aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-05-18gta02: Add fiq handlerLars-Peter Clausen
2010-05-17gta02: Add touchscreen deviceLars-Peter Clausen
2010-05-17gta02: Remove usage of pcf50633 gpio apiLars-Peter Clausen
This is the only user of the pcf50633 gpio api. Since the custom interface is going to be replaced with gpiolib all users need to be remove or replaced. It is safe to be remove it in this case since it is used used to turn a gpio off which is never going to be turned on. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2010-05-17gta02: Add pcf50633 backlight platform dataLars-Peter Clausen
2010-05-17Add jbt device.Lars-Peter Clausen
2010-05-17gta02: Add glamo deviceLars-Peter Clausen
2010-05-17gta02: Add wlan power management deviceLars-Peter Clausen
2010-05-17gta02: Add gsm power management deviceLars-Peter Clausen
2010-05-17gta02: Add gps power management deviceLars-Peter Clausen
2010-05-17gta02: Add bt power management deviceLars-Peter Clausen
2010-05-17gta02: Add notify handler to probe device childrenLars-Peter Clausen
On the gta02 we often have a child parent relationship between different devices. The child devices can only be probed after their parant has been. Instead of adding a probe completed handler to each device we handle this in a generic way with a bus notifier.
2010-05-17gta02: Configure pcf50633 gpios.Lars-Peter Clausen
2010-05-17gta02: Disable hardware ECC unless we get instructed to enable itHolger Freyther
Early verions off uboot used for the gta02 flashed the nand with ecc information incompatible to s3c2440 hardware ecc. Disable hardware error correction by default, unless the bootloader explicitly enables it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2010-05-17gta02: Include mach/regs-gpioj.hLars-Peter Clausen
2010-05-17gta02: request usb pullup pin before using it.Lars-Peter Clausen
2010-05-17gta02: Fix regulator valid_modes_opsLars-Peter Clausen
2010-05-17gta02: Select missing device symbols.Lars-Peter Clausen
Select usb host and nand device.
2010-05-17ARM: gta02: Add gpio bank B quirk for hardware revision 5 and earlierLars-Peter Clausen
On hardware revision 5 and earlier the leds found on the gta02 are missing a resistor and reading their gpio pin status will always return 0. So we have to shadow the led states in software. This is done by "hijacking" the gpio accessor functions for bank B. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2010-05-17ARM: gta02: Add LED supportLars-Peter Clausen
The gta02 has three leds which are connected though gpio pins and thus can get supported by using the generic leds-gpio driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2010-05-17ARM: gta02: Add button supportLars-Peter Clausen
The gta02 has two buttons which are connected to gpio pins and thus can get supported by using the generic gpio-keys driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2010-05-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes ARM: 6125/1: ARM TWD: move TWD registers to common header ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabled ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops ARM: 6106/1: Implement copy_to_user_page() for noMMU ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
2010-05-14DA830: fix USB 2.0 clock entrySergei Shtylyov
DA8xx OHCI driver fails to load due to failing clk_get() call for the USB 2.0 clock. Arrange matching USB 2.0 clock by the clock name instead of the device. (Adding another CLK() entry for "ohci.0" device won't do -- in the future I'll also have to enable USB 2.0 clock to configure CPPI 4.1 module, in which case I won't have any device at all.) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-12ARM: 6125/1: ARM TWD: move TWD registers to common headerSrinidhi Kasagar
This moves the TWD register set of MPcore to a common existing file so that watchdog driver can access it Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabledCatalin Marinas
The patch adds the ENDPROC declarations for the __copy_to_user_std and __clear_user_std functions. Without these, the compiler generates BXL to ARM when compiling the kernel in Thumb-2 mode. Reported-by: Kyungmin Park <kmpark@infradead.org> Tested-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMPCatalin Marinas
The standard I-cache Invalidate All (ICIALLU) and Branch Predication Invalidate All (BPIALL) operations are not automatically broadcast to the other CPUs in an ARMv7 MP system. The patch adds the Inner Shareable variants, ICIALLUIS and BPIALLIS, if ARMv7 and SMP. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache opsCatalin Marinas
The Snoop Control Unit on the ARM11MPCore hardware does not detect the cache operations and the dma_cache_maint*() functions may leave stale cache entries on other CPUs. The solution implemented in this patch performs a Read or Write For Ownership in the ARMv6 DMA cache maintenance functions. These LDR/STR instructions change the cache line state to shared or exclusive so that the cache maintenance operation has the desired effect. Tested-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6106/1: Implement copy_to_user_page() for noMMUCatalin Marinas
Commit 7959722 introduced calls to copy_(to|from)_user_page() from access_process_vm() in mm/nommu.c. The copy_to_user_page() was not implemented on noMMU ARM. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-08ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.cCatalin Marinas
Commit 31aa8fd6 introduced the __arm_ioremap_caller() function but the nommu.c version did not have the _caller suffix. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-07Merge branch 'v4l_for_2.6.34' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow
2010-05-06V4L/DVB: mx1-camera: compile fixUwe Kleine-König
