aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2410
AgeCommit message (Collapse)Author
2010-05-17s3c: Register gpio bank J with gpiolibLars-Peter Clausen
This is nonportable and wastes a lot of memory and thus should be replaced with a prober solution asap.
2010-05-17s3c24xx: Add number of board irqs for the gta02Lars-Peter Clausen
The gta02 uses the glamo mfd driver which requires 9 board irqs and the pcf50633 mfd driver which requires 40 irqs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2010-05-17s3c24xx: Add support for board IRQsLars-Peter Clausen
Some boards have a need for a set of extra IRQ numbers, for example some multifunction devices which do irq demultiplexing require them. This patch adds S3C2410_BOARD_NR_IRQS which specifies the number of extra board IRQs. Board specific code would use S3C2410_BOARD_IRQ_START to get the number of it's first irq. Since it is possible to support a multiple boards with a single kernel and there is no easy way to set a CONFIG option to multiple values and only use the maximum each board which needs board IRQs has do be explicitly added to irqs.h Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2010-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-07platform-drivers: move probe to .devinit.text in arch/armUwe Kleine-König
A pointer to a probe callback is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.miao@marvell.com> Cc: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07ARM: Merge next-samsung-s3c2443-clockBen Dooks
Merge branch 'next-samsung-s3c2443-clock' into next-samsung
2010-03-07ARM: S3C2443: Further clksrc-clk conversionsBen Dooks
Move more of the core clocks that where left over from the last commit as they are much more core to the system operation. This should allow for easier tracking of any problems. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07ARM: S3C2443: Change to using plat-samsung clksrc-clk implementationBen Dooks
The S3C2443 clock code could easily make use of the clksrc implementation in plat-samsung for many of the clocks. Make the clocks that easily move to clksrc-clk over, update any initialisation and remove the old register definitions from the header file (it is only being used once). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24ARM: S3C2443: GPIO: Correct AC97 pin definesJassi Brar
GPIO_E-[5,9] pin functionality was defined incorrectly. The patch corrects and adds missing pins. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-24ARM: SAMSUNG: Move include/mach files out of plat-s3cBen Dooks
Move the include/mach files out of plat-s3c and into the relevant machine files. This does mean copying the files, but there is nowhere else to put them. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-21ARM: SAMSUNG: Remove dma-plat.h to allow plat-s3c64xx to be removedBen Dooks
dma-plat.h is the last file left in plat-s3c64xx, but to remove it we must also change the use of dma-plat.h by the core code and the s3c24xx implementation. Rename the s3c24xx dma-plat.h in the common plat-samsung directory as it may be used for other ports. Move the specific dma bits into the mach-s3c64xx directory and update the build as needed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-20ARM: SAMSUNG: Move pm-core.h to machine directoryBen Dooks
Move the pm-core.h to the machine include directory in the process of eliminating the plat-s3c64xx. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-05Fix spelling of 'platform' in comments and docStefan Weil
Replace platfrom -> platform. This is a frequent spelling bug. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-19ARM: SAMSUNG: Remove empty gpio-core.h and use central plat/gpio-core.hBen Dooks
Rename mach-s3c2410/include/mach/gpio-core.h to mach/gpio-track.h so that it can be included by <plat/gpio-core.h> when needed. Eliminate all other empty gpio-core.h files and just include the <plat/gpio-core.h> as necessary. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: S3C24XX: Add mci platform data set call s3c24xx_mci_set_platdata().Ben Dooks
Add a s3c24xx_mci_set_platdata() call for all the machine files that have platform data for the MCI driver. This brings the MCI device into line with the other devices with __initdata and a specific call to ensure the right structure type is being passed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-19ARM: SAMSUNG: Add platform data registration for OHCIBen Dooks
Add a platform data helper for the OHCI device Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C: Rename s3c_device_usb to s3c_device_ohciBen Dooks
Prepare for the forthcoming device changes by renaming s3c_device_usb to s3c_device_ohci as this is what the device represents. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23ARM: S3C24XX: touchscreen device definitionArnaud Patard
Add definition for the touchscreen driver platform data and initial support for the H1940 machine. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23ARM: mach-bast: add NAND_SCAN_SILENT_NODEV to optional devicesBen Dooks
Add the NAND_SCAN_SILENT_NODEV to the optional NAND devices that may not be fitted to the board Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-17Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi: spi_txx9.c: use resource_size() spi: spi_sh_sci.c: use resource_size() spi: spi_mpc8xxx.c: use resource_size() spi: spi_bfin5xx.c: use resource_size() spi: atmel_spi.c: use resource_size() spi: Add s3c64xx SPI Controller driver atmel_spi: fix dma addr calculation for len > BUFFER_SIZE spi_s3c24xx: add FIQ pseudo-DMA support spi: controller driver for Designware SPI core spidev: add proper section markers spidev: use DECLARE_BITMAP instead of declaring the array
2009-12-17spi_s3c24xx: add FIQ pseudo-DMA supportBen Dooks
Add pseudo-DMA by FIQ to the S3C24XX SPI driver. This allows the driver to get DMA-like performance where there are either no free DMA channels or when doing transfers that required both TX and RX data paths. Since this patch requires the addition of an assembly file to hold the FIQ code, we rename the module (instead of adding a rename of the .c file to this patch). We expect most users are loading this via udev and thus there should be no change to the userland configuration. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-03ARM: Merge next-s3c24xx-dev-rtpBen Dooks
