aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap1
AgeCommit message (Collapse)Author
2008-04-14ARM: OMAP2: Clean-up mux codeTony Lindgren
Misc clean-up for the mux code and remove some unnecessary ifdefs. Patch changes debug function so it can be used on both 24xx and 34xx. Changes are mostly for omap2, but patch also cleans up some omap1 and common mux code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: TimerMPU: Remove MPU-timer based sched_clock()Kevin Hilman
Remove MPU-timer based sched_clock() in favor of the common one based on 32k sync timer which works across all OMAP1/2/3 platforms. Using 32k based one also gives a valid sched_clock() very early in the boot process. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: TimerMPU: Remove unused cycles-to-nsec conversionsKevin Hilman
These are no longer used and similar conversions are provided by the clocksource/clockevent code. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP1: Timer32K: Fix timer32K for clockevents and clean it upTony Lindgren
This patch fixes timer32k for clockevents and syncs it with linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: Timer32K: Move timer32k to mach-omap1Kevin Hilman
Move now OMAP1-specific timer32k code to mach-omap1 since OMAP2/3 32k timers are done in gptimer code. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: Split omap_cfg_reg() into omap processor specific functionsTony Lindgren
Use omap processor specific function depending on system type. Based on an earlier patch by Klaus Pedersen <klaus.k.pedersen@nokia.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: Allow registering pin mux functionTony Lindgren
This patch changes pin multiplexing init to allow registering custom function. The omap_cfg_reg() func will be split into omap processor specific functions in later patch. This is done to make adding omap3 pin multiplexing easier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: Use gpiolib with tps65010 for OSK 5912David Brownell
Convert OSK board to use new tps65010 gpiolib support. This includes moving its LED support from leds-osk to gpio-leds, giving more trigger options and a net platform code shrink. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-04-14ARM: OMAP: 5912 OSK GPIO updatesDavid Brownell
Start cleaning up GPIO handling for OMAP5912 OSK board: - Initialize GPIOs using the cross-platform calls, not the old OMAP-private ones. - Move touchscreen setup out of ads7846 code into board-specfic setup code, where it belongs. This doesn't depend on the patches to update OMAP to use the gpiolib implementation framework. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP1: Fix typo in OMAP1 MPU clock source initializationWill Newton
Fix typo in OMAP1 MPU clock source initialization. Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix clockevent support for hrtimersKevin Hilman
One-shot mode was broken in MPU-timer support for OMAP1 due to a typo. Also, ensure timer is stopped before changing the auto-reload flag. The TRM says changing the AR flag when timer is running is undefined. Also set GENERIC_CLOCKEVENTS for all omaps. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-05ARM: OMAP1: omap1/pm.c build fixDavid Brownell
Build fix: arch/arm/mach-omap1/pm.c: In function 'omap_pm_init': arch/arm/mach-omap1/pm.c:720: warning: passing argument 2 of 'sysfs_create_file' from incompatible pointer type Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-05ARM: OMAP1: omap h2 regression fixDavid Brownell
H2 and H3 were broken on by e27a93a944a5ba6a0112750c8243abba86d56e94, which removed declarations for their tps6501x chips. This resolves that issue for the H2. (Note that this patch *also* broke the isp1301 support on H2; it presumed a not-yet-merged new-style I2c driver.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-05ARM: OMAP1: omap h3 regression and build fixDavid Brownell
Get rid of build warnings and errors in mainline for H3 boards; not all the H3 updates were correct, it seems like the OMAP1 boards are not getting proper build testing. Also, commit e27a93a944a5ba6a0112750c8243abba86d56e94 introduced a regression related to the tps65013 chip. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-24ARM: OMAP: Release i2c_adapter after use (Siemens SX1)Jean Delvare
Each call to i2c_get_adapter() must be followed by a call to i2c_put_adapter() to release the grabbed reference. Otherwise the reference count grows forever and the adapter can never be unregistered. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Vladimir Ananiev <vovan888@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Misc clean-upTony Lindgren
This patch cleans up omap1 files to sync up with linux-omap tree: - Remove omap-generic MMC config as it should be defined in board-*.c files instead of using board-generic.c - New style I2C board_info from David Brownell <dbrownell@users.sourceforge.net> - Init section fixes from Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Palm Tungsten E board clean-upAndrzej Zaborowski
Mostly gpio clean-up. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Use I2C bus registration helper for omap1Jarkko Nikula
