aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2008-07-05i.MX27: Adding PCM038 platform supportJuergen Beisert
This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX27: Add ADS platform supportJuergen Beisert
This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add clock handling for i.MX27 CPUJuergen Beisert
Internal clock path handling for the i.MX27 CPU. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate. (means no "rate" member in the clock structure). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. TODO: - Check if the i.MX21 CPU can share the same code. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX27 CPU: Add basic i.MX27 CPU supportJuergen Beisert
Add basic i.MX27 CPU support Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX2 add support for mx2 in i.MX serial driverSascha Hauer
add support for mx2 in i.MX serial driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX2 family: Add basic device supportJuergen Beisert
This patch adds a few on-chip devices for i.MX21/i.MX27 procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add basic mach support (headers)Juergen Beisert
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add basic mach support (sources)Juergen Beisert
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add GPIO multiplexing supportJuergen Beisert
This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MXC arch: Simplify architecture's irq sourcesJuergen Beisert
Simplify architecture's irq headers and sources, to share these files between MXC3 and MXC2. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX3: Adapt mx31lite to new timer init styleJuergen Beisert
This patch converts the external "add_mx31lite-basic_defconfig.diff" to our MXC implementation. Note: This patch fixes a board reference only. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX3: Add basic support for LogicPD i.MX31 LiteKitDaniel Mack
This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack <daniel@caiaq.de> -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+)
2008-07-05MX31: add basic pcm037 board supportSascha Hauer
This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX3: Add a basic default config for the imx31ads (reference only)Juergen Beisert
Currently there is a mx31ads BSP file in the kernel, but no default config file. This patch adds a basic default config for the imx31ads but it is for test purposes only to ensure the i.MX2 patch stack doesn't break the i.MX3. Note: For reference only. This configuration is untested as I have no access to an mx31ads. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MXC family: Adding timer supportJuergen Beisert
This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC: add io multiplexing functions for mx3Sascha Hauer
This patch adds functions to use the io multiplexer on mx3 platforms. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC arch: Add gpio support for the whole platformJuergen Beisert
This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Daniel Mack <daniel@caiaq.de>
2008-07-05mxc: add MX3 support for i.MX internal UART driverSascha Hauer
This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX3: introduce clock APISascha Hauer
This patch introduces the clock API for for arch-mxc Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC family: Add clock handlingJuergen Beisert
Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05IMX: introduce clock APISascha Hauer
This patch introduces the clock API for i.MX and converts all in-Kernel drivers to use it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05IMX UART: remove statically initialized tablesSascha Hauer
This patch removes the statically initialized tables from the i.MX serial driver and makes the driver fully dependent on the information provided by the platform_device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC: do not include board specific header from architecture includeSascha Hauer
do not include board-mx31ads.h from hardware.h, instead include it directly only where needed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-06-30[ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_offCatalin Marinas
This patch annotates the platform_secondary_init function in arch/arm/mach-realview/platsmp.c with trace_hardirqs_off to avoid a warning when LOCKDEP and TRACE_IRQFLAGS are enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22[ARM] Export dma_sync_sg_for_device()Russell King
Noticed by Martin Michlmayr, this missing export prevents IEEE1394 from building with: ERROR: "dma_sync_sg_for_device" [drivers/ieee1394/ieee1394.ko] undefined! Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2008-06-11[ARM] 5077/1: spi: fix list scan success verification in PXA ssp driverGuennadi Liakhovetski
The list search success check in arch/arm/mach-pxa/ssp.c is wrong: for example, it didn't recognise failure for me when I requested port 0. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06ARM: OMAP: Correcting the gpmc prefetch control register addressThara Gopinath
Correcting the GPMC_PREFETCH_CONTROL register address Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-06-05ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irqJarkko Nikula
Channel should be marked active only when DMA is really started. Otherwise just omap_request_dma, omap_dma_link_lch and omap_dma_unlink_lch will cause incorrect dump_stack(). Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-06-02[ARM] pxa: fix tosa.c build errorRussell King
Work around: arch/arm/mach-pxa/tosa.c: In function `tosa_poweroff': arch/arm/mach-pxa/tosa.c:470: error: `GPIO_OUT' undeclared (first use in this function) arch/arm/mach-pxa/tosa.c:470: error: (Each undeclared identifier is reported only once arch/arm/mach-pxa/tosa.c:470: error: for each function it appears in.) The proper fix exists in the PXA branch of my kernel git tree, which will be pushed during the next merge window. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5066/2: EM-X270: Fix DM9000 IRQ flags initialisationMike Rapoport
Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5065/2: CM-X270: Fix DM9000 IRQ flags initialisationMike Rapoport
Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-01[ARM] 5062/1: pxa: remove unused definition of CONFIG_ARCH_COTULLA_IDPeric miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23[ARM] integrator: fix build warnings and errorsRussell King
Fix resource_size_t warning in impd1.c, and printascii() build errors in pci_v3.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23Revert "[ARM] pxa: spitz wants PXA27x UDC definitions"Russell King
This reverts commit 53491e042e79578765e2d33512a45d50eb0d8801, which hit the kernel tree too early. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23[ARM] 5052/1: export clock functions for the at91x40Greg Ungerer
Export the AT91 clock functions for the AT91X40. Some external code common to all AT91 family parts relys on this, like the gpio and serial support. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] omap: fix omap clk support build errorsRussell King
arch/arm/plat-omap/clock.c:397: warning: "struct cpufreq_frequency_table" declared inside parameter list arch/arm/plat-omap/clock.c:397: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/plat-omap/clock.c: In function `clk_init_cpufreq_table': arch/arm/plat-omap/clock.c:402: error: structure has no member named `clk_init_cpufreq_table' arch/arm/plat-omap/clock.c:403: error: structure has no member named `clk_init_cpufreq_table' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X.Ben Dooks
Rename the SDI device if on an S3C2440 or S3C2442. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisationBen Dooks
Add the IRQF_TRIGGER_ type to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5040/1: BAST: Fix DM9000 IRQ flags initialisationBen Dooks
Add the IRQF_TRIGGER_ type to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.cTony Lindgren
As noted by Russell King. These depend on tsc210x drivers getting integrated first. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22[ARM] 5025/2: fix collie cpu initialisationThomas Kunze
collie.h: * add some meaningfull names to some gpios collie.c: * initialize cpu registers correctly Signed-off-by: Thomas Kunze <thommycheck@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] return to old errno choice in mkdir() et.al. [Patch] fs/binfmt_elf.c: fix wrong return values [PATCH] get rid of leak in compat_execve() [Patch] fs/binfmt_elf.c: fix a wrong free [PATCH] avoid multiplication overflows and signedness issues for max_fds [PATCH] dup_fd() part 4 - race fix [PATCH] dup_fd() - part 3 [PATCH] dup_fd() part 2 [PATCH] dup_fd() fixes, part 1 [PATCH] take init_files to fs/file.c
2008-05-17Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: spitz wants PXA27x UDC definitions [ARM] pxa: fix pxafb build when cpufreq is enabled [ARM] fix parenthesis in include/asm-arm/arch-omap/control.h [ARM] colibri: fix support for DM9000 ethernet device [ARM] arm/kernel/arthur.c: add MODULE_LICENSE [ARM] 5037/1: Orion: fix DNS323/Kurobox Pro PCI initialisation [ARM] 5034/1: fix arm{925,926,940,946} dma_flush_range() in WT mode [ARM] export copy_page [ARM] 5026/1: locomo: add .settype for gpio and several small fixes ARM: OMAP: Fixed comments on global PRM register usage ARM: OMAP: Add PARENT_CONTROLS_CLOCK flag to dpll5_m2_ck ARM: OMAP: PRCM fixes to ssi clock handling ARM: OMAP: Add fuctional clock enabler for iva2 ARM: OMAP: Fix 34xx to use correct shift values for gpio2-6 fclks ARM: OMAP: Keymap fix for palmte and palmz71 ARM: OMAP: Fix Unbalanced enable for IRQ in omap mailbox ARM: OMAP: DMA: Fix incorrect channel linking ARM: OMAP: Warn on disabling clocks with no users ARM: OMAP: Add calls to omap2_set_globals_*() ARM: OMAP: Update MMC header to fix compile
2008-05-17Merge branch 'omap-fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2008-05-17Merge branch 'sa1100'Russell King
2008-05-17[ARM] pxa: spitz wants PXA27x UDC definitionsRussell King
... so include the header file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-17[ARM] colibri: fix support for DM9000 ethernet deviceMichael Abbott
Two changes are necessary to enable proper operation of the DM9000 device with the Colibri PXA 270 board: firstly, the IRQ type needs to be configured for rising edge interrupts, and secondly this configuration needs to be communicated through to the DM9000. [akpm@linux-foundation.org: remove set_irq_type() call as per ben-linux request] Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Cc: Daniel Mack <daniel@caiaq.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-17[ARM] arm/kernel/arthur.c: add MODULE_LICENSEAdrian Bunk
This patch adds the missing MODULE_LICENSE("GPL"). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-17[ARM] 5037/1: Orion: fix DNS323/Kurobox Pro PCI initialisationLennert Buytenhek
Whereas most Orion 5x machine support code would initialise the PCI subsystem with nr_controllers in their struct hw_pci set to 2, the DNS323 and Kurobox Pro machine support code had nr_controllers set to 1. This was presumably done because on those two machines, the PCI(-X) controller (nr == 1) isn't used, requiring initialisation of only the PCIe controller (nr == 0.) However, not initialising the PCI(-X) controller on boards that don't use it leads to a situation where both the PCIe and the PCI(-X) controller think that their root bus is zero, and it messes up IRQ assignment. This patch changes the DNS323 and Kurobox Pro support code to always use nr_controllers == 2. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 15:34:34 +0000