aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-01-20OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"Paul Walmsley
Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da caused clock initialization to fail on OMAP1 with "BUG: spinlock lockup on CPU#0" -- this is because omap1_select_table_rate() and omap1_round_to_table_rate() call clk_get_rate() with the clockfw spinlock held. Fix by accessing the rate directly from the internal clock framework functions. Thanks to Tony Lindgren <tony@atomide.com> for reporting and testing the fix. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2010-01-20OMAP4: clocks: Fix the clksel_rate struct DPLL divsRajendra Nayak
For all DPLL's the valid dividers are same as the values to be programmed in the register. 0 is an invalid value. The changes are generated by updating the script which autogenerates the file modifed in the patch. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-20OMAP4: PRCM: Fix the base address for CHIRONSS reg definesRajendra Nayak
The CHIRONSS has its own local PRCM module and the register defines need to use the CHIRONSS base and not the PRM base. The changes are generated by updating the script which autogenerates the file modifed in the patch. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-19OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in ↵Roel Kluin
omap_dma_unlink_lch() The same flag and bits were tested twice. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-19omap3: Fix cpu detectionTony Lindgren
We need to set the omap_chip.oc carefully for the clocks to work. To fix this, set the omap_chip.oc in omap3_check_features() based on the CONTROL_IDCODE and silicon revision registers. Also add handling for 34xx es3.1.2 as es3.1 for now. Fixes booting on at least overo board. Based on an earlier patch by Paul Walmsley <paul@pwsan.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-19omap: Fix functions for dynamic remuxing of pinsTony Lindgren
Make the omap_mux_read and write available for board code, and rename omap_mux_set_board_signals into omap_mux_write_array. Also add the related prototypes and comments into mux.h. In some cases we want to change the signals dynamically, mostly for power management. Note that we cannot use the signal names as they are set __init to save memory. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-19omap: Fix cmdline muxingTony Lindgren
Looks like cmdline muxing got broken at some point when we decided to limit muxing to __init code. Currently omap_mux_entry list is not yet initialized when we try to initialize cmdline muxing. Fix this by calling omap_mux_init_list() before calling omap_mux_set_cmdline_signals(). Reported-by: Philip Balister <philip@balister.org> Tested-by: Philip Balister <philip@balister.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-19OMAP3: clock: Remove unnecessarily .init initializers from OMAP3 clocksRussell King
The first thing that omap2_init_clksel_parent() does is check for a non-zero .clksel field in the struct clk. Therefore, it is pointless calling this function on clocks where the clksel field is unset. Remove init calls to omap2_init_clksel_parent() on clocks without a clksel field. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-19OMAP3: hwmod: Adding flag to prevent caching of sysconfig register.Thara Gopinath
In the current implementation the sysconfig value is read into _sysc_cache once and an actual update to the sysconfig register happens only if the new value paased is differnt from the one in _sysc_cache. _sysc_cache is updated only if _HWMOD_SYSCONFIG_LOADED is not set. This can lead to the follwing issue if off mode is enabled in modules which employs "always-retore" mechanism of context save and restore. a. The module sets the sysconfig register through omap_device_enable. Here _sysc_cache is updated with the value written to the sysconfig register and left. b. The power domain containig the module enters off mode and the module context is lost. c. The module in use becomes active and calls omap_device_enable to enable itself. Here a read of sysconfig register does not happen as _HWMOD_SYSCONFIG_LOADED flag is set. The value to be written to the sysconfig register will be same as the one written in step a. Since _sysc_cache reflects the previous written value an update of the sysconfig register does not happen. This means in modules which employs "always-restore" mechanism after off , the sysconfig regsiters will never get updated. This patch introduces a flag SYSC_NO_CACHE which if set ensures that the sysconfig register is always read into _sysc_cache before an update is attempted. This flags need to be set only by modules which does not do a context save but re-initializes the registers every time the module is accessed. This includes modules like i2c, smartreflex etc. Signed-off-by: Thara Gopinath <thara@ti.com> [paul@pwsan.com: tweaked to apply on a different head, added flag comment] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-19ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 ↵Tony Lindgren