This patch starts using introduced I2C bus registration helper by cleaning up registration currently done in various places and by doing necessary board file modifications. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Remove omap_sram_idle()Vivek Kutal
This patch removes omap_sram_idle() that is no longer used. The function called in pm_idle is omap_sram_suspend, omap_sram_idle() is not used anywhere in omap1. Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: PM fixes for OMAP1Vivek Kutal
This patch does the following: - Fixes the omap_pm_idle() code so that we enter WFI mode in idle. - /sys/power/sleep_while_idle is created only when 32k timer is used Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Use MMC multislot structures for Siemens SX1 boardCarlos Eduardo Aguiar
Use MMC multislot structures for Siemens SX1 board Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Make omap1 use MMC multislot structuresFelipe Balbi
Make omap1 use new MMC multislot structures. The related MMC patches will be sent separately. Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br> Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: David Cohen <david.cohen@indt.org.br> Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Change the comments to C styleDavid Cohen
Change the comments to C style Signed-off-by: David Cohen <david.cohen@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Make omap1 boards to use omap_nand_platform_dataTony Lindgren
This patch adds omap_nand_platform data based on a patch by Shahrom Sharif-Kashani <sshahrom@micron.com>, and makes omap1 boards to use omap_nand_platform_data instead of nand_platform_data used earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', ↵Russell King
's3c2410', 'sa1100' and 'vfp' into devel * at91: (24 commits) [ARM] 4615/4: sam926[13]ek buttons updated [ARM] 4765/1: [AT91] AT91CAP9A-DK board support [ARM] 4764/1: [AT91] AT91CAP9 core support [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation [ARM] 4761/1: [AT91] Board-support for NEW_LEDs [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 [ARM] 4759/1: [AT91] Buttons on CSB300 [ARM] 4758/1: [AT91] LEDs [ARM] 4757/1: [AT91] UART initialization [ARM] 4756/1: [AT91] Makefile cleanup [ARM] 4755/1: [AT91] NAND update [ARM] 4754/1: [AT91] SSC library support [ARM] 4753/1: [AT91] Use DMA_BIT_MASK [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY [ARM] 4646/1: AT91: configurable HZ, default to 128 [ARM] 4688/1: at91: speed-up irq processing [ARM] 4657/1: AT91: Header definition update ... * ep93xx: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups [ARM] 4668/1: ep93xx: implement new GPIO API * iop: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device [ARM] 4708/1: iop: update defconfigs for 2.6.24 * kprobes: ARM kprobes: let's enable it ARM kprobes: special hook for the kprobes breakpoint handler ARM kprobes: prevent some functions involved with kprobes from being probed ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack ARM kprobes: add the kprobes hook to the page fault handler ARM kprobes: core code ARM kprobes: instruction single-stepping support * ks8695: [ARM] 4603/1: KS8695: debugfs interface to view pin state [ARM] 4601/1: KS8695: PCI support * misc: [ARM] remove duplicate includes [ARM] CONFIG_DEBUG_STACK_USAGE [ARM] 4689/1: small comment wrap fix [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS [SERIAL] 21285: Report baud rate back via termios [ARM] Remove pointless casts from void pointers, [ARM] Misc minor interrupt handler cleanups [ARM] Remove at91_lcdc.h [ARM] ARRAY_SIZE() cleanup [ARM] Update mach-types * msm: [ARM] msm: dma support for MSM7X00A [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) [ARM] msm: irq and timer support for ARCH_MSM7X00A [ARM] msm: core platform support for ARCH_MSM7X00A * s3c2410: (33 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ... * sa1100: [ARM] sa1100: add clock source support * vfp: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support [ARM] 4583/1: ARMv7: Add VFPv3 support [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28[NET] smc91x: Make smc91x use IRQ resource trigger flagsRussell King
smc91x is shared between many different platforms. Each platform needs to specify the interrupt type, and in some cases the irq type depends on more than just the build configuration - it depends on runtime checks. Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide a way for these flags to be passed via the IRQ resource itself. Note that IRQF_TRIGGER_* constants are intentionally defined to correspond with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that the low bits of PCI iomem resources correspond with the BAR flag bits. Also provide a way to configure smc91x to read the IRQ flags from the resource. Once all platforms have been converted over (signified by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-27i2c/tps65010: move header to <linux/i2c/...>David Brownell
Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-26[ARM] remove duplicate includesLucas Woods
Signed-off-by: Lucas Woods <woodzy@gmail.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] Misc minor interrupt handler cleanupsJeff Garzik
mach-integrator/pci_v3.c: no need to reference 'irq' arg, its constant mach-omap1/pm.c: remove extra whitespace arch/arm/mach-sa1100/ssp.c: remove braces around single C stmt arch/arm/plat-omap/mcbsp.c: - remove pointless casts from void* - make longer lines more readable Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-24driver core: make /sys/power a kobjectGreg Kroah-Hartman
