aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2009-11-05RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statementsColin Tuckley
The platsmp.c file defines the REALVIEW_SYS_FLAGS* macros which are already present in platform.h. Just use the latter. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-05RealView: Add default memory configurationCatalin Marinas
This patch adds a realview_fixup() function called during booting to set up the memory banks. This way there is no need to pass a "mem=" argument on the kernel command line. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-05Check whether the SCU was already initialisedCatalin Marinas
If Linux is running in non-secure mode, this register may have been already initialised and writing to the control register not allowed. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-04ARMv7: Check whether the SMP/nAMP mode was already enabledTony Thompson
If running in non-secure mode, enabling this register will fault. Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com> Acked-by: Srinidhi Kasagar <srinidhikasagar@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-03at91: at91sam9g45 family: identify several chip versionsNicolas Ferre
cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2009-11-03Merge branch 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c ARM: S3C2440: mini2440: Fix spare warnings ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test ARM: S3C: Fix adc function exports ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set ARM: S3C24XX: Introduce S3C2442B CPU ARM: S3C24XX: Define a macro to avoid compilation error ARM: S3C: Add info for supporting circular DMA buffers ARM: S3C64XX: Set rate of crystal mux ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value
2009-11-02Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: ensure initial page tables are setup for SMP systems ARM: 5776/1: Check compiler version and EABI support when adding ARM unwind support. ARM: 5774/1: Fix Realview ARM1176PB board reboot ARM: Fix errata 411920 workarounds ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled ARM: Use GFP_DMA only for masks _less_ than 32-bit ARM: integrator: allow Integrator to be built with highmem ARM: Fix signal restart issues with NX and OABI compat
2009-11-02ARM: ensure initial page tables are setup for SMP systemsRussell King
Mapping the same memory using two different attributes (memory type, shareability, cacheability) is unpredictable. During boot, we encounter a situation when we're updating the kernel's page tables which can lead to dirty cache lines existing in the cache which are subsequently missed. This causes stack corruption, and therefore a crash. Therefore, ensure that the shared and cacheability settings matches the configuration that will be used later; this together with the restriction in early_cachepolicy() ensures that we won't create a mismatch during boot. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-02ARM: 5776/1: Check compiler version and EABI support when adding ARM unwind ↵Claudio Scordino
support. ARM unwind is known to compile only with EABI and not-buggy compilers. The problem is not the unwinding information but the -fno-frame-pointer option added as a result of !CONFIG_FRAME_POINTER. Now we check the compiler and raise a #warning in case of wrong compiler. Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-01ARM: 5774/1: Fix Realview ARM1176PB board rebootPhilby John
This is the fix for proper reboot of Realview ARM1176PB board when issuing the reboot command. Setting the eighth bit of control register SYS_RESETCTL to 1 to force a soft reset. arch_reset() is modified for realview machines to call machine specific reset function pointers. Signed-off-by: Philby John <pjohn@in.mvista.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-29ARM: Fix errata 411920 workaroundsRussell King
Errata 411920 indicates that any "invalidate entire instruction cache" operation can fail if the right conditions are present. This is not limited just to those operations in flush.c, but elsewhere. Place the workaround in the already existing __flush_icache_all() function instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-29ARM: Fix sparsemem with SPARSEMEM_EXTREME enabledRussell King
When SPARSEMEM_EXTREME is enabled, memory_present() wants to use bootmem to allocate data structures. However, we call memory_present() after declaring memory to bootmem, but before we've reserved areas. This leads to sparsemem data structures being overwritten later in the kernel's initialization (when slab initializes.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-29Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap4: Fix UART4 platform data on omap4 omap4: Allow omap_serial_early_init() for OMAP4430 board omap3: PM: enable UART3 module wakeups omap2: Fix console serial port number for n8x0 omap2: Fix detection of n8x0 omap1: Fix DSP public peripherals support for ams-delta omap1: Fix redundant UARTs pin muxing that can break other hardware support omap: iommu: fix wrong condition check for SUPERSECTION omap: SDMA: Fix omap_stop_dma() API for channel linking omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
2009-10-28ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.cBen Dooks
Fix sparse warning in arch/arm/mach-s3c2410/gpio.c due to missing include of <mach/gpio-fns.h>. Fixes the following warning: warning: symbol 's3c2410_gpio_irqfilter' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C2440: mini2440: Fix spare warningsBen Dooks
Fix the following sparse warnings in arch/arm/mach-s3c2440/mach-mini2440.c due to missing 'static'. warning: symbol 'mini2440_lcd_cfg' was not declared. Should it be static? warning: symbol 'mini2440_fb_info' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.cBen Dooks