and V7 comments The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec workTony Lindgren
The comments in arm_machine_restart() suggest that cpu_proc_fin() will clean and disable cache and turn off interrupts. This does not seem to be implemented for proc-v7.S, implement it the same way as for proc-v6.S. This also makes kexec work for v7. Note that a related TLB and branch traget flush patch is also needed to avoid kexec "crc error". Note that there are still some issues that seem to be related to L2 cache being on and causing occasional uncompress "crc error" with kexec. Anyways, this gets kexec mostly working on V7 for now. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot()Tony Lindgren
We need to do that if we tinker with the MMU entries. This fixes the occasional bug with kexec where the new fails to uncompress with "crc error". Most likely at least kexec on v6 and v7 need this fix. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-19ARM: 5884/1: arm: Fix DCC console for v7Tony Lindgren
Without this patch arch/arm/compressed/head.S defaults to generic DCC code that does not work for v7. For more information on the v7 DCC, see Cortex-A8 TRM "12.11.1 Debug communications channel". To use it with post 2.6.33-rc1 or later, you need to have: CONFIG_DEBUG_LL=y ONFIG_DEBUG_ICEDCC=y CONFIG_EARLY_PRINTK=y Earlier kernels need commit 93fd03a8c6728b58879f8af20ffd55d9c32a778b backported. Tested on omap3430. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels"Rabin Vincent
This reverts commit 14f0aa359365e8a93a77b71e3b840274b9b4dcb1. That commit was needed earlier because system call restarting for OABI (compat) required an executable stack and thus had problems with NX. Since ab72b00734ae4d0b ("ARM: Fix signal restart issues with NX and OABI compat") has reworked the code to not require an executable stack anymore, we can re-enable NX support for kernels with OABI (compat) support. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-18ARM: 5882/1: ARM: Fix uncompress code compile for different defines of ↵Tony Lindgren
flush(void) Because of the include of the decompress_inflate.c file from boot/compress/misc.c, there are different flush() defines: In file included from arch/arm/boot/compressed/misc.c:249: arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:138:29: error: macro "flush" passed 2 arguments, but takes just 0 Fix this by removing the define of flush() in misc.c for CONFIG_DEBUG_ICEDCC as it's already defined in mach/uncompress.h, and that is being included unconditionally. Also use a static inline function instead of define for mach-mxc and mach-gemini to avoid similar bug for those platforms. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-17ARM: fix badly placed mach/plat entries in Kconfig & MakefileRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-15Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: ARM: MINI2440: Fixup __initdata usage ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator ARM: S3C: NAND: Check the existence of nr_map before copying
2010-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix left/right horizontal scroll mapping Input: pmouse - move Sentelic probe down the list Input: add compat support for sysfs and /proc capabilities output Input: i8042 - add Dritek quirk for Acer Aspire 5610. Input: xbox - do not use GFP_KERNEL under spinlock Input: psmouse - fix Synaptics detection when protocol is disabled Input: bcm5974 - report ABS_MT events Input: davinci_keyscan - add device_enable method to platform data Input: evdev - be less aggressive about sending SIGIO notifies Input: atkbd - fix canceling event_work in disconnect Input: serio - fix potential deadlock when unbinding drivers Input: gf2k - fix &&/|| confusion in gf2k_connect()
2010-01-15ARM: MINI2440: Fixup __initdata usageBen Dooks
Remove some of the __initdata tags which are currently inappropriate for platform_device and some of the platform data. These can be returned once support for copying platform devices and data is added. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: MINI2440: Fix crash on boot due to improper __initdata qualifierUri Yosef
This patch fix mini2440 crash on boot due to improper __initdata qualifier on mini2440_led1_pdata. Signed-off-by: Uri Yosef <uri.yosef@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulatorMark Brown
Since the fixed voltage regulator grew support for GPIO based enables and GPIO 0 is valid on some systems we need to specify that there is no valid GPIO enable control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-14ARM: S3C: NAND: Check the existence of nr_map before copyingRamax Lo
Since the structure field nr_map is optional, we need to check whether the chip number map is provided to avoid unexpected NULL pointer exception. Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-13[ARM] Orion5x: add GPIO LED and buttons for wrt350n v2Dirk Teurlings
Signed-off-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-01-13[ARM] pxa: fix irq suspend/resume for pxa25xEric Miao
