aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2006-12-01[ARM] 3959/1: AT91: Support for SAM9 USB and HCK clocksAndrew Victor
The bits used to select the USB clocks are different on the SAM9's. Add support for the HCK clocks on the AT91SAM9261. Patch from Patrice Vilchez & Nicolas Ferre Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01[ARM] 3957/1: AT91: Physically mapped flash on DK and EK boardsAndrew Victor
This patch converts the old CONFIG_MTD_PHYSMAP_ options to the new physmap API by creating a physmap platform device for the NOR flash found on the Atmel AT91RM9200-DK and AT91RM9200-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01[ARM] 3956/1: AT91: Carmeva board updateAndrew Victor
This patch updates the Carmeva board support: * Specify the MMC Write-protect and Detection pins. * Add configuration of SPI devices. Patch from Peer Georgi. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01[ARM] 3955/1: AT91: Clear timer interrupt when resumingAndrew Victor
Attached is a patch for at91rm9200_time.c which removes the 'BUG: soft lockup detected on CPU#0!' message when exiting suspended states. Patch from Savin Zlobec Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01[ARM] 3953/1: AT91: SAM9 platform devicesAndrew Victor
This patch includes the pin initialization, resource definition and registration of the platform_devices for the SAM9260 and SAM9261 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01[ARM] 3949/2: AT91: SAM9 timer driverAndrew Victor
Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3954/1: AT91: Update drivers for new headersAndrew Victor
This patch updates the drivers (and other files) which include the hardware headers. This fixes the breakage introduced in patches 3950/1 and 3951/1 (those patches were getting big). The AVR32 architecture uses the same serial driver and had its own copy of at91rm9200_pdc.h. Renamed it to at91_pdc.h Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3948/1: AT91: Initial support for AT91SAM9261 and AT91SAM9260Andrew Victor
This patch adds the initial support for the newer Atmel AT91SAM9261 and AT91SAM9260 processors. The code is based on, and makes use of, the existing AT91RM9200 support. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3946/1: AT91: at91_arch_reset and at91_extern_irqAndrew Victor
The external interrupt sources are different on the various AT91 processors. This patch introduces the global 'at91_extern_irq' variable that contains a bitset of the available external interrupt sources. The processor reset mechanism also differs on the various AT91 processors. This patch also adds a global 'at91_arch_reset' callback (from system.h) into the processor-specific code to perform the reset. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3945/1: AT91: Rename devices.cAndrew Victor
This patch renames the arch/arm/mach-at91rm9200/devices.c file to at91rm9200_devices.c. The file contains AT91RM9200-specific code, so we will need separate files for the SAM9 processors. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-26[ARM] Export smp_call_function()Russell King
smp_call_function() will be used with the MP/core oprofile support patch. Export it as _GPL. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-26[ARM] Add PM_LEGACY defaultsRussell King
Eliminate two warnings: kernel/power/pm.c:205: warning: 'pm_register' is deprecated (declared at kernel/power/pm.c:64) kernel/power/pm.c:206: warning: 'pm_send_all' is deprecated (declared at kernel/power/pm.c:180) by updating defconfig files to contain a sensible PM_LEGACY default. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-22[ARM] 3942/1: ARM: comment: consistent_sync should not be called directlyDan Williams
/* * Note: Drivers should NOT use this function directly, as it will break * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-20[ARM] ebsa110: fix warnings generated by asm/arch/io.hRussell King
Remove two warnings: drivers/serial/8250_early.c:136: warning: unused variable 'mapsize' include/linux/io.h:47: warning: passing argument 1 of '__readb' discards qualifiers from pointer target type Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-20[ARM] 3933/1: Source drivers/ata/KconfigMartin Michlmayr
ARM doesn't source drivers/Kconfig like most architectures do, so the newly added drivers/ata is currently not made available on ARM. SATA is used on some ARM machines, like the Thecus N2100, so we need to source drivers/ata/Kconfig. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-14[ARM] Remove OP_MAX_COUNTERRussell King
OP_MAX_COUNTER never referenced, and is a reminant of an earlier oprofile implementation. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-11[ARM] Remove PM_LEGACY=y from selected ARM defconfigsRussell King
