aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-01-22Merge branch 'gta02-machine-2.6.32' into gta02-machine-devices-2.6.32Lars-Peter Clausen
Conflicts: arch/arm/mach-s3c2442/include/mach/gta02.h arch/arm/mach-s3c2442/mach-gta02.c
2010-01-22gta02: Configure pcf50633-gpio device and add a regulator device whichLars-Peter Clausen
represents the power switch in front of the gsm modem.
2010-01-22Replace glamo gpio probe callback with generic solution.Lars-Peter Clausen
2010-01-22Merge branch 'gta02-machine-2.6.32' into gta02-machine-devices-2.6.32Lars-Peter Clausen
2010-01-22Instead of adding a probe_completed callback to each an every driver install aLars-Peter Clausen
bus notify handler and handle this in a generic way.
2010-01-22Merge branch 'gta02-machine-2.6.32' into gta02-machine-devices-2.6.32Lars-Peter Clausen
Conflicts: arch/arm/mach-s3c2442/Kconfig arch/arm/mach-s3c2442/Makefile arch/arm/mach-s3c2442/mach-gta02.c
2010-01-17mach-gta02: Fix mmc regulator constrainsLars-Peter Clausen
2009-12-27gta02: Use correct touchscreen device.Lars-Peter Clausen
Fixes resume.
2009-12-21gta02: Specify valid_ops_mask for regulator consumers.Lars-Peter Clausen
2009-12-21Use dev_pm_opsLars-Peter Clausen
2009-12-11gta02: Select s3c_device_nandLars-Peter Clausen
2009-12-11gta02: Use hw pwm for power leds and vibrator.Lars-Peter Clausen
2009-12-11gta02: add support for platform_batteryPaul Fertser
This adds support for platform_battery driver which allows to specify a set of power supply properties and callbacks to acquire them. It is needed to support dumb batteries where all the information about their status can only be obtained by platform-specific actions such as specific ADC measurements, some guessimation etc. Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2009-12-11gta02: Replace platform backlight driver with pcf50633-backlight.Lars-Peter Clausen
2009-12-11Add touchscreen device.Nelson Castillo
Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
2009-12-11gta02: Add glamo mfd irq base to glamo resourcesLars-Peter Clausen
... and remove unused reset pin resource.
2009-12-11gta02: Set pcf50633 chg_ref_current_maLars-Peter Clausen
2009-12-11gta02: Add power supply consumers.Lars-Peter Clausen
2009-12-11gta02: Add battery driverLars-Peter Clausen
2009-12-07gta02: Add fiq handlerLars-Peter Clausen
2009-12-07Add jbt6k74 deviceLars-Peter Clausen
2009-12-07gta02: Add glamo deviceLars-Peter Clausen
2009-12-07Select usb host device.Lars-Peter Clausen
2009-12-06gta02: Disable hardware ECC unless we get instructed to enable itHolger Freyther
Early verions off uboot used for the gta02 flashed the nand with ecc information incompatible to s3c2442 hardware ecc. Disable hardware error correction by default, unless the bootloader explicitly enables it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-12-06gta02: request usb pullup pin before using it.Lars-Peter Clausen
2009-12-06gta02: Include mach/regs-gpioj.hLars-Peter Clausen
2009-12-06Select usb host device.Lars-Peter Clausen
2009-12-06Add power management devices.Lars-Peter Clausen
2009-12-06ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlierLars-Peter Clausen
On hardware revision 5 and earlier the leds found on the gta02 are missing a resistor and reading their gpio pin status will always return 0. So we have to shadow the led states in software. This is done by "hijacking" the gpio accessor functions for bank B. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-12-06ARM: gta02: Add LED supportLars-Peter Clausen
The gta02 has three leds which are connected though gpio pins and thus can get supported by using the generic leds-gpio driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-12-06ARM: gta02: Add button supportLars-Peter Clausen
The gta02 has two buttons which are connected to gpio pins and thus can get supported by using the generic gpio-keys driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2009-11-25Merge branch 'mach-types'Russell King
2009-11-25[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPATJean PIHET
Using OABI, the call to put_user in do_signal can fail causing the calling app to hang. The solution is to check if put_user fails and force the app to seg fault in that case. Tested with multiple sleeping apps/threads (using the nanosleep syscall) and suspend/resume. Signed-off-by: janboe <janboe.ye at gmail.com> Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-22Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-11-22[ARM] pxa/spitz: fix compile regression on spitzPavel Machek
If CONFIG_AKITA is not set, spitz fails to compile. It worked ok in rc5. Fix is one more ifdef... Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-20[ARM] pxa/cpufreq: fix index assignments for end markerDaniel Mack
I stumbled over two small things regarding the .index field assignment in the dynamically created cpu frequency tables for pxa2xx and pxa3xx. Even though that doesn't currently cause any problem, it should still be fixed in case the logic in the CPUFREQ core changes. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-20[ARM] kmap: fix build errors with DEBUG_HIGHMEM enabledRussell King
d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to always be defined. Solve this by providing invalid definitions for these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-18Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: cs should be positive in gpmc_cs_free() omap: fix unlikely(x) < y omap3: clock: Fixed dpll3_m2x2 rate calculation omap3: clock: Fix the DPLL freqsel computations omap: Fix keymap for zoom2 according to matrix keypad framwork
2009-11-18OMAP: cs should be positive in gpmc_cs_free()Roel Kluin
The index `cs' is signed, test whether it is negative before we release gpmc_cs_mem[cs]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18omap: fix unlikely(x) < yRoel Kluin
The closing parenthesis was not in the right location. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-17omap3: clock: Fixed dpll3_m2x2 rate calculationTero Kristo
Current calculation does not take into account any changes to M2 divisor, and thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by re-routing dpll3_m2x2 parent to dpll3_m2. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17omap3: clock: Fix the DPLL freqsel computationsRajendra Nayak
Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped track down this bug. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar <h-bayrakdar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values ARM: 5787/1: U300 COH 901 331 fixes ARM: Fix warning in sa1100-flash.c [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus [ARM] pxa: fix incorrect mfp_to_gpio() conversion [ARM] pxa/colibri: fix AC97 ifdefs and add missing include [ARM] pxa: fix missing underscores in mfp-pxa910.h [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
2009-11-16omap: Fix keymap for zoom2 according to matrix keypad framworkVimal Singh
Interpretation of 'row' and 'col' got reversed in matrix keymap framework. Also last element '0', present in keymap array, is no more needed. Correcting zoom2 keyboard keymap accordingly. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-16Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-11-17[ARM] pxa: ensure mfp is in correct range in mfp_{read,write}Roel Kluin
Ensure we do not read/write outside array boundaries with a negative index. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-17[ARM] pxa/hx4700: fix hx4700 touchscreen pressure valuesPaul Parsons
hx4700 touchscreen events were being dropped in ads7846_rx() because their pressure values consistently exceeded the platform maximum of 512; a sample of 256 pressure values were in the range 531 to 815. Doubling the platform maximum to 1024 allows hx4700 touchscreen events to pass the test. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-16Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2009-11-16ARM: 5787/1: U300 COH 901 331 fixesLinus Walleij
This will fix some small issues with the COH 901 331 RTC driver: - Interrupt is disabled after alarm so that we don't fire multiple interrupts. - We return 0 from the coh901331_alarm_irq_enable() ridding a compile warning. - We alter the name in the U300 device registry to match that of the driver so they sucessfully resolve. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 18:16:03 +0000