aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branch 'orion' into develRussell King
* orion: (26 commits) [ARM] Orion: implement power-off method for QNAP TS-109/209 [ARM] Orion: add support for QNAP TS-109/TS-209 [ARM] Orion: I2C support [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries [I2C] Split mv643xx I2C platform support [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323 [ARM] Orion defconfig [ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323 [ARM] Orion: MV88F5181 support bits [ARM] Orion: Buffalo/Revogear Kurobox Pro support [ARM] OrionNAS RD board support [ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board [ARM] Orion: common platform setup for Gigabit Ethernet port [ARM] Orion: platform device registration for UART, USB and NAND [ARM] Orion: system timer support [ARM] Orion edge GPIO IRQ support [ARM] Orion: IRQ support [ARM] Orion: provide GPIO method for enabling hardware assisted blinking [ARM] Orion: GPIO support [ARM] Orion: programable address map support ... Conflicts: arch/arm/Kconfig arch/arm/Makefile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', ↵Russell King
's3c2410', 'sa1100' and 'vfp' into devel * at91: (24 commits) [ARM] 4615/4: sam926[13]ek buttons updated [ARM] 4765/1: [AT91] AT91CAP9A-DK board support [ARM] 4764/1: [AT91] AT91CAP9 core support [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation [ARM] 4761/1: [AT91] Board-support for NEW_LEDs [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 [ARM] 4759/1: [AT91] Buttons on CSB300 [ARM] 4758/1: [AT91] LEDs [ARM] 4757/1: [AT91] UART initialization [ARM] 4756/1: [AT91] Makefile cleanup [ARM] 4755/1: [AT91] NAND update [ARM] 4754/1: [AT91] SSC library support [ARM] 4753/1: [AT91] Use DMA_BIT_MASK [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY [ARM] 4646/1: AT91: configurable HZ, default to 128 [ARM] 4688/1: at91: speed-up irq processing [ARM] 4657/1: AT91: Header definition update ... * ep93xx: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups [ARM] 4668/1: ep93xx: implement new GPIO API * iop: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device [ARM] 4708/1: iop: update defconfigs for 2.6.24 * kprobes: ARM kprobes: let's enable it ARM kprobes: special hook for the kprobes breakpoint handler ARM kprobes: prevent some functions involved with kprobes from being probed ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack ARM kprobes: add the kprobes hook to the page fault handler ARM kprobes: core code ARM kprobes: instruction single-stepping support * ks8695: [ARM] 4603/1: KS8695: debugfs interface to view pin state [ARM] 4601/1: KS8695: PCI support * misc: [ARM] remove duplicate includes [ARM] CONFIG_DEBUG_STACK_USAGE [ARM] 4689/1: small comment wrap fix [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS [SERIAL] 21285: Report baud rate back via termios [ARM] Remove pointless casts from void pointers, [ARM] Misc minor interrupt handler cleanups [ARM] Remove at91_lcdc.h [ARM] ARRAY_SIZE() cleanup [ARM] Update mach-types * msm: [ARM] msm: dma support for MSM7X00A [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) [ARM] msm: irq and timer support for ARCH_MSM7X00A [ARM] msm: core platform support for ARCH_MSM7X00A * s3c2410: (33 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ... * sa1100: [ARM] sa1100: add clock source support * vfp: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support [ARM] 4583/1: ARMv7: Add VFPv3 support [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28[ARM] 4795/1: S3C244X: Add armclk and setparent callBen Dooks
Add armclk to the supported clocks on the S3C2440 and S3C2442 to better represent the DVS state which controls whether FCLK or HCLK is fed to the ARM core. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock codeBen Dooks
Merge together the bits of the S3C2440 and S3C2442 clock code that can be. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping functionBen Dooks
Add the reverse of s3c2410_gpio_getirq to convert a IRQ number into a GPIO pin number. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4791/1: S3C2412: Make fclk a parent of msysclkBen Dooks
In the S3C2412 fclk is derived from msysclk, not straight from the MPLL output. Set clk_f.parent appropriately. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.Ben Dooks
The msysclk clock was checking for the wrong PLL for the parent in s3c2412_setparent_msysclk(), trying the UPLL instead of the MPLL output. Also ensure the mpll and fclks are at the same rate at init time. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if ↵Ben Dooks
S3C2410_DMAF_AUTOSTART used. Fix the channel parameter to s3c2410_dma_ctrl() in s3c2410_dma_enqueue() if the S3C2410_DMAF_AUTOSTART is set on the channel. Spotted by Steven Ryu at Samsung. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated ↵Ben Dooks
channel number The s3c2410_dma_request() function should return the channel allocated instead of zero for success. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4784/1: S3C24XX: Fix GPIO restore glitchesBen Dooks
The core resume code may have caused glitches in the GPIO when restoring the GPIO state due to the order in which the GPIO registers were being written. Change the restore process take into account the state of the GPIOs on resume and the state the system wants to restore them to. See the code comments in the patch for more details of the process. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()Ben Dooks
Add the call s3c2410_gpio_getpull() to return the current state of the pin's pull-up. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4781/1: S3C24XX: DMA suspend and resume supportBen Dooks
