aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/Kconfig
AgeCommit message (Collapse)Author
2007-07-20[ARM] 4475/2: EM-x270 board supportMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-12kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-03[ARM] 3881/4: xscale: clean up cp0/cp1 handlingLennert Buytenhek
XScale cores either have a DSP coprocessor (which contains a single 40 bit accumulator register), or an iWMMXt coprocessor (which contains eight 64 bit registers.) Because of the small amount of state in the DSP coprocessor, access to the DSP coprocessor (CP0) is always enabled, and DSP context switching is done unconditionally on every task switch. Access to the iWMMXt coprocessor (CP0/CP1) is enabled only when an iWMMXt instruction is first issued, and iWMMXt context switching is done lazily. CONFIG_IWMMXT is supposed to mean 'the cpu we will be running on will have iWMMXt support', but boards are supposed to select this config symbol by hand, and at least one pxa27x board doesn't get this right, so on that board, proc-xscale.S will incorrectly assume that we have a DSP coprocessor, enable CP0 on boot, and we will then only save the first iWMMXt register (wR0) on context switches, which is Bad. This patch redefines CONFIG_IWMMXT as 'the cpu we will be running on might have iWMMXt support, and we will enable iWMMXt context switching if it does.' This means that with this patch, running a CONFIG_IWMMXT=n kernel on an iWMMXt-capable CPU will no longer potentially corrupt iWMMXt state over context switches, and running a CONFIG_IWMMXT=y kernel on a non-iWMMXt capable CPU will still do DSP context save/restore. These changes should make iWMMXt work on PXA3xx, and as a side effect, enable proper acc0 save/restore on non-iWMMXt capable xsc3 cores such as IOP13xx and IXP23xx (which will not have CONFIG_CPU_XSCALE defined), as well as setting and using HWCAP_IWMMXT properly. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] 3666/1: TRIZEPS4 [1/5] coreJürgen Schindele
Patch from Jürgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jürgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3594/1: Poodle: Add touchscreen support + other updatesRichard Purdie
Patch from Richard Purdie Poodle Updates: * Update corgi_ssp to make the GPIO chip selects optional * Enable corgi_ssp for use by poodle * Add corgi touchscreen platform device for poodle * Export locomo platform device. * Set framebuffer device parent correctly Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28[ARM] 3417/1: add support for logicpd pxa270 card engineLennert Buytenhek
Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05[ARM] 3228/1: SharpSL: Move PM code to arch/arm/commonRichard Purdie
Patch from Richard Purdie This patch moves a large chunk of the sharpsl_pm driver to arch/arm/common so that it can be reused on other devices such as the SL-5500 (collie). It also abstracts some functions from the core into the machine and platform specific parts of the driver to aid reuse. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-01[ARM] 3188/1: Add missing i2c dependency for AkitaRichard Purdie
Patch from Richard Purdie Akita requires inbuilt kernel i2c support for its GPIOs. Add this requirement to Kconfig and update the defconfig to match. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-28[ARM] 3179/1: Update/correct Zaurus Kconfig entriesRichard Purdie
Patch from Richard Purdie Add iWMMX Extentions for the pxa27x based Zaurus models and fix a couple of minor mistakes in the PXA Kconfig file. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[ARM] 3149/1: SharpSL: Add Akita (SL-C1000) machine supportRichard Purdie
Patch from Richard Purdie Add the core machine support for the Sharp SL-C1000 (Akita) and enable the Kconfig selection for it. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3098/1: pxa2xx disable ssp irqLiam Girdwood
Patch from Liam Girdwood This patch allows users of the pxa SSP driver to register their own irq handlers instead of using the default SSP handler. It also cleans up the CKEN clock and irq detection as the values are now stored in a table. This patch replaces 2845/1 Changes:- o Added flags parameter to ssp_init() o Added SSP_NO_IRQ flag to disable registering of ssp irq handler (for drivers that want to register their own handler) o Cleaned up clock and irq detection, values are now stored in table. o Added build changes to allow other drivers (e.g audio) to select the ssp driver. o corgi_ssp.c changed to use new interface. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-06[ARM] 3088/1: PXA: Add machine support for the Sharp SL-6000x series of PDAsDirk Opfer
Patch from Dirk Opfer This patch adds basic machine support for the Sharp SL-6000x (Tosa) PDAs. Signed-off-by: Dirk Opfer Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-13[PATCH] SharpSL: Add new ARM PXA machines Spitz and Borzoi with partial ā†µRichard Purdie
Akita Support Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!