PXA25x does not have IPR registers, saving and restoring should happen only for pxa27x and pxa3xx. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-13[ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26xEric Miao
GPIO89_AC97_nRESET is really a PXA26x specific option and was incorrectly named. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-13[ARM] pxa/corgi: fix incorrect default GPIO for UDC VbusEric Miao
There is no such GPIO for udc vbus sensing, put '-1' instead of default '0' as '0' does mean a valid GPIO. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-01-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Ensure ARMv6/7 mm files are built using appropriate assembler options ARM: Fix wrong dmb ARM: 5874/1: serial21285: fix disable_irq-from-interrupt-handler deadlock ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boards ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.h ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes ARM: 5870/1: arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set ARM: 5868/1: ARM: fix "BUG: using smp_processor_id() in preemptible code" ARM: 5867/1: Update U300 defconfig ARM: 5866/1: arm ptrace: use unsigned types for kernel pt_regs [ARM] pxa: fix strange characters in zaurus gpio .desc ARM: add missing recvmmsg syscall number [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*() [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *' [ARM] pxa: enable L2 if present in XSC3 [ARM] pxa: do not enable L2 after MMU is enabled
2010-01-12ARM: Ensure ARMv6/7 mm files are built using appropriate assembler optionsRussell King
A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12ARM: Fix wrong dmbRussell King
The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-12MXC: Add AUDMUXv2 register decode to debugfsMark Brown
Since AUDMUX configuration appears to be one of the common stumbling blocks for people setting up i.MX audio try to provide some diagnostic information describing the current setup to assisist people in working out what's going on. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-11Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (26 commits) OMAP2 clock: dynamically allocate CPUFreq frequency table OMAP clock/CPUFreq: add clk_exit_cpufreq_table() OMAP2xxx OPP: clean up comments in OPP data OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled OMAP1 clock: remove __initdata from struct clk_functions to prevent crash OMAP1 clock: Add missing clocks for OMAP 7xx OMAP clock: remove incorrect EXPORT_SYMBOL()s OMAP3 clock: Add capability to change rate of dpll4_m5_ck OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not CORE_96M_FCLK OMAP3: clock: add clockdomains for UART1 & 2 OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space OMAP2xxx IO mapping: mark DSP mappings as being 2420-only ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access. OMAP2: remove duplicated #include omap3: EVM: Choose OMAP_PACKAGE_CBB omap3: Fix booting if package is uninitialized omap3: add missing parentheses omap3: add missing parentheses omap2/3: ZOOM: Correcting key mapping for few keys omap2/3: make serial_in_override() address the right uart port ...
2010-01-11arm: add support for LZO-compressed kernelsAlbin Tonnerre
- changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11mm: make totalhigh_pages unsigned longAndreas Fenkart
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11ARM: 5873/1: ARM: Fix the reset logic for ARM RealView boardsColin Tuckley
Extend the patch from Philby John to the other "RealView" boards. Rename the constants and offsets to reflect their actual functions. Cc: Philby John <pjohn@in.mvista.com> Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-10[ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on bootSaeed Bishara
Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-01-10ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.hSantosh Shilimkar
The file arch/arm/include/asm/cpu.h needs to include 'linux/cpu.h' to meet its dependency. Otherwise when using "struct cpuinfo_arm" and including just 'asm/cpu.h' throws below error - arch/arm/include/asm/cpu.h:16: error: field 'cpu' has incomplete type To fix this otherway, one can also include both linux/cpu.h and asm/cpu.h but it shoudn't be that way. So this patch fixes this by including the linux/cpu.h in asm/cpu.h, so that including alone asm/cpu.h is enough. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-10ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by ↵Peter Hüwe
missing includes This patch fixes a build failure [1] due to missing includes This should make the arm tree build again with lpd7a404_defconfig References: http://kisskb.ellerman.id.au/kisskb/buildresult/1983329/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-10ARM: 5870/1: arch/arm: Fix build failure for defconfigs without ↵Peter Hüwe
CONFIG_ISA_DMA_API set A lot of ARM-defconfigs (those without CONFIG_ISA_DMA_API set) fail to build [1][2][3] due to the changes of the patch [PATCH] PCI: Clean up build for CONFIG_PCI_QUIRKS unset by Rafael J. Wysocki (Sat, 2 Jan 2010 22:57:24 +0100) [4] as the referenced variable 'isa_dma_bridge_buggy' in asm/dma.h is enclosed by the CONFIG_ISA_DMA_API conditional all configs without this setting fail to build. I'm not sure wether moving the condition is the right way to solve the issue, but atleast it fixes the issue :) References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983354/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1983333/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/1983337/ [4] http://lkml.org/lkml/2010/1/2/102 Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-08Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
omap-fixes-for-linus
2010-01-08OMAP2 clock: dynamically allocate CPUFreq frequency tablePaul Walmsley
Dynamically allocate the CPUFreq frequency table on OMAP2xxx chips. This fixes some compilation problems, since the kernel may not know what chip it is running on until boot-time. This also reduces the size of the CPUFreq frequency table. Problem originally reported by Felipe Balbi <felipe.balbi@nokia.com>. Thanks also for comments on the patch from Felipe and Kevin. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-08OMAP clock/CPUFreq: add clk_exit_cpufreq_table()Paul Walmsley
A subsequent patch adds code on OMAP2xxx to dynamically allocate the CPUFreq frequency table in clk_init_cpufreq_table(), so for it to avoid a leak, it will need a corresponding function to free the memory. This patch adds clk_exit_cpufreq_table() with generic code to call a chip-specific variant inside the clockfw_lock spinlock via struct clk_functions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP2xxx OPP: clean up comments in OPP dataPaul Walmsley
Revise some of the comments in the OMAP2xxx OPP data for clarity. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2010-01-08OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabledFelipe Balbi
if we enable CPUFREQ we can't build omap2 for two reasons, one of them is fixed by the patch below. It's failing because the __must_be_array() check in ARRAY_SIZE() is failing and printing the following message: arch/arm/mach-omap2/clock2xxx.c:453: error: negative width in bit-field '<anonymous>' Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> [paul@pwsan.com: commit message updated; changed rate variable name] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP1 clock: remove __initdata from struct clk_functions to prevent crashCory Maccarrone
Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da added an __initdata decoration to the structure containing the clk_enable and clk_disable functions. Once init data was freed, these pointers went to null, and the next enable or disable call caused the kernel to crash. This change removes this decoration. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: patch manually split and commit message edited] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP1 clock: Add missing clocks for OMAP 7xxCory Maccarrone
This change adds in some missing clocks that were needed as a result of 526505... (OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c). Prior to this, it was just assumed that these clocks existed for all devices, and it was used directly instead of calling it out with a clock_get call or similar. So, not having the CK_7XX meant these clocks weren't being used anymore for omap 7xx devices, which broke things badly. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: commit message edited] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP clock: remove incorrect EXPORT_SYMBOL()sPaul Walmsley
The only symbols that should be exported are symbols that are to be called from loadable kernel modules, e.g., device drivers. In the context of plat-omap/clock.c, these should only be the Linux clock interface symbols as defined by include/linux/clk.h. Core code doesn't need these symbols to be exported. Also, clean up an old comment while here. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP3 clock: Add capability to change rate of dpll4_m5_ckTuukka Toivonen
Add necessary definitions to clock framework to allow changing dpll4_m5_ck rate. This is used by the camera code. Signed-off-by: Jouni Högander <jouni.hogander@nokia.com> Signed-off-by: Tuukka Toivonen <tuukka.o.toivonen@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not ↵Paul Walmsley
CORE_96M_FCLK The correct parent of the McBSP 2, 3, and 4 functional clocks is PER_96M_FCLK, not CORE_96M_FCLK. Fix this in the OMAP clock tree. Reported by Nicole Chalhoub <n-chalhoub@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Nicole Chalhoub <n-chalhoub@ti.com>
2010-01-08OMAP3: clock: add clockdomains for UART1 & 2Kevin Hilman
UART1 & 2 were missing clockdomains resulting in broken omap_hwmod init for these devices. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc spacePaul Walmsley
Commit 10db25fea4c11661070b97832b8cc3d2af495092 causes the following kernel messages during N800 boot (and presumably all other 2420 boards): [ 0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space Fix by remapping the IVA memory areas somewhere outside vmalloc space. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-13 11:24:39 +0000