If an DMA channel was active at suspend, then ensure that it is correctly reconfigured when the system resumes. Note, the previous policy was for each driver to handle their own reconfiguration on resume. The policy has been changed to make the individual driver's job easier. Signed-off-by: Ben Dooks <ben-linux@flfuf.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RXBen Dooks
The current S3C24XX DMA code does not allow for an peripheral that has one channel for RX and another for TX. This patch adds a per-cpu dma operation to select the transmit or receive channel, and adds support to the S3C2412 for the seperate DMA channels for TX and RX. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() callBen Dooks
Add s3c2412_gpio_set_sleepcfg() to allow the setting of the sleep configuration of the GPIO blocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4778/1: S3C2412: Add armclk and init from DVS stateBen Dooks
Add armclk to the S3C2412 to indicate the current clock connected to the ARM core. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for ↵Ben Dooks
the clk Add checks for clk_set_rate() and ensure that we do not allow set_rate to be called for a clock that does not have it defined. Add default methods for fclk, hclk, pclk and mpll. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4731/1: S3C2412: Check for incomplete sleepBen Dooks
Check if the sleep command returns due to a pending interrupt in the standby unit. If this happens, try and ack the IRQ before re-trying the resume. It is currently unclear whether the resume can be backed out of at this stage as this could cause a problem with level based interrupts. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4730/1: S3C2412: Ensure the PWRCFG has the right mode for RTC wakeBen Dooks
Ensure that if the RTC IRQ is not selected for wake in the base configuration, then the PWRCFG has the same value set in it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4729/1: VR1000: Do not add IIS device on initialisationBen Dooks
The IIS device is being registered by the Simtec Audio driver, and thus registering here causes an error due to device tree naming collision. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4728/1: BAST: Do not add IIS device on initialisationBen Dooks
The IIS device is being registered by the Simtec Audio driver, and thus registering here causes an error due to device tree naming collision. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4727/1: S3C2412: Remove unused GPESLPCONBen Dooks
S3C2412_GPESLPCON does not exist in the register mappings, so remove it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4725/1: S3C2412: Fix IIS and SDI definitions in DMA mapBen Dooks
The IIS and SDI register hw_addr definitions are incorrect in the DMA map for the S3C2412. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4724/1: S3C2412: Select S3C2410 base GPIO implementationBen Dooks
The S3C2412 GPIO is similar enough to the S3C2410 that it can use it as a base for GPIO functionality. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4723/1: BAST: Fix LCD driver default display settingBen Dooks
We have a default display set to 4, when we only have three registered displays. Fix this argument (a seperate patch has been generated to ensure that the LCD driver takes notice of this bug) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4762/1: Basic support for Toradex Colibri moduleDaniel Mack
This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] pxa: fix mci_init functions returning -1Russell King
Fix all those PXA mci_init functions which return -1 rather than propagating the error code to the higher levels. Remove the silly set_irq_type() calls as well - use the flags for request_irq() instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfixRichard Purdie
This patch refactors the code in corgi_lcd.c moving it to the board specific corgi and spitz files where appropriate instead of the existing ifdef mess which hinders readability. Fix spitz_get_hsync_len() to call get_hsync_invperiod so pxafb can be compiled as a module. The confusing variables which represent the inverse horizintal sync period are renamed to "invperiod" consistently. An incorrect comment in corgi_ts.c is also corrected. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270Robert Schwebel
This patch adds baseboard support for the phyCORE-PXA270 development kit (aka PCM-990). This example shows how to use some phyCORE-PXA270 CPU module features on a baseboard in a standard manner. It could be used as a starting point for custom baseboard development. V2: After comments by Eric Miao: - IRQ chained handler fixed - video/graphic support moved to separate patch - ifdef/endif hell reduced ;-) V3: After comments by Russell King - initialise the mmci platform data statically V4: After comments by Russell King - wrong return value in pcm990_mci_init() fixed Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4745/1: pcm027: default configurationRobert Schwebel
This patch adds a basic configration for the phyCORE-PXA270 development kit. In this case development kit means PCM-990 (main baseboard). Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU moduleRobert Schwebel
This patch adds main support for the generic phyCORE-PXA270 CPU module (aka PCM-027). Its as generic as possible to support any kind of baseboard. Note: Neither the CPU module nor the pcm027.c implementation can work without a baseboard support. Baseboard support can be added by the PCM-990 or any custom variant. V2: After comments by Eric Miao: - Currently unsupported devices moved into separate patch - direct call of baseboard initialisation V3: After comments by Russell King - sort include files - setting RTC bit for power control removed - style problems fixed (discovered by checkpatch.pl) Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[NET] smc91x: Make smc91x use IRQ resource trigger flagsRussell King