Most ARM defconfigs don't actually need to have PM_LEGACY enabled. Disable it for ATEB9200, Collie, IXP4xx, OMAP H2, S3C2410 and Versatile. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-09[ARM] 3857/2: pnx4008: add devices' registrationVitaly Wool
This patch adds platform devices' registration for the devices which drivers either have been added to the mainline or on the way to. arch/arm/mach-pnx4008/core.c | 69 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-07[ARM] 3927/1: Allow show_mem() to work with holes in memory map.Ray Lehtiniemi
show_mem() was not correctly handling holes in the memory map. It was treating the freed sections of the map as though they contained valid struct page entries. This could cause incorrect debugging output or even a kernel panic. This patch keeps the struct meminfo around after system initialization so that show_mem() can use it when scanning memory. show_mem() now walks over each bank of each online node, rather than assuming that each node contains a single contiguous bank. Signed-off-by: Ray Lehtiniemi <rayl@mail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-07[ARM] 3926/1: make timer led handle HZ != 100David Brownell
The timer LED is unusable at HZ=large, since it's got a hard-wired value of 100 ticks per cycle; when HZ=1024 (for example) it's essentially always-on. This patch just makes that be HZ ticks per cycle. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3923/1: S3C24XX: update s3c2410_defconfig with new driversBen Dooks
Add the new drivers, such as SPI, LED and RTC core, to the s3c2410_defconfig. Signed-off-by: Ben Dooks <ben-linux@fluff.irg> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3922/1: S3C24XX: update s3c2410_defconfig to 2.6.19-rc4Ben Dooks
Update the s3c2410_defconfig to 2.6.19-rc4 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3921/1: S3C24XX: remove bast_defconfigBen Dooks
Remove the bast_defconfig, as it has not been updated since 2.6.13. The s3c2410_defconfig should be a good replacement. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3920/1: S3C24XX: Remove smdk2410_defconfigBen Dooks
Remove the smdk2410_defconifg as it is out of data and has not been touched since 2.6.11. Use the s3c2410_defconfig instead. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3918/1: ixp4xx irq-chip reworkKevin Hilman
This is a rework of the ixp4xx irq_chip implementation. The use of two irq_chip structures and potentially switching between them is a violation of the intended use of the IRQ framework. The current implementation does not work with current in-kernel spinlock debugging or lockdep due to lock recursion problems caused by calling set_irq_chip/handler from within the chip's set_irq_type(). This patch goes back to using one irq_chip structure and handling the differences between edge/level, normal/GPIO interrupts inside the ack/mask/unmask routines themselves. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-02[ARM] 3912/1: Make PXA270 advertise HWCAP_IWMMXT capabilityPaul Gortmaker
ARM patch 3756/1 added HWCAP_IWMMXT. This patch adds support for broadcasting that info via /proc/cpuinfo and sets it for the CPU features of the PXA270. I've booted 19rc3 on a pxa270 and confirmed that the /proc/cpuinfo shows "iwmmxt" in the Features. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-02[ARM] 3915/1: S3C2412: Add s3c2410_gpio_getirq() to general gpio.cBen Dooks
s3c2410_gpio_getirq() holds for the S3C2412 build, so ensure that it gets built for all the current S3C24XX architectures Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-02[ARM] 3917/1: Fix dmabounce symbol exportsKevin Hilman
dma_sync_single is no more (and to be removed in 2.7) so this export should be dma_sync_single_for_cpu. Also export dma_sync_single_for_device. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-29[ARM] 3914/1: [Jornada7xx] - Typo Fix in cpu-sa1110.c (b != B)Kristoffer Ericson
"K4S281632b-1H" should read "K4S281632B-1H" (As it does everywhere else). No more coffe! Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-29[ARM] 3913/1: n2100: fix IRQ routing for second ethernet portLennert Buytenhek
The second ethernet port on the Thecus n2100 was incorrectly assigned to XINT1 instead of the correct XINT3 (PCI INTB instead of INTD), which caused that port to be non-functional. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-29[ARM] Add KBUILD_IMAGE target supportRussell King
Add support for KBUILD_IMAGE on ARM. This takes the usual target specifiers (zImage/Image/etc) in the same way that powerpc does (iow, without the arch/arm/boot prefix). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] 3900/1: Fix VFP Division by Zero exception handling.Takashi Ohmasa