Fix the following warnings from sparse in arch/arm/plat-s3c24xx/gpio. due to the missing include of <mach/gpio-fns.h> gpio.c:36:6: warning: symbol 's3c2410_gpio_cfgpin' was not declared. Should it be static? gpio.c:84:14: warning: symbol 's3c2410_gpio_getcfg' was not declared. Should it be static? gpio.c:103:6: warning: symbol 's3c2410_gpio_pullup' was not declared. Should it be static? gpio.c:125:5: warning: symbol 's3c2410_gpio_getpull' was not declared. Should it be static? gpio.c:138:6: warning: symbol 's3c2410_gpio_setpin' was not declared. Should it be static? gpio.c:157:14: warning: symbol 's3c2410_gpio_getpin' was not declared. Should it be static? gpio.c:184:5: warning: symbol 's3c2410_gpio_getirq' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOSTBen Dooks
Fix missing select of S3C_DEV_USB_HOST when building for mini2440 only. Fixes the following error: built-in.o: undefined reference to `s3c_device_usb` Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: Merge fixes-s3c64xx-dmaBen Dooks
Merge branch 'fixes-s3c64xx-dma' into fixes-s3c-2632-rc5
2009-10-28ARM: Merge fixes-s3c64xxBen Dooks
Merge branch 'fixes-s3c64xx' into fixes-s3c-2632-rc5
2009-10-28ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL testJulia Lawall
If the NULL test on buf is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C: Fix adc function exportsRyan Mallon
Fix the export of s3c_adc_read. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> [ben-linux@fluff.org: remove unexport of s3c_adc_start, needed for ts] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not setBen Dooks
Fix the link errors if cpu-frequency support is enabled on s3c2410 systems but there is no CONFIG_S3C2410_IOTIMING set. Fix this by ensuring the relevant symbols are defined NULL if the code is not being built in. Fixes the following error: arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_get' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_set' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_calc' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C24XX: Introduce S3C2442B CPUHarald Welte
Add the S3C2442B CPU ID to aid support the Openmoko GTA02 / Freerunner. Signed-off-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net> [ben-linux@fluff.org: edit description for clarity and S3C2442B as uppercase] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C24XX: Define a macro to avoid compilation errorRamax Lo
Define a macro to avoid the following error during kernel build process for platforms other than s3c2410: arch/arm/plat-s3c24xx/cpu.c:84: error: ‘s3c2410a_init’ undeclared here (not in a function) Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C: Add info for supporting circular DMA buffersBen Dooks
The S3C64XX DMA implementation will work a lot better with the ability to enqueue circular buffers as the hardware can do it's own linked-list management. Add a function s3c_dma_has_circular() to show that the system can do this and a flag for the channel. Update the s3c24xx/s3c64xx I2S DMA code to deal with this. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Mark Brown <broonie@@opensource.wolfsonmicro.com>
2009-10-26ARM: S3C64XX: Set rate of crystal muxMark Brown
The current code assumes that the external clock mux will be set to the crystal. Set this up explicitly within the clock API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-26ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK valueKukjin Kim
Fix the values of S3C6400_CLKDIV0_ARM_MASK and S3C6410_CLKDIV0_ARM_MASK. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-25ARM: Use GFP_DMA only for masks _less_ than 32-bitRussell King
We were using GFP_DMA for masks other than 0xffffffff, which is wrong when some masks are initialized to 0xffffffffffffffff. This caused such masks to obtain memory from the precious DMA pool. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25ARM: integrator: allow Integrator to be built with highmemRussell King
This fixes Integrator builds with highmem enabled; we need to translate from 'struct page' to a DMA address, and this is not possible without __pfn_to_bus(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-25ARM: Fix signal restart issues with NX and OABI compatRussell King
The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara <saeed.bishara@gmail.com> Tested-by: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-22omap4: Fix UART4 platform data on omap4Santosh Shilimkar
This patch removes the unnecessary UART4 platform which is under data is wrong because of this There is a separate platform structure for UART4 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap4: Allow omap_serial_early_init() for OMAP4430 boardSantosh Shilimkar
This patch enables omap_serial_early_init() function for OMAP4430 SDP. Without this the bootup would throw oops in omap_serial_init(). Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections to enable omap_serial_early_init(). This ifndef cannot be removed until omap4 clock framework is implemented. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-By: Tony Lindgren <tony@atomide.com> Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap3: PM: enable UART3 module wakeupsKevin Hilman
UART3 is in the PER powerdomain. If PER goes idle/inactive independently of CORE, for UART3 to wakeup it must have its wakeup enable bits setup in PM_WKEN_PER. This patch enables these bits. The reason it works when PER and CORE work together is because when CORE goes inactive/retention, the IOPAD wakeups are enabled and trigger UART3 wakeup. Without this patch, when the UART inactivity timer fires for UART3, its clocks are disabled and it's unable to wakeup so will be unusable until PER is awoken by another source. Another way of testing is by keeping CORE on during suspend but allowing PER to hit retention # echo 3 > /debug/pm_debug/core_pwrdm/suspend then enter suspend # echo mem > /sys/power/state Without this patch, UART3 will be unable to wakeup the system. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap2: Fix console serial port number for n8x0Tony Lindgren
With the recent changes omap serial ports match the physical numbering like they should. Fix the kernel CMDLINE accordingly so console works. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap2: Fix detection of n8x0Tony Lindgren
