aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2008-12-01spi: fix spi_s3c24xx_gpio num_chipselectBen Dooks
The spi master driver must have num_chipselect set to allow the bus to initialise. Pass this through the platform data. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-27Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2008-11-27[ARM] pxa/palmtx: misc fixes to use generic GPIO APIMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-27Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2008-11-26ARM: OMAP: Fixes for suspend / resume GPIO wake-up handlingTero Kristo
Use the correct wake-up enable register, and make it work with 34xx also. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-26[ARM] pxa/corgi: update default config to exclude tosa from being builtEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-26[ARM] pxa/pcm990: use negative number for an invalid GPIO in camera dataGuennadi Liakhovetski
0 is a valid GPIO number, use a negative number to specify, that this camera doesn't have a GPIO for bus-width switching. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-25ARM: OMAP: Typo fix for clock_allow_idleAmit Kucheria
The second clk_deny_idle instance should be clk_allow_idle instead. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-22[ARM] pxa/MioA701: bluetooth resume fixRobert Jarzmik
The G3IPL expects the value at RAM address 0xa020b020 to be exactly 1 to setup the bluetooth GPIOs properly. The actual code got a value from gpio_get_value() which was not 1, but a "not equal to 0" integer. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-22[ARM] pxa/MioA701: fix memory corruption.Robert Jarzmik
In the resume bootstrap, the early disable address is wrong. Fix it to RAM address 0xa020b000 instead of 0xa0200000, and make it consistent with RESUME_ENABLE_ADDR in mioa701.c. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-17[ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other ↵Jaya Kumar
strings This patch makes do_hw_reset the default reboot behavior when nothing else matches. This restores reboot functionality on gumstix basix devices where reboot=cold is the default boot argument. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-17Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2008-11-16[ARM] pxa: fix incorrect PCMCIA PSKTSEL pin configuration for spitzEric Miao
The original incorrect configuration caused GPIO79_nCS_3 being overriden, thus resulted in the NAND flash not being detected. The real PSKTSEL pin is on GPIO104 instead of GPIO79. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net>
2008-11-16[ARM] pxa: fix I2C controller device being registered twice on AkitaEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net>
2008-11-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants [ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constants [ARM] dma-mapping: fix compiler warning [ARM] iop: iop3xx needs registers mapped uncached+unbuffered [ARM] versatile: correct MMC clock rate [ARM] realview: correct MMC clock rate [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range
2008-11-13[ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constantsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-13[ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constantsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-13[ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constantsRussell King
FLASH_* and EPROM_* constants are unused, and clash with drivers: drivers/atm/ambassador.h:257:1: warning: "FLASH_BASE" redefined drivers/atm/ambassador.h:258:1: warning: "FLASH_SIZE" redefined drivers/atm/iphase.h:332:1: warning: "EPROM_SIZE" redefined so remove them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-13[ARM] dma-mapping: fix compiler warningRussell King
arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu': arch/arm/mm/dma-mapping.c:588: warning: statement with no effect Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-11iop-adma: use iop_paranoia() for debug BUG_ONsDan Williams
Now that the critical read back to flush the next descriptor address is fixed we can downgrade some BUG_ONs that need only be enabled when testing changes to the driver. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-11pxafb: introduce LCD_TYPE_MASK and use it.Eric Miao
Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-09[ARM] iop: iop3xx needs registers mapped uncached+unbufferedRussell King
Mikael Pettersson reported: The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0 (the first ethernet port) on my Thecus n2100 XScale box. There is however still a strange "ghost" device that gets partially detected in 2.6.28-rc2 vanilla. The IOP321 manual says: The user designates the memory region containing the OCCDR as non-cacheable and non-bufferable from the IntelR XScaleTM core. This guarantees that all load/stores to the OCCDR are only of DWORD quantities. Ensure that the OCCDR is so mapped. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-08[ARM] versatile: correct MMC clock rateRussell King
The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-08[ARM] realview: correct MMC clock rateRussell King
The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-08[ARM] 5329/1: Feroceon: fix feroceon_l2_inv_rangeNicolas Pitre
Same fix as commit c7cf72dcadb: when 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. Cc: <stable@kernel.org> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2008-11-06Merge branch 'fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop
2008-11-06[ARM] xsc3: fix xsc3_l2_inv_rangeDan Williams
When 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. So check for (start < end) which will not walk off into invalid address ranges when (start > end). This issue was caught by drivers/dma/dmatest. 2.6.27 is susceptible. Cc: <stable@kernel.org> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Cc: Lennert Buytenhek <buytenh@marvell.com> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-06[ARM] mm: fix page table initializationRussell King
As a result of the ptebits changes, we ended up marking device mappings as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with serial ports and the like. While reviewing the section mapping table entries, other errors in the memory type settings for devices were detected and confirmed to prevent Xscale3 platforms booting. Tested on: OMAP34xx (ARMv7), OMAP24xx (ARMv6), OMAP16xx (ARM926T, ARMv5), PXA311 (Xscale3), PXA272 (Xscale), PXA255 (Xscale), IXP42x (Xscale), S3C2410 (ARM920T, ARMv4T), ARM720T (ARMv4T) StrongARM-110 (ARMv4) Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-06[ARM] fix naming of MODULE_START / MODULE_ENDRussell King
