aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2008-07-07[ARM] S3C2440: Add AT2440EVB board supportRamax Lo
Add basic support for AT2440EVB board based on Samsung S3C2440 SoC. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
2008-07-03[ARM] S3C24XX: Split serial driver into core and per-cpu driversBen Dooks
The S3C2410 serial driver in drivers/serial/s3c2410.c has been growing bigger with the addition of more variants of this hardware with the growing Samsung SoCs range. As such, it would be easier to split this code up into a core and per-cpu drivers to make driver addition easier, and the core smaller. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: PWM API support.Ben Dooks
Add support for PWM in the S3C24XX series of SoC via the PWM API. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C2412: Correct parents for EREFCLK and UREFCLKMatthieu Castet
For s3c2412, set parent for clk_erefclk and clk_urefclk. This allow for example to use xtal or extclk for i2s clock. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
2008-07-03[ARM] VR1000: Add tmp101 to list of I2C devices on the boardBen Dooks
Add tmp101 support via the new style I2C driver registration on the VR1000. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] ANUBIS: Add i2c device list to Simtec AnubisBen Dooks
Add i2c board info initialiser to setup the list of I2C devices present on an Simtec Anubis. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] VR1000: Add i2c device list to Thorcom VR1000Ben Dooks
Add i2c board intialisers to specify the I2C devices attached on the Thorcom VR1000. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] BAST: Add i2c device list on Simtec BastBen Dooks
Add i2c boardinfo for the connected i2c devices on the Simtec Bast. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] OSIRIS: Add i2c device list to Simtec OsirisBen Dooks
Add an i2c board information initialisers to the board to define which devices are present. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: Add physmap device for all Simtec NOR equiped boards.Ben Dooks
Move to using the physmap platform device code to attached NOR flash on Simtec boards so that the old bast-flash driver can be safely removed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] ANUBIS: Move to using ata_platform driver (libata)Ben Dooks
Change the (as yet unused) IDE bus on the Simtec Anubis board to use pata_platform and thus libata to provide IDE support. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] BAST/VR1000: Move to using ata_platform (libata)Ben Dooks
Use the pata_platform driver to provide the IDE port drivers on the Simntec BAST and Thorcom VR1000 machines as a precursor to removing drivers/ide/arm/bast-ide.c This will mean that the system will need SCSI and SCSI disc support as a minimum, and any references to hdX will be changed to sdX. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add power off on shutdown supportBen Dooks
Add pm_power_off hook to allow the Logitech Jive to shutdown when asked to halt. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add i2c device info for LIS302DL sensorBen Dooks
Add i2c bus definition for the LIS302DL sensor driver which is connected on the i2c bus. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add board definitions for audioBen Dooks
Add board definitions for the audio device connected on the Logitech Jive. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add LCD display setup informationBen Dooks
Add the setup information for the LCD display connected to the device. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add SPI bus definitions for LCD controllerBen Dooks
Add the definitions for the VGG2432A4 intelligent LCD display conneected via an GPIO-based SPI bus on the Logitech Jive. Signed-of-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add setup information for the S3C2412 LCD controllerBen Dooks
Setup the video controller information for the Jive. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Initialise the sleep configuration registersBen Dooks
Ensure that the S3C2412 sleep configuration registers are approriately setup so that the device can safely go to sleep. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Initial machine support for Logitech JiveBen Dooks
This is the base machine support for the Logitech Jive machine. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: Support for PWM timer clocks via clk_* APIBen Dooks
Add support for the PWM timer clock routing via the standard clk_ API. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: Add gpiolib supportBen Dooks
Add support for gpilib on all S3C24XX platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: enable USB subset of driversBen Dooks
Enable a subset of USB drivers which are useful for using on these devices. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: add SCSI supportBen Dooks
Enable SCSI support, mainly to help with adding USB storage support later and for the imminent changes for libata. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update networking optionsBen Dooks
Add the following to the networking confgiuration: 1) Packet socket support (useful for userland dhcp) 2) Add bluetooth and USB bluetooth drivers as modules 3) Add basic IPv6 support as modules. 4) Add the wireless core as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update miscellaneous optionsBen Dooks
Add some basic config filesystem, ensure errors are verbose by default. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update filesystem optionsBen Dooks
Enable new filesystem options, such as: - JFFS2 summary nodes - Ext2/3 externed options - Standard CDROM filesystems Also add NTFS as a module. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: enable useful NLS optionsBen Dooks