Merge branch 'next-s3c24xx-dev-rtp' into for-rmk Conflicts: arch/arm/mach-s3c2440/mach-anubis.c
2009-12-01ARM: H1940: Convert h1940 bluetooth driver to rfkillarnaud.patard@rtp-net.org
Better using standard interfaces to enable/disable bluetooth Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: H1940: add lcd/backlight device definitionarnaud.patard@rtp-net.org
Add lcd and backlight device definition. The pwm backlight stuff does not allow to really set maximum pwm as with my custom driver but it's better to use standard driver instead of out of tree driver. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> [ben-linux@fluff.org: tidy header] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: H1940: enable rtcarnaud.patard@rtp-net.org
Enable S3C2410 rtc on h1940 Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> [ben-linux@fluff.org: tidy header] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: H1940: add mmc devicearnaud.patard@rtp-net.org
Add mmc host support to h1940 Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> [ben-linux@fluff.org: tidy description] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: N30: Use s3c_i2c0_set_platdata() to set I2C platform dataBen Dooks
Fix mach-n30.c to use the s3c_i2c0_set_platdata() call to register the platform data with the system to get rid of any reliance on having a real device structure available in memory. Since s3c_i2c0_set_platdata() copies the data, mark the original as __initdata so it is thrown away. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: S3C: Add NAND device platform data set callBen Dooks
2009-12-01ARM: H1940: Correct name of the local platform devices for LED and BluetoothBen Dooks
The mach-h1940.c file was using s3c_device_ where it really should be calling these local definitions h1940_device to ensure they are not mistaken for real s3c_devices when the device change is done. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: S3C: Update Simtec copyright statements from , to - [2]Ben Dooks
There are a number of statements of the form A, B or A, B, C where the numbers A,B,C are not consecutive. However, referencing [1] it is the correct thing to replace these with A-B or A-C as apropriate. [1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices section 4iii 'Year of publication' Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: S3C: Update Simtec copyright statements from , to -Ben Dooks
There are a number of statements of the form A, B or A, B, C where the numbers A,B,C are consecutive. Tidy these up to be A-B or A-C as appropriate and to comply better with copyright standards [1] [1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices section 4iii 'Year of publication' Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: S3C: Fix Simtec copyright statements in Documentation/S3C24XXBen Dooks
The (c) alone is not a sufficient copyright statement, nor is it a good replacement for the proper encircled &copy; symbol [1]. Add the word copyright to the apropriate places and remove the (c) symbol. [1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices section 4 'What does a notice consist of?' Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-01ARM: S3C24XX: machine support for Simtec AudioBen Dooks
Add the platform/machine support for the audio devices fitted to the Simtec range of boards since the move to ASoC. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09Kconfig: Remove useless and sometimes wrong commentsMichael Roth
Additionally, some excessive newlines removed. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-28ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.cBen Dooks
Fix sparse warning in arch/arm/mach-s3c2410/gpio.c due to missing include of <mach/gpio-fns.h>. Fixes the following warning: warning: symbol 's3c2410_gpio_irqfilter' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C: Add info for supporting circular DMA buffersBen Dooks
The S3C64XX DMA implementation will work a lot better with the ability to enqueue circular buffers as the hardware can do it's own linked-list management. Add a function s3c_dma_has_circular() to show that the system can do this and a flag for the channel. Update the s3c24xx/s3c64xx I2S DMA code to deal with this. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Mark Brown <broonie@@opensource.wolfsonmicro.com>
2009-09-17ARM: S3C: Add missing selection of S3C_DEV_NAND in machine Kconfigs.Ben Dooks
A number of machines that need s3c_device_nand present do not select this in their Kconfig entries. Add the necessary selection of the configuration S3C_DEV_NAND so that we avoid the following error: arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io': arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts': arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init': arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14Merge branch 'next-s3c64xx-moves' into next-s3cBen Dooks
2009-08-14Merge branch 'next-s3c24xx-cpufreq' into next-s3cBen Dooks
2009-08-14Merge branch 'next-s3c24xx' into next-s3cBen Dooks
2009-08-14Merge branch 'next-s3c-hwmon' into next-s3cBen Dooks
2009-08-14ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10Ben Dooks
Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the correct GPIO configuration register definitions in regs-gpio.h Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14ARM: S3C24XX: Add platform device for AC97 controllerMark Brown
Move the definition of the "generic" IRQ in the process. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-31ARM: S3C: move s3c_device_nand from plat-s3c24xx to plat-s3cPeter Korsgaard
Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c, now that the nand driver also support the s3c64xx devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C: CPUFREQ: Add debugfs support for cpufreqBen Dooks
Add debugfs support for the cpufreq driver to allow information about the system state to be exported to the user. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>