aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
AgeCommit message (Collapse)Author
2010-02-24OMAP: DSS2: move timing functionsTomi Valkeinen
Move check/set/get_timings() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_wss()Tomi Valkeinen
Move set/get_wss() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/disable/suspend/resumeTomi Valkeinen
Move enable/disable/suspend/resume from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move update() and sync()Tomi Valkeinen
Move update() and sync() from omap_dss_device to omap_dss_driver. Also, update was hardcoded to use virtual channel 0. This patch adds a parameter that specifies the VC. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_update_mode()Tomi Valkeinen
Move set/get_update_mode() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/get_te()Tomi Valkeinen
Move enable/get_te() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get_recommended_bpp()Tomi Valkeinen
Move get_recommended_bpp() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get_resolution()Tomi Valkeinen
Move get_resolution() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/disable_channel to overlay managerTomi Valkeinen
Move enable/disable_channel() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move wait_vsync()Tomi Valkeinen
Move wait_vsync() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get/set_rotate()Tomi Valkeinen
Move get/set_rotate() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_mirror()Tomi Valkeinen
Move set/get_mirror() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move memory_read()Tomi Valkeinen
Move memory_read() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move run_test()Tomi Valkeinen
Move run_test() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-18OMAP: DSS2: remove sub-panel systemTomi Valkeinen
The system to allow panel drivers to exists as attached to ctrl drivers did never work very well. It is not useed, and this patch removes it to make the driver cleaner. For now, controller drivers need to include also the panel driver code. In the future a proper mechanism for this should be developed, perhaps by creating busses for controllers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: export dsi_vc_enable_hs()Tomi Valkeinen
Rename and export dsi_vc_enable_hs() so that the display drivers can control the mode of the DSI link. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-15OMAP: DSS2: DSI: add helpers for DCS read/writeTomi Valkeinen
Add helper functions for most common DCS read and write operations. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14mfd: Add support for twl6030 irq frameworkBalaji T K
This patch adds support for phoenix interrupt framework. New iInterrupt status register A, B, C are introduced in Phoenix and are cleared on write. Due to the differences in interrupt handling with respect to TWL4030, twl6030-irq.c is created for TWL6030 PMIC Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-11omap3: Fix OMAP35XX_REV macrosSanjeev Premi
In original implementation, the revision passed to these macros contained revision number in lower nibble. But, later the revision bits (OMAP_REVBITS_XX) were defined to use omap_revision[15:08] where revision number is containied in higher nibble. This patch updates the macros; else incorrect revision is detected for OMAP35xx devices. Signed-off-by: Sanjeev Premi <premi@ti.com>
2009-12-11omap3: id code detection 3525 vs 3515Sergey Lapin
The runtime detection of OMAP3515 and OMAP3525 was reversed. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: header: remove unused data-typevikram pandita
Remove unused data type omap_gpio_switch_config Thereby also get rid of following sparse warnings: arch/arm/plat-omap/include/plat/board.h :121:20: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :122:19: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :123:24: warning: dubious bitfield without explicit `signed' or `unsigned' Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: arch/arm/plat-omap/devices.c - sort alphabeticallyLadislav Michl
Comment in omap_init_devices asks to keep init calls and their implementations in alphabetical order, so let it be that way. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: Correcting GPMC_CONFIG1_DEVICETYPE_NANDVimal Singh
For NAND devices '2' should be used with GPMC_CONFIG1_DEVICETYPE instead of '1'. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP3: serial - allow platforms specify which UARTs to initializeMika Westerberg
This patch adds new function: omap_serial_init_port(port) that can be used to initialize only selected UARTs as serial ports. Platforms can then in their board files call this function instead of omap_serial_init() if they don't want to use all UARTs as serial ports. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: AuxCoreBoot registers only accessible in secure modeSantosh Shilimkar
The AuxCoreBoot0 and AuxCoreBoot1 can be only accessed in secure mode. Replace the current code with secure monitor API's to access/modify these registers. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: Fix SRAM base and sizeSantosh Shilimkar
This patch fixes the public sram base address and available size on OMAP4430. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11OMAP4: Fix cpu detectionSantosh Shilimkar
This patch fixes the OMAP4430 cpu detection. The IC rev detection is done with hawkeye and rev. Note that rev does not map directly to defined processor revision numbers as ES1.0 uses value 0.It also fixes the SCM base address to read the correct ID_CODE register. Also the cpu_is_omap44xx() and cpu_is_omap443x() correctly populated instead of always being true Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: I2C mux and clocks for omap7xxCory Maccarrone
This change adds MUX pin configuration and clocks for I2C support to OMAP 730 and 850-based devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: Add omap7xx USB supportCory Maccarrone
This change implements USB client side support into the HTC Herald board configuration. It uses a similar, but updated algorithm to initialize the USB as is used in the linwizard project. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap1: DMA: move LCD related code from plat-omap to mach-omap1Janusz Krzysztofik
All of the LCD DMA code in plat-omap/dma.c appears to be OMAP1-only (and apparently only is available on a subset of OMAP1 chips). Move this code to mach-omap1/lcd_dma.c. Tested on OMAP1510 Amstrad Delta. Compile-tested with omap_generic_2420_defconfig. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: use smc91x_platdata to setup smc91xLadislav Michl