The SIGFPE signal should be generated if Division by Zero exception is detected. Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] 3899/1: Fix the normalization of the denormal double precision number.Takashi Ohmasa
The significand should be shifted until the value of bit [62] is 1 to normalize the denormal double number. Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] Add realview SMP default configurationRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28[ARM] Fix SMP irqflags supportRussell King
The IRQ changes a while back broke the build for SMP machines. Fix up the SMP code to use set_irq_regs/get_irq_regs as appropriate. Also, fix a warning in arch/arm/kernel/time.c where 'regs' becomes unused for SMP builds. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-27[PATCH] vmlinux.lds: consolidate initcall sectionsAndrew Morton
Add a vmlinux.lds.h helper macro for defining the eight-level initcall table, teach all the architectures to use it. This is a prerequisite for a patch which performs initcall synchronisation for multithreaded-probing. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> [ Added AVR32 as well ] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-24[ARM] Comment out missing configuration symbolsRussell King
HAS_TOUCHSCREEN_ADS7843_LH7 and HAS_TOUCHSCREEN_ADC_LH7 are referenced but not defined in the LH7A40x configuration. Comment them out to prevent them causing warnings. Marc Singer said: Feel free to remove the Kconfig lines. I'll add it back with the rest of the config entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-24[ARM] Fix breakage in 7281c248f797723f66244b7ecef204620f664648Russell King
A couple of missing semicolons. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (33 commits) [WATCHDOG] remove experimental on iTCO_wdt.c [WATCHDOG] Atmel AT91RM9200 rename. [WATCHDOG] includes for sample watchdog program. [WATCHDOG] watchdog/iTCO_wdt: fix bug related to gcc uninit warning [WATCHDOG] add ich8 support to iTCO_wdt.c (patch 2) [WATCHDOG] add ich8 support to iTCO_wdt.c [WATCHDOG] ioremap balanced with iounmap for drivers/char/watchdog/s3c2410_wdt.c [WATCHDOG] w83697hf/hg WDT driver - Kconfig patch [WATCHDOG] w83697hf/hg WDT driver - autodetect patch [WATCHDOG] w83697hf/hg WDT driver - patch 16 [WATCHDOG] w83697hf/hg WDT driver - patch 15 [WATCHDOG] w83697hf/hg WDT driver - patch 14 [WATCHDOG] w83697hf/hg WDT driver - patch 13 [WATCHDOG] w83697hf/hg WDT driver - patch 12 [WATCHDOG] w83697hf/hg WDT driver - patch 11 [WATCHDOG] w83697hf/hg WDT driver - patch 10 [WATCHDOG] w83697hf/hg WDT driver - patch 9 [WATCHDOG] w83697hf/hg WDT driver - patch 8 [WATCHDOG] w83697hf/hg WDT driver - patch 7 [WATCHDOG] w83697hf/hg WDT driver - patch 6 ...
2006-10-20[PATCH] one more ARM IRQ fixAdrian Bunk
Fix one more compile breakage caused by the post -rc1 IRQ changes. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[ARM] switch to new pci_get_bus_and_slot APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-16[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-15[ARM] Fix fallout from IRQ regs changesRussell King
Some ARM platforms were still broken as a result of the IRQ register passing changes, mostly due to a missing linux/irq.h include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-14[ARM] 3889/1: [Jornada7xx] Addition of correct SDRAM params into cpu-sa1110.cKristoffer Ericson
This adds correct sdram params for K4S281632B-1H and sets the jornada to use them by default. Signed-off-by: Kristoffer Ericson Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-13[WATCHDOG] Atmel AT91RM9200 rename.Andrew Victor
The new Atmel AT91SAM9261 and AT91SAM9260 processors use a different internal watchdog peripheral. This watchdog driver is therefore AT91RM9200-specific. This patch renames at91_wdt.c to at91rm9200_wdt.c, and changes the name of the configuration option. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2006-10-11[PATCH] remove bogus arch-specific syscall exportsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] arm-versatile iomem annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] arm __user annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-09IRQ: Use the new typedef for interrupt handler function pointersDavid Howells
Use the new typedef for interrupt handler function pointers rather than actually spelling out the full thing each time. This was scripted with the following small shell script: #!/bin/sh egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* | while read i do echo $i perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $? done Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-08[PATCH] arm: it's OK to pass pointer to volatile as iounmap() argument...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 22:37:54 +0000