As of 73bdf0a60e607f4b8ecc5aec597105976565a84f, the kernel needs to know where modules are located in the virtual address space. On ARM, we located this region between MODULE_START and MODULE_END. Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END. Update ARM to use the same naming, so is_vmalloc_or_module_addr() can work properly. Also update the comment on mm/vmalloc.c to reflect that ARM also places modules in a separate region from the vmalloc space. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-04ARM: OMAP: Fix define for twl4030 irqsTony Lindgren
Otherwise twl4030 gpios won't work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bitsTony Lindgren
On omap24xx, INTCPS_SIR_IRQ_OFFSET bits [6:0] contains the current active interrupt number. However, on 34xx INTCPS_SIR_IRQ_OFFSET bits [31:7] also contains the SPURIOUSIRQFLAG, which gets set if the interrupt sorting information is invalid. If the SPURIOUSIRQFLAG bits are not ignored, the interrupt code will occasionally produce a bunch of confusing errors: irq -33, desc: c02ddcc8, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c006f23c, handle_bad_irq+0x0/0x22c ->chip(): 00000000, 0x0 ->action(): 00000000 Fix this by masking out only the ACTIVEIRQ bits. Also fix a confusing comment. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix debugfs_create_*'s error checking method for arm/plat-omapZhaolei
debugfs_create_*() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Comparing to PATCH v1, because clk_debugfs_init is included in "#if defined CONFIG_DEBUG_FS", we only need to check NULL return. Thanks Li Zefan <lizf@cn.fujitsu.com> debugfs_create_u8() and other function's return value's checking method are also fixed in this patch. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix compiler warnings in gpmc.cSanjeev Premi
Fix these compiler warnings: gpmc.c: In function 'gpmc_init': gpmc.c:432: warning: 'return' with a value, in function returning void gpmc.c:439: warning: 'return' with a value, in function returning void Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04[ARM] fix VFP+softfloat binariesRussell King
2.6.28-rc tightened up the ELF architecture checks on ARM. For non-EABI it only allows VFP if the hardware supports it. However, the kernel fails to also inspect the soft-float flag, so it incorrectly rejects binaries using soft-VFP. The fix is simple: also check that EF_ARM_SOFT_FLOAT isn't set before rejecting VFP binaries on non-VFP hardware. Acked-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] 5326/1: AFEB9260: Fix for i2c_board_info structureSergey Lapin
i2c_board_info array was filled incorrectly. Due to circumstances, the way it is filled works. This patch fills array properly. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30Merge branch 'for-rmk-rc' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6
2008-10-30[ARM] mx31ads: Add missing includeSascha Hauer
mx31ads_defconfig compilation failed with arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart': arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function) arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.) make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1 Add missing include Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] MXC: Fix mxc_gpio_get(), which must read PSR register instead DR.Darius Augulis
The Data register holds the value we have written to a gpio. To get the input value we must read the Pad Status Register MX3 (or Sample Status register in MX1/2 terms) Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] MX3: Use ioremap wrapper to map SoC devices nonsharedSascha Hauer
The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-30[ARM] gpio_free might sleep, arm architectureUwe Kleine-König
According to the documentation gpio_free should only be called from task context only. To make this more explicit add a might sleep to all implementations. This patch changes the gpio_free implementations for the arm architecture. DaVinci is skipped on purpose to simplify the merge process for patches switching it over to use gpiolib as per request by David Brownell. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] ep93xx: fix OHCI DMA maskMatthias Kaehlcke
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2008-10-30[ARM] sharpsl_pm: fix compilation w/o CONFIG_PMDmitry Baryshkov
Fix compilation of sharpsl_pm when CONFIG_PM in unselected. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-30[ARM] pcm037: map AIPS1 and AIPS2 as nonshared areaSascha Hauer
The internal devices of the MX3 Processor have to be mapped MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-10-29[ARM] corgi_lcd: fix simultaneous compilation with corgi_blDmitry Baryshkov
corgi_lcd has symbol conflict with corgi_bl driver. Fix it by renaming common symbol in new corgi_lcd driver. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-29[ARM] pxa/spitz: fix spi cs on spitzDmitry Baryshkov
On spitz configure SPI CS GPIOs as outputs to unbreak spi chip selection. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-27Merge commit 'v2.6.28-rc2' into tracing/urgentIngo Molnar
2008-10-24[ARM] xsc3: revert writethrough memory-type encoding changeDan Williams
Commit 40df2d1d "[ARM] Update Xscale and Xscale3 PTE mappings" was fingered by git-bisect for a boot failure on iop13xx. The change made L_PTE_MT_WRITETHROUGH mappings L2-uncacheable. Russell points out that this mapping is used for the vector page. Given the regression, and the fact this page is used often, restore the old behaviour. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-10-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: corgi backlight driver should not select ssp drivers [ARM] 5321/1: Kirkwood: fix typo in Makefile [ARM] 5320/1: fix assembly constraints in implementation of do_div() [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S [ARM] 5316/1: AT91: oops (regression) fix on gpio irq [ARM] msm: vreg interface to msm7k pmic [ARM] msm: dma: various basic dma improvements and bugfixes [ARM] msm: clock: provide clk_*() api support for [ARM] msm: clean up iomap and devices [ARM] msm: add proc_comm support, necessary for clock and power control [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h [ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based drivers [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:12:55 +0000