aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx3
AgeCommit message (Collapse)Author
2009-03-13mx31moboard: use of new iomux implementationValentin Longchamp
This example takes advantage of the possibility to use tables of iomux configs. This is inspired from mx1-mx2 iomux code. It allows a better code readability. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31: rework of iomux supportValentin Longchamp
This new implemenatation avoids that two physical pins are claimed by the same driver (also with the the gpr hardware modes). The gpio kernel lib is also called when a capable gpio pin is assigned its gpio function. The mxc_iomux_mode function is still here for backward compatibility but should not be used anymore. V2: In the precendent revision, the iomux code was claiming a pin when its hardware mode was changed. This was uncorrect: when the hardware mode is changed, the pin must still be claimed through the iomux. In order to have a pin working in mode hw2, we must fist issue the mxc_iomux_set_gpr call and then the corresponding mxc_iomux_mode calls with the FUNC mode (usually done with mxc_iomux_setup_multiple_pins). The reverse calls must be done to fee the pins. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31ads: Make unexported data staticMark Brown
Keeps sparse happy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31: Add device definitions for the i.MX3x I2C controllersMark Brown
The i.MX I2C driver has not yet been merged into mainline but it is near to that and the device defintions don't depend directly on it so we can add the devices now. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: remove _clk suffix from clock namesSascha Hauer
The context makes it clear already that these are clocks, so there's no need for such a suffix. This patch only changes the clocks actually used in the tree. The remaining clocks are renamed in the subsequent architecture specific patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: rework timer/clock initialisationSascha Hauer
- rename mxc_clocks_init to architecture specific versions. This allows us to have more than one architecture compiled in. - call mxc_timer_init from clock initialisation instead from board code Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: Use a single function for decoding a PLLSascha Hauer
We had 3 versions of this function in clock support for MX1/2/3 Use a single one instead. I picked the one from the MX3 as it seems to calculate more accurate as the other ones. Also, on MX27 and MX31 mfn can be negative, this hasn't been handled correctly on MX27 since now. This patch has been tested on MX27 and MX31 and produces the same clock frequencies for me. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-08[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, ↵Russell King
pxa, s3c arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-18[ARM] MXC: do not include mach/hardware.h from mach/memory.hSascha Hauer
Instead of including other header files, define PHYS_OFFSET directly Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-18[ARM] MXC: remove dependency to other include files from irqs.hSascha Hauer
This patch removes the inclusion of mach/hardware.h from mach/irqs.h and switches to more meaningful names for the irq related macros. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX31: basic support for mx31moboard platformValentin Longchamp
Initial support for mx31moboard platfor with 3 serial ports and NOR Flash Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] pcm037: add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] MX3: add NAND supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16Add basic support for MX31PDK board.Fabio Estevam
Add basic support to the MX31PDK development board, also known as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] pcm037: Add support for SRAM deviceSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16[ARM] pcm037: add support for the on-board LAN9217 network controllerGuennadi Liakhovetski
smc911x now also supports LAN921{5,7,8} network controllers. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16i.MX31: fix mxc_iomux_set_pad()Guennadi Liakhovetski
mxc_iomux_set_pad() is buggy on i.MX31 - it calculates the register and the offset therein wrongly. Fix it. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-14[ARM] pcm037: add 1wire supportSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] MX31: add w1 platform_device and resourcesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] mx31ads: Add missing includeSascha Hauer
mx31ads_defconfig compilation failed with arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart': arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function) arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.) make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1 Add missing include Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] pcm037: map AIPS1 and AIPS2 as nonshared areaSascha Hauer
The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-09Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.gitRussell King
Merge branch 'davinci' into devel
2008-10-09Merge branch 'for-rmk' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git Merge branch 'imx-devel' into devel
2008-10-01[ARM] Remove MT_NONSHARED_DEVICE aliasRussell King
Use MT_DEVICE_NONSHARED instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09i.MX3: Fix compiler warningsLuotao Fu
Fix some base address declaration by adding a cast. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09i.MX31ADS: Add CPLD interrupts demultiplexing (take 3).Gilles Chanteperdrix
Needed for 8250 serial port and CS89x0 ethernet interface. Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09i.MX31ADS: Enable the first IMX serial port. (take 3)Gilles Chanteperdrix
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09i.MX3: make SoC devices globally availableSascha Hauer
Make SoC devices globally available to boards rather than using a device specific init function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-02pcm037: add rts/cts support for serial portSascha Hauer
We have rts/cts pins on the first serial port on the pcm037. Enable it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-05MX3: Adapt mx31lite to new timer init styleJuergen Beisert
This patch converts the external "add_mx31lite-basic_defconfig.diff" to our MXC implementation. Note: This patch fixes a board reference only. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX3: Add basic support for LogicPD i.MX31 LiteKitDaniel Mack
This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack <daniel@caiaq.de> -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+)
2008-07-05MX31: add basic pcm037 board supportSascha Hauer
This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MXC family: Adding timer supportJuergen Beisert
This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC: add io multiplexing functions for mx3Sascha Hauer
This patch adds functions to use the io multiplexer on mx3 platforms. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC arch: Add gpio support for the whole platformJuergen Beisert
This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Daniel Mack <daniel@caiaq.de>
2008-07-05mxc: add MX3 support for i.MX internal UART driverSascha Hauer
This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX3: introduce clock APISascha Hauer
This patch introduces the clock API for for arch-mxc Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC: do not include board specific header from architecture includeSascha Hauer
do not include board-mx31ads.h from hardware.h, instead include it directly only where needed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-01-28[ARM] Fix timer damage from d3d74453c34f8fd87674a8cf5b8a327c68f22e99Russell King
Move the xtime write mode seqlock into timer_tick(), so it only surrounds the call to do_timer(). This avoids a deadlock in update_process_times() ... hrtimer_get_softirq_time() which tries to get a read mode seqlock on xtime, thereby preventing booting. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4461/1: MXC platform and i.MX31ADS core supportQuinn Jensen
This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-04 18:29:44 +0000