/sys/power should not be a kset, that's overkill. This patch renames it to power_kset and fixes up all usages of it in the tree. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kobject: convert arm/mach-omap1/pm.c to kobj_attr interfaceGreg Kroah-Hartman
This makes the code a bit simpler and and gets us one step closer to deleting the deprecated subsys_attr code. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Cliff Brake <cbrake@accelent.com> Cc: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24kset: convert /sys/power to use kset_createGreg Kroah-Hartman
Dynamically create the kset instead of declaring it statically. We also rename power_subsys to power_kset to catch all users of the variable and we properly export it so that people don't have to guess that it really is present in the system. The pseries code is wierd, why is it createing /sys/power if CONFIG_PM is disabled? Oh well, stupid big boxes ignoring config options... Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-18ARM: OMAP1: Fix compile for board-nokia770Daniel Walker
Fix compile for board-nokia770 Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-01-18ARM: OMAP1: Keymap fix for f-sample and p2-sampleVivek Kutal
Keymap fix for f-sample and p2-sample. Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-10-31[ARM] Fix omap_h2_1610_defconfig regressionsRussell King
Fix: arch/arm/mach-omap1/built-in.o: In function `h2_init': board-h2.c:(.init.text+0xbb4): undefined reference to `i2c_register_board_info' Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-18PM: Rework struct platform_suspend_opsRafael J. Wysocki
There is no reason why the .prepare() and .finish() methods in 'struct platform_suspend_ops' should take any arguments, since architectures don't use these methods' argument in any practically meaningful way (ie. either the target system sleep state is conveyed to the platform by .set_target(), or there is only one suspend state supported and it is indicated to the PM core by .valid(), or .prepare() and .finish() aren't defined at all).  There also is no reason why .finish() should return any result. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18PM: Rename struct pm_ops and related thingsRafael J. Wysocki
The name of 'struct pm_ops' suggests that it is related to the power management in general, but in fact it is only related to suspend.  Moreover, its name should indicate what this structure is used for, so it seems reasonable to change it to 'struct platform_suspend_ops'.  In that case, the name of the global variable of this type used by the PM core and the names of related functions should be changed accordingly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18PM: Move definition of struct pm_ops to suspend.hRafael J. Wysocki
Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
2007-10-13i2c/tps65010: New-style driver updates, part 2David Brownell
Switch the tps65010 driver into a "new-style" I2C driver, and convert all of its in-tree users (board support for OSK, H2, H3) accordingly. That accounts for most of the board-specific code in this driver; the rest of that code is now moved into board-specific initcalls. Also remove some of the many now-superfluous #includes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-10-12Merge branches 'omap1-upstream' and 'omap2-upstream' into develRussell King
2007-10-12[ARM] omap1/leds-innovator.c: remove dead codeAdrian Bunk
This patch removes dead code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-20ARM: OMAP: N770: add missing LCD, LCD controller, touchscreen device ↵Imre Deak
registration These were left out from the board file when merging these drivers, add them here. Call GPIO init from the board file as well, since the platform device init code uses the GPIO API. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Removed hwa742 init for now as it needs some clock updates. Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: osk+mistral backlight, power, board specificDavid Brownell
Mistral-specific: - Add PWL-driven LCD backlight device - Apply power to the board even when the LCD isn't configured; things like EEPROM, temperature sensor, and wakeup switch depend on it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: Sync board specific files with linux-omapTony Lindgren
This patch syncs omap board specific files with linux-omap tree. Patch consists mostly of driver updates done in linux-omap tree for drivers not yet in mainline kernel. Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: Basic support for siemens sx1Vladimir Ananiev
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: Palm Tungsten|T supportMarek Vasut
This patch adds board file and necessary includes for Palm Tungsten|T. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: Register tsc2102 on Palm Tungsten EAndrzej Zaborowski
Add palmte board config bits for TSC2102 controlled devices. This will enable touchscreen, audio and APM code to report battery level. If there are other boards at some point that use a TSC2102, similar code can be used. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>