aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/mcbsp.c
AgeCommit message (Collapse)Author
2009-09-14Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits) [ARM] Update mach-types ARM: 5636/1: Move vendor enum to AMBA include ARM: Fix pfn_valid() for sparse memory [ARM] orion5x: Add LaCie NAS 2Big Network support [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board ARM: 5689/1: Update default config of HP Jornada 700-series machines ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem ARM: 5688/1: ks8695_serial: disable_irq() lockup ARM: 5687/1: fix an oops with highmem ARM: 5684/1: Add nuc960 platform to w90x900 ARM: 5683/1: Add nuc950 platform to w90x900 ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver ARM: 5625/1: fix hard coded 4K resource size in amba bus detection MMC: MMCI: convert realview MMC to use gpiolib ARM: 5685/1: Make MMCI driver compile without gpiolib ARM: implement highpte ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ ... Fix up trivial conflict in arch/arm/kernel/signal.c. It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.
2009-09-12Merge branch 'devel-stable' into develRussell King
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-09-10Merge branch 'topic/asoc' into for-linusTakashi Iwai
* topic/asoc: (226 commits) ASoC: au1x: PSC-AC97 bugfixes ASoC: Fix WM835x Out4 capture enumeration ASoC: Remove unuused hw_read_t ASoC: fix pxa2xx-ac97.c breakage ASoC: Fully specify DC servo bits to update in wm_hubs ASoC: Debugged improper setting of PLL fields in WM8580 driver ASoC: new board driver to connect bfin-5xx with ad1836 codec ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI ASoC: davinci: i2c device creation moved into board files ASoC: Don't reconfigure WM8350 FLL if not needed ASoC: Fix s3c-i2s-v2 build ASoC: Make platform data optional for TLV320AIC3x ASoC: Add S3C24xx dependencies for Simtec machines ASoC: SDP3430: Fix TWL GPIO6 pin mux request ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI OMAP: McBSP: Use textual values in DMA operating mode sysfs files ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 ASoC: Select core DMA when building for S3C64xx ...
2009-08-20OMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5Peter Ujfalusi
Do not allow applications to use the full buffer found on McBSP1,3,4,5. Using the full buffer in threshold mode causes the McBSP buffer to run dry, which can be observed as channels are switching (in reality the channels are shifting). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Create and export max_(r|t)x_thres propertyEduardo Valentin
This patch export through sysfs two properties to configure maximum threshold for transmission and reception on each mcbsp instance. Also, it exports two helper functions to allow mcbsp users to read this values. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-28ARM: OMAP4: Add McBSP supportSyed Rafiuddin
This patch creates McBSP support on OMAP4430 development platform. This patch includes corresponding base address changes for OMAP4. Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
2009-07-25ARM: includecheck fix: mach-omap2/mcbsp.cJaswinder Singh Rajput
fix the following 'make includecheck' warning: arch/arm/mach-omap2/mcbsp.c: mach/irqs.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-11[ARM] remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/arm/mach-mx3/devices.c arch/arm/mach-omap1/mcbsp.c arch/arm/mach-omap2/mcbsp.c arch/arm/plat-stmp3xxx/pinmux.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-08[ARM] omap: mcbsp: convert to use fck/ick clocks directlyRussell King
Rather than introducing a special 'mcbsp_clk' with code behind it in mach-omap*/mcbsp.c to handle the SoC specifics, arrange for the mcbsp driver to be like any other driver. mcbsp requests its fck and ick clocks directly, and the SoC specific code deals with selecting the correct clock. There is one oddity to deal with - OMAP1 fiddles with the DSP clocks and DSP reset, so we move this to the two callback functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-29ARM: OMAP: Fix McBSP spin_lock deadlockStanley.Miao
A spin_lock deadlock will occur when omap_mcbsp_request() is invoked. omap_mcbsp_request() \- clk_enable(mcbsp->clk) [takes and holds clockfw_lock] \- omap2_clk_enable() \- _omap2_clk_enable() \- omap_mcbsp_clk_enable() \- clk_enable(child clock) [tries for clockfw_lock again] mcbsp_clk is a virtual clock and it comprises several child clocks. when enable mcbsp_clk in omap_mcbsp_request(), the enable function of mcbsp_clk will enable its child clocks, then the deadlock occurs. The solution is to remove the virtual clock and enable these child clocks in omap_mcbsp_request() directly. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix compile for various McBSPTony Lindgren
Include irqs.h or cpu.h directly as needed to fix omap builds. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-08[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, ↵Russell King
pxa, s3c arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-08ARM: OMAP: Add support for OMAP2430 in McBSPJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xxChandra Shekhar
Based on Chandra's earlier patches in linux-omap tree. Signed-off-by: Chandra Shekhar <x0044955@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08ARM: OMAP: Allocate McBSP devices dynamicallyChandra Shekhar
Based on Chandra's earlier patches in linux-omap tree. Note that omap1_mcbsp_check and omap2_mcbsp_check are no longer needed as there's now omap_mcbsp_check_valid_id() defined. Also some functions can now be marked __init. Signed-off-by: Chandra Shekhar <x0044955@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-09-05[ARM] omap: convert mcbsp to use ioremap()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-04[ARM] omap: fix virtual vs physical address space confusionsRussell King
mcbsp is confused as to what takes a physical or virtual address. Fix the two instances where it gets it wrong. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03ARM: OMAP: McBSP: Add support for mcbsp on mach-omap2Eduardo Valentin
This patch adds support for mach-omap2 based on current mcbsp platform driver. Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>