. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-03[ARM] orion: add hwrng timeriomem hook to TS-78xxAlexander Clouter
Add hook so that the HW RNG source on the TS-78xx is available. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-01[ARM] 5533/1: Add U300 series defconfigLinus Walleij
This adds a defconfig for the U300 series ST-Ericsson mobile platforms. It will be maintained to enable the maximum set of drivers so as to provide a good regression testing target for these platforms. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel Conflicts: arch/arm/Makefile
2009-05-29Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel
2009-05-28davinci: defconfig update: add EMACKevin Hilman
DaVinci EMAC driver is now upstream. Enable it in default defconfig. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28ARM: OMAP4: Add defconfig for 4430 SDPSantosh Shilimkar
This patch adds the defconfig for OMAP4430 SDP platform. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP3: Add omap3 EVM defconfigSyed Mohammed Khasim
Add omap3 EVM defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP3: Defconfig for Zoom2 boardVikram Pandita
This patch adds OMAP3 Zoom2 board defconfig. Signed-off-by: Mikkel Christensen <mlc@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP2/3: Add generic onenand support when connected to GPMCJuha Yrjola
Add generic onenand support when connected to GPMC and make the boards to use it. The patch has been modified to make it more generic to support all the boards with GPMC. The patch also remove unused prototype for omap2_onenand_rephase(void). Note that board-apollon.c is currently using the MTD_ONENAND_GENERIC and setting the GPMC timings in the bootloader. Setting the GPMC timings in the bootloader will not allow supporting frequency scaling for the onenand source clock. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-26davinci: update davinci_all_defconfig for dm355, dm6467Kevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-24[ARM] 5523/2: Updated ep93xx defconfigRyan Mallon
Updated defconfig for ep93xx. By default, support for all boards which boot from 0x00000000 (SDCE3/SyncBoot) is included. Also updated the defconfig to use EABI for building the kernel. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-23Merge branch 'ixp4xx' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel
2009-05-07MXC: mx2_defconfig fileIvo Clarysse
Adds a defconfig file for the i.MX21 SoC, targeting the Freescale i.MX21ADS (M9328MX21ADSE) Application Development System. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2009-05-05Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2009-05-05i.MX31: Disable CPU_32v6K in mx3_defconfig.Magnus Lilja
The i.MX31 ARM11 core is not a v6K core. Disable this option as it is incompatible with non v6K cores. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mx31: remove mx31moboard_defconfigValentin Longchamp
We want to have a mx31_defconfig file that builds a kernel that is able to boot on all support mx31 systems and thus also can be better tested by automatic build scripts. For these reasons, this config file is not needed anymore. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-04[ARM] mv78xx0: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04[ARM] orion5x: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-04[ARM] Kirkwood: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-04-28Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-04-27[ARM] 5463/1: Freescale STMP platform support [10/10]dmitry pervushin
Default configs for STMP3xxx boards Signed-off-by: dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-27[ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbolPhilipp Zabel
cpufreq drivers for pxa2xx/3xx are now built-in automatically as soon as CPU_FREQ is enabled. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-23davinci: add default Kconfig, add HAVE_IDEKevin Hilman
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-04-17Merge branch 'defconfig-s3c2410' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King