smc91x is shared between many different platforms. Each platform needs to specify the interrupt type, and in some cases the irq type depends on more than just the build configuration - it depends on runtime checks. Rather than throwing this code into the SMC_IRQ_FLAGS definition, provide a way for these flags to be passed via the IRQ resource itself. Note that IRQF_TRIGGER_* constants are intentionally defined to correspond with the IORESOURCE_IRQ_* interrupt type flags, in much the same way that the low bits of PCI iomem resources correspond with the BAR flag bits. Also provide a way to configure smc91x to read the IRQ flags from the resource. Once all platforms have been converted over (signified by all definitions of SMC_IRQ_FLAGS being -1) SMC_IRQ_FLAGS should be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28[ARM] pxa: add default config for littletoneric miao
default to - PXA300/PXA310 support only (there isn't any littleton board with PXA320 processor for now) - smc91x ethernet support with NFS rootfs - LCD framebuffer support with graphics console Signed-off-by: eric miao <eric.miao> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)eric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4664/1: Add basic support for HTC Magician PDA phonesPhilipp Zabel
This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.Ian Molton
This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4776/1: Add HWUART clock to fix hwuart supportDmitry Baryshkov
This adds back the registration of HWUART clock on pxa25x Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] Fix timer damage from d3d74453c34f8fd87674a8cf5b8a327c68f22e99Russell King
Move the xtime write mode seqlock into timer_tick(), so it only surrounds the call to do_timer(). This avoids a deadlock in update_process_times() ... hrtimer_get_softirq_time() which tries to get a read mode seqlock on xtime, thereby preventing booting. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4763/1: pxa: fix pxa3xx_get_clk_frequency_khz() to return KHzeric miao
The original code incorrectly returns Hz instead of KHz. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-27[ARM] 4615/4: sam926[13]ek buttons updatedDavid Brownell
From: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> On the at92sam9263ek board, tell the input subsystem about the buttons. This patch is taken from Andrew Victor's at91 patchset, then updated to match the latest kernel code and to use labels printed on the board. Also update the at91sam9261ek buttons to cope with input changes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-27i2c-pxa: Add polling transferMike Rapoport
Add polling I2C transfer implementation for PXA I2C. This is needed for cases where I2C transactions have to occur at times interrups are disabled. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c/tps65010: move header to <linux/i2c/...>David Brownell
Move the tps65010 header file from the OMAP arch directory to the more generic <linux/i2c/...> directory, and remove the spurious dependency of this driver on OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: normal_i2c can be made const (remaining drivers)Jean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27ixp4xx-i2c-gpioMichael-Luke Jones
Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing the arch-neutral GPIO API (linux/i2c-gpio.h). Tested by the nslu2-linux and openwrt projects in public firmware releases. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Acked-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-26ARM kprobes: let's enable itNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-01-26ARM kprobes: special hook for the kprobes breakpoint handlerNicolas Pitre
The kprobes code is already able to cope with reentrant probes, so its handler must be called outside of the region protected by undef_lock. If ever this lock is released when handlers are called then this commit could be reverted. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-01-26ARM kprobes: prevent some functions involved with kprobes from being probedNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-01-26ARM kprobes: don't let a single-stepped stmdb corrupt the exception stackNicolas Pitre
If kprobes installs a breakpoint on a "stmdb sp!, {...}" instruction, and then single-step it by simulation from the exception context, it will corrupt the saved regs on the stack from the previous context. To avoid this, let's add an optional parameter to the svc_entry macro allowing for a hole to be created on the stack before saving the interrupted context, and use it in the undef_svc handler when kprobes is enabled. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-01-26ARM kprobes: add the kprobes hook to the page fault handlerNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-01-26ARM kprobes: core codeAbhishek Sagar
This is a full implementation of Kprobes including Jprobes and Kretprobes support. This ARM implementation does not follow the usual kprobes double- exception model. The traditional model is where the initial kprobes breakpoint calls kprobe_handler(), which returns from exception to execute the instruction in its original context, then immediately re-enters after a second breakpoint (or single-stepping exception) into post_kprobe_handler(), each time the probe is hit.. The ARM implementation only executes one kprobes exception per hit, so no post_kprobe_handler() phase. All side-effects from the kprobe'd instruction are resolved before returning from the initial exception. As a result, all instructions are _always_ effectively boosted regardless of the type of instruction, and even regardless of whether or not there is a post-handler for the probe. Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com> Signed-off-by: Quentin Barnes <qbarnes@gmail.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:13:15 +0000