Enable some useful NLS codepages to be built into the kernel, and build the rest as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update list of used driversBen Dooks
Update the drivers built, such as the SM501 and parallel port. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update to rc8Ben Dooks
Update the s3c2410_defconfig to rc8 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C2410: Fix flags on DM9000 resources on BAST and VR1000Ben Dooks
Fix the flags entries for the DM9000 IRQ entries on both the Simtec BAST and Thorcom VR1000 board. The current entries use the IRQF_ flags, but we should be using the IORESOURCE_IRQ_ definitions. Signed-off-by: Ben Dooks <ben-linux@fluff.org> PATCH FOLLOWS KernelVersion: 2.6.26-rc5
2008-06-11[ARM] 5077/1: spi: fix list scan success verification in PXA ssp driverGuennadi Liakhovetski
The list search success check in arch/arm/mach-pxa/ssp.c is wrong: for example, it didn't recognise failure for me when I requested port 0. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] pxa: fix tosa.c build errorRussell King
Work around: arch/arm/mach-pxa/tosa.c: In function `tosa_poweroff': arch/arm/mach-pxa/tosa.c:470: error: `GPIO_OUT' undeclared (first use in this function) arch/arm/mach-pxa/tosa.c:470: error: (Each undeclared identifier is reported only once arch/arm/mach-pxa/tosa.c:470: error: for each function it appears in.) The proper fix exists in the PXA branch of my kernel git tree, which will be pushed during the next merge window. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5066/2: EM-X270: Fix DM9000 IRQ flags initialisationMike Rapoport
Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5065/2: CM-X270: Fix DM9000 IRQ flags initialisationMike Rapoport
Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-01[ARM] 5062/1: pxa: remove unused definition of CONFIG_ARCH_COTULLA_IDPeric miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23[ARM] integrator: fix build warnings and errorsRussell King
Fix resource_size_t warning in impd1.c, and printascii() build errors in pci_v3.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23Revert "[ARM] pxa: spitz wants PXA27x UDC definitions"Russell King
This reverts commit 53491e042e79578765e2d33512a45d50eb0d8801, which hit the kernel tree too early. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23[ARM] 5052/1: export clock functions for the at91x40Greg Ungerer
Export the AT91 clock functions for the AT91X40. Some external code common to all AT91 family parts relys on this, like the gpio and serial support. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] omap: fix omap clk support build errorsRussell King
arch/arm/plat-omap/clock.c:397: warning: "struct cpufreq_frequency_table" declared inside parameter list arch/arm/plat-omap/clock.c:397: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/plat-omap/clock.c: In function `clk_init_cpufreq_table': arch/arm/plat-omap/clock.c:402: error: structure has no member named `clk_init_cpufreq_table' arch/arm/plat-omap/clock.c:403: error: structure has no member named `clk_init_cpufreq_table' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X.Ben Dooks
Rename the SDI device if on an S3C2440 or S3C2442. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisationBen Dooks
Add the IRQF_TRIGGER_ type to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5040/1: BAST: Fix DM9000 IRQ flags initialisationBen Dooks
Add the IRQF_TRIGGER_ type to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.cTony Lindgren
As noted by Russell King. These depend on tsc210x drivers getting integrated first. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5025/2: fix collie cpu initialisationThomas Kunze
collie.h: * add some meaningfull names to some gpios collie.c: * initialize cpu registers correctly Signed-off-by: Thomas Kunze <thommycheck@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] return to old errno choice in mkdir() et.al. [Patch] fs/binfmt_elf.c: fix wrong return values [PATCH] get rid of leak in compat_execve() [Patch] fs/binfmt_elf.c: fix a wrong free [PATCH] avoid multiplication overflows and signedness issues for max_fds [PATCH] dup_fd() part 4 - race fix [PATCH] dup_fd() - part 3 [PATCH] dup_fd() part 2 [PATCH] dup_fd() fixes, part 1 [PATCH] take init_files to fs/file.c
2008-05-17Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: spitz wants PXA27x UDC definitions [ARM] pxa: fix pxafb build when cpufreq is enabled [ARM] fix parenthesis in include/asm-arm/arch-omap/control.h [ARM] colibri: fix support for DM9000 ethernet device [ARM] arm/kernel/arthur.c: add MODULE_LICENSE [ARM] 5037/1: Orion: fix DNS323/Kurobox Pro PCI initialisation [ARM] 5034/1: fix arm{925,926,940,946} dma_flush_range() in WT mode [ARM] export copy_page [ARM] 5026/1: locomo: add .settype for gpio and several small fixes ARM: OMAP: Fixed comments on global PRM register usage ARM: OMAP: Add PARENT_CONTROLS_CLOCK flag to dpll5_m2_ck ARM: OMAP: PRCM fixes to ssi clock handling ARM: OMAP: Add fuctional clock enabler for iva2 ARM: OMAP: Fix 34xx to use correct shift values for gpio2-6 fclks ARM: OMAP: Keymap fix for palmte and palmz71 ARM: OMAP: Fix Unbalanced enable for IRQ in omap mailbox ARM: OMAP: DMA: Fix incorrect channel linking ARM: OMAP: Warn on disabling clocks with no users ARM: OMAP: Add calls to omap2_set_globals_*() ARM: OMAP: Update MMC header to fix compile
2008-05-17Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2008-05-17Merge branch 'sa1100'Russell King
2008-05-17[ARM] pxa: spitz wants PXA27x UDC definitionsRussell King
... so include the header file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 15:00:19 +0000