Use smc91x_platdata to setup smc91x, so we can get rid of OMAP specific stuff in smc91x driver Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Remove old mux code for 34xxTony Lindgren
Remove old mux code for 34xx Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: Split i2c platform init for mach-omap1 and mach-omap2Tony Lindgren
Otherwise we cannot limit new mux code to mach-omap2. The same signal names should eventually work for other omaps under mach-omap2. Note that these pins don't need to be OMAP_PIN_INPUT_PULLUP, just OMAP_PIN_INPUT is enough. Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style pin multiplexing code for omap3Tony Lindgren
Initially only for 34xx. This code allows us to: - Make the code more generic as the omap internal signal names can stay the same across omap generations for some devices - Map mux registers to GPIO registers that is needed for dynamic muxing of pins during off-idle - Override bootloader mux values via kernel cmdline using omap_mux=some.signa1=0x1234,some.signal2=0x1234 - View and set the mux registers via debugfs if CONFIG_DEBUG_FS is enabled Cc: Mike Rapoport <mike@compulab.co.il> Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11ARM: OMAP4: PM: Add dummy hooks for OMAP4 dpll api'sRajendra Nayak
This patch adds dummy hooks for OMAP4 dpll api's. Removes dummy hooks for clkdev api's and enables CLKDEV for OMAP4. Also comments clockdomain calls from within the clock framework as its not supported yet for OMAP4. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: OMAP4 clock tree and clkdev registrationRajendra Nayak
This patch defines all the clock nodes in OMAP4430 platform. All the clock node structs and the clkdev table is autogenerated using a python script (gen_clock_tree.py) developed by Paul Walmsley, Benoit Cousson and Rajendra Nayak. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11ARM: OMAP4: PM: Fix the PRM and CM base addressesRajendra Nayak
This patch fixes the PRM and CM base addresses and adds a new CM2 base address for OMAP4 Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com>
2009-12-11OMAP: omap_device: track latency in nanosecondsKevin Hilman
Rather than having to do a usecs = nsecs / NSECS_PER_USEC to track latency in usecs, just track it in nanoseconds. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: fix nsec/usec conversion in latency calculationsKevin Hilman
Use usecs = nsecs / NSEC_PER_USEC; instead of usecs = nsecs * NSEC_PER_USEC; Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()Kevin Hilman
During suspend and resume, when omap_device deactivation and activation is happening, the timekeeping subsystem has likely already been suspended. Thus getnstimeofday() will fail and trigger a WARN(). Use read_persistent_clock() instead of getnstimeofday() to avoid this. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: use UINT_MAX for default wakeup latency limitKevin Hilman
The _dev_wakeup_lat_limit field of struct omap_device is u32, so use UINT_MAX instead of INT_MAX for the default maximum. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP: omap_device: add to_omap_device() macroKevin Hilman
Following the model of to_platform_device(), add to_omap_device() macro so a platform_device pointer can be converted into an omap_device pointer. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP hwmod: add names to module MPU IRQ linesPaul Walmsley
Replace the existing u8 array of module MPU IRQ lines with a struct that includes a name - similar to the existing struct omap_hwmod_dma_info. Device drivers can then use platform_get_resource_byname() to retrieve specific IRQs without nasty dependencies on array ordering. Thanks to Benoît Cousson <b-cousson@ti.com> and Kevin Hilman <khilman@deeprootsystems.com> for feedback on this approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handlingPaul Walmsley
This patch fills in the OCP_SYSCONFIG.AUTOIDLE handling in the OMAP hwmod code. After this patch, the hwmod code will set the module AUTOIDLE bit (generally <module>.OCP_SYSCONFIG.AUTOIDLE) to 1 by default upon enable. If the hwmod flag HWMOD_NO_OCP_AUTOIDLE is set, AUTOIDLE will be set to 0 upon enable. Upon module disable, AUTOIDLE will be set to 1. Enabling module autoidle should save some power. The only reason to not set the OCP_SYSCONFIG.AUTOIDLE bit is if there is a bug in the module RTL, e.g., the MPUINTC block on OMAP3. Comments from Kevin Hilman <khilman@deeprootsystems.com> inspired this patch, and Kevin tested an earlier version of this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11OMAP clock/hwmod: fix off-by-one errorsPaul Walmsley
Fix loop bailout off-by-one bugs reported by Juha Leppänen <juha_motorsportcom@luukku.com>. This second version incorporates comments from Russell King <linux@arm.linux.org.uk>. A new macro, 'omap_test_timeout', has been created, with cleaner code, and existing code has been converted to use it. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Juha Leppänen <juha_motorsportcom@luukku.com> Cc: Russell King <linux@arm.linux.org.uk>
2009-12-11OMAP3: PM: Fix for MPU power domain MEM BANK positionThara Gopinath
MPU power domain bank 0 bits are displayed in position of bank 1 in PWRSTS and PREPWRSTS registers. So read them from correct position Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP powerdomain: rearrange struct powerdomain to save some memoryPaul Walmsley
This patch rearranges the order of structure members in struct powerdomain to avoid wasting memory due to alignment restrictions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-12-11OMAP powerdomain/PM: use symbolic constants for the max number of power statesPaul Walmsley
Replace some bare constants with power states. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-11OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK,POWER}DOMAINPaul Walmsley
Avoid cluttering the Kconfig space with debug options that are rarely used. These can now be enabled and disabled by patching the "#undef DEBUG" in the source files with "#define DEBUG", conforming to the practice for the rest of the linux-omap code. Also, while we're here, some lines in plat-omap/Kconfig use sets of leading spaces when those lines should start with tabs. Convert most of them to use tabs. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-06 04:04:20 +0000