This fixes a regression of 7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-06Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-05-06[ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.hJakob Viketoft
The use of mfp_cfg_t causes build errors without including <mach/mfp.h>. CC: stable@kernel.org CC: Daniel Mack <daniel@caiaq.de> Signed-off-by: Jakob Viketoft <jakob.viketoft@bitsim.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/spitz: fix On/off key name to fix warning during bootPavel Machek
On/Off contains slash in the name, which causes warning during boot. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: fix the incorrect cpu_is_pxa950()Haojian Zhuang
Fix the wrong variable used in cpu_is_pxa950(). Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: update cpuid pattern for pxa9xx in head.SHaojian Zhuang
Update CPUID pattern of PXA9xx in head.S and fix the duplicate entries for pxa935. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/viper: fix timeout usage for I2CWolfram Sang
The timeout value is in jiffies, so it should be using HZ, not a plain number. Assume with HZ=100 '100' means 1s here and adapt accordingly. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Marc Zyngier <maz@misterjones.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Shen <paul.shen@marvell.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/raumfeld: fix button nameDaniel Mack
"on/off button" was recently renamed to remove the slash character. Follow that change in the pin polarity detection as well. While at it, fix another cosmetic coding style flaw as well. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa/imote2: Fix iMote2 defconfigStefan Schmidt
- Bring in a CMDLINE that actually works and prints to the right tty - Compile-in JFFS2 to boot into rootfs - Remove unneeded options for Bluetooth and radio - Disable CPU_FREQ as it makes the flash driver fail Thanks Jonathan for spotting what I messed up. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06[ARM] pxa: add missing new line to regs-u2d.hIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-04ARM: 6093/1: Fix kernel memory printing for sparsememCatalin Marinas
The show_mem() and mem_init() function are assuming that the page map is contiguous and calculates the start and end page of a bank using (map + pfn). This fails with SPARSEMEM where pfn_to_page() must be used. Tested-by: Will Deacon <Will.Deacon@arm.com> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-03Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-05-01arch/arm/include/asm/elf.h: forward-declare the task-structAndrew Morton
iop32x_defconfig: In file included from include/linux/elf.h:7, from kernel/elfcore.c:1: arch/arm/include/asm/elf.h:101: warning: "struct task_struct" declared inside parameter list arch/arm/include/asm/elf.h:101: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01arch/arm/plat-pxa/dma.c: correct NULL testJulia Lawall
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y; statement S; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6076/1: SA1100: add processor check to sa1110-cpufreq driverDmitry Artamonow
Just to make sure that this driver won't run on StrongArm SA1100 when both SA1100 and SA1110 cpufreq drivers are built in (usually in multimachine config). SA1100 driver already has similar check. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6075/1: SA1100: fix wrong CPU type for h3100 and h3600Dmitry Artamonow
They have StrongARM SA1110, not SA1100. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6066/1: Fix "BUG: scheduling while atomic: swapper/0/0x00000002Santosh Shilimkar
This patch fixes the preempt leak in the cpuidle path invoked from cpu-hotplug. The fix is suggested by Russell King and is based on x86 idea of calling init_idle() on the idle task when it's re-used which also resets the preempt count amongst other things dump: BUG: scheduling while atomic: swapper/0/0x00000002 Modules linked in: Backtrace: [<c0024f90>] (dump_backtrace+0x0/0x110) from [<c0173bc4>] (dump_stack+0x18/0x1c) r7:c02149e4 r6:c033df00 r5:c7836000 r4:00000000 [<c0173bac>] (dump_stack+0x0/0x1c) from [<c003b4f0>] (__schedule_bug+0x60/0x70) [<c003b490>] (__schedule_bug+0x0/0x70) from [<c0174214>] (schedule+0x98/0x7b8) r5:c7836000 r4:c7836000 [<c017417c>] (schedule+0x0/0x7b8) from [<c00228c4>] (cpu_idle+0xb4/0xd4) # [<c0022810>] (cpu_idle+0x0/0xd4) from [<c0171dd8>] (secondary_start_kernel+0xe0/0xf0) r5:c7836000 r4:c0205f40 [<c0171cf8>] (secondary_start_kernel+0x0/0xf0) from [<c002d57c>] (prm_rmw_mod_reg_bits+0x88/0xa4) r7:c02149e4 r6:00000001 r5:00000001 r4:c7836000 Backtrace aborted due to bad frame pointer <c7837fbc> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01ARM: 6068/1: Fix build break with KPROBES enabledSantosh Shilimkar
With CONFIG_KPROBES enabled two section are getting created which leads to below build break. LOG: AS arch/arm/kernel/entry-armv.o arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:431: Error: symbol ret_from_exception is in a different section arch/arm/kernel/entry-armv.S:490: Error: symbol ret_from_exception is in a different section arch/arm/kernel/entry-armv.S:491: Error: symbol __und_usr_unknown is in a different section This was introduced by commit 4260415f6a3b92c5c986398d96c314df37a4ccbf Reported-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-30musb: fix power field to hold all possible valuesAjay Kumar Gupta
MUSB can supply upto 500mA such as, AM3517 and OMAP3EVM Rev >=E and thus the 'power' field has to hold values above 255. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB ARM: 6030/1: KS8695: enable console ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. ARM: 6023/1: update bcmring_defconfig to latest version and fix build error ARM: fix build error in arch/arm/kernel/process.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 13:34:12 +0000