Otherwise the machine_is_nokia_n8*() does not work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap1: Fix DSP public peripherals support for ams-deltaJanusz Krzysztofik
DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?) machines as long as old dspgateway code were present in the l-o tree. For several months it is no longer included, breaking support for McBSP1 based audio on Amstrad Delta, for example. This patch, derived from the old dspgateway code, corrects the problem for the board by simply taking the DSP out of reset state, I guess. That way, things should not break when a new dsp code is added to the tree, and the change can be reverted then. If there are any reports on McBSP1 or other DSP public peripherals not working for other OMAP1 machines (I've not heard of any for now), I can prepare a more general patch providing an extra include file with a helper function defined. Created and tested against linux-2.6.32-rc5 Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap1: Fix redundant UARTs pin muxing that can break other hardware supportJanusz Krzysztofik
Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart and OMAP_TAG_UART. This works for mach-omap2, but causes issues on mach-omap1 for some boards as the mach-omap1 serial.c was muxing pins based on the enabled_uart flag for 15xx. Fix this by muxing pins in board-*.c files for the 15xx boards for the uart ports that had enabled_uart flag set before the commit above. Tested on Amsdtrad Delta only. Note that in the future we should add support for powering down the uarts with a timer like mach-omap2/serial.c does. Otherwise the enabled uarts will be blocking retention-while-idle. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap: iommu: fix wrong condition check for SUPERSECTIONHiroshi DOYU
A bit (2 << 0) is set both on SECTION and SUPERSECTION. To identify SUPERSECTION correctly, other bits should be compared too. Reported-by: "Srinivas Pulukuru" <srinivas.pulukuru@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap: SDMA: Fix omap_stop_dma() API for channel linkingSantosh Shilimkar
OMAP sDMA driver API omap_stop_dma() doesn't really stop the dma when used in linking scenario. The DMA channel needs to be disabled before resetting the chain. Also fix clearing of the OMAP_DMA_ACTIVE status in the linked case. Cc: Hari n <hari.zoom@gmail.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-22omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 ↵Janusz Krzysztofik
boards that use matrix_keypad Only mach-omap2 boards are currently using matrix_keypad. Allow mach-omap1 boards to use the old style keypad.h without breaking. Created against linux-2.6.32-rc5. Compile tested with omap_3430sdp_defconfig and rx51_defconfig. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-21ARM: 5769/1: CPU_ARM920T: remove dead Maverick EP9312 URLHartley Sweeten
Remove the URL listed for Maverick EP9312 since it is not available and modify the help text appropriately. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21ARM: 5768/1: ep93xx: remove dead code in ep93xx_gpio_ab_irq_handler()Hartley Sweeten
Remove unnecessary code in ep93xx_gpio_ab_irq_handler(). The desc calculation for gpio port B was left in when the following commit was merged. commit d8aa0251f12546e9bd1e9ee1d9782d6492819a04 Author: Dmitry Baryshkov <dbaryshkov@gmail.com> Date: Thu Oct 9 13:36:24 2008 +0100 [ARM] 5298/1: Drop desc_handle_irq() It's not needed so remove it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21ARM: 5767/1: ep93xx: remove ep93xx_init_time() prototypeHartley Sweeten
Remove unused prototype for ep93xx_init_time(). This function is not defined in the kernel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21ARM: 5765/1: Updated U300 defconfigLinus Walleij
This updates the U300 to use all the drivers merged in during the 2.6.32 merge window. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-21ARM: 5766/1: Fix watchdog enabling for AT91SAM9G45Yegor Yefremov
The macro for the watchdog has been changed from CONFIG_AT91SAM9_WATCHDOG to CONFIG_AT91SAM9X_WATCHDOG due to AT91CAP9 chips support Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-17ARM: 5764/1: bcmring: add oprofile pmu supportLeo Chen
add oprofile pmu support for bcmring. Signed-off-by: Leo Hao Chen <leochen@broadcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-17Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-10-17[ARM] pxa/spitz: add gpio button support (fixes regression)Stanislav Brabec
Updating desc for lid keys and resending patch with proper comments: Define Spitz buttons as GPIO keys in a way compatible with the old driver: On/Off: As Suspend EV_PWR key Raw values of lid sensors SWA and SWB: As EV_SW switches SWA: Display Down SWB: Lid Closed Recommended user space decoding: SWA==0 & SWB==0: lid opened (landscape mode) SWA==1 & SWB==0: invalid (or mechanic race condition) SWA==0 & SWB==1: lid closed with display up (portrait mode or mechanic race condition while closing to display-less mode) SWA==1 & SWB==1: lid closed with display down (display-less mode) AK_INT remote trigger is not mapped as input event. Without complete remote driver and remote pull-up control it has no useful interpretation. Signed-off-by: Stanislav Brabec <utx@penguin.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-17[ARM] pxa/cm-x300: fix mmc numberingMike Rapoport
CM-X300 has libertas on mmc2 and SD card slot on mmc1. This patch fixes wrong MMC ports assignment. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-10-15Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2xxx clock: set up clockdomain pointer in struct clk OMAP: Fix race condition with autodeps omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop omap: Initialization of SDRC params on Zoom2 omap: RX-51: Drop I2C-1 speed to 2200 omap: SDMA: Fixing bug in omap_dma_set_global_params() omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig