aboutsummaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-01-11Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (26 commits) OMAP2 clock: dynamically allocate CPUFreq frequency table OMAP clock/CPUFreq: add clk_exit_cpufreq_table() OMAP2xxx OPP: clean up comments in OPP data OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled OMAP1 clock: remove __initdata from struct clk_functions to prevent crash OMAP1 clock: Add missing clocks for OMAP 7xx OMAP clock: remove incorrect EXPORT_SYMBOL()s OMAP3 clock: Add capability to change rate of dpll4_m5_ck OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not CORE_96M_FCLK OMAP3: clock: add clockdomains for UART1 & 2 OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space OMAP2xxx IO mapping: mark DSP mappings as being 2420-only ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access. OMAP2: remove duplicated #include omap3: EVM: Choose OMAP_PACKAGE_CBB omap3: Fix booting if package is uninitialized omap3: add missing parentheses omap3: add missing parentheses omap2/3: ZOOM: Correcting key mapping for few keys omap2/3: make serial_in_override() address the right uart port ...
2010-01-11arm: add support for LZO-compressed kernelsAlbin Tonnerre
- changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Russell King <rmk@arm.linux.org.uk> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11mm: make totalhigh_pages unsigned longAndreas Fenkart
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-08Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
omap-fixes-for-linus
2010-01-08OMAP2 clock: dynamically allocate CPUFreq frequency tablePaul Walmsley
Dynamically allocate the CPUFreq frequency table on OMAP2xxx chips. This fixes some compilation problems, since the kernel may not know what chip it is running on until boot-time. This also reduces the size of the CPUFreq frequency table. Problem originally reported by Felipe Balbi <felipe.balbi@nokia.com>. Thanks also for comments on the patch from Felipe and Kevin. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-08OMAP clock/CPUFreq: add clk_exit_cpufreq_table()Paul Walmsley
A subsequent patch adds code on OMAP2xxx to dynamically allocate the CPUFreq frequency table in clk_init_cpufreq_table(), so for it to avoid a leak, it will need a corresponding function to free the memory. This patch adds clk_exit_cpufreq_table() with generic code to call a chip-specific variant inside the clockfw_lock spinlock via struct clk_functions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP2xxx OPP: clean up comments in OPP dataPaul Walmsley
Revise some of the comments in the OMAP2xxx OPP data for clarity. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2010-01-08OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabledFelipe Balbi
if we enable CPUFREQ we can't build omap2 for two reasons, one of them is fixed by the patch below. It's failing because the __must_be_array() check in ARRAY_SIZE() is failing and printing the following message: arch/arm/mach-omap2/clock2xxx.c:453: error: negative width in bit-field '<anonymous>' Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> [paul@pwsan.com: commit message updated; changed rate variable name] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP1 clock: remove __initdata from struct clk_functions to prevent crashCory Maccarrone
Commit 52650505fbf3a6ab851c801f54e73e76c55ab8da added an __initdata decoration to the structure containing the clk_enable and clk_disable functions. Once init data was freed, these pointers went to null, and the next enable or disable call caused the kernel to crash. This change removes this decoration. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: patch manually split and commit message edited] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP1 clock: Add missing clocks for OMAP 7xxCory Maccarrone
This change adds in some missing clocks that were needed as a result of 526505... (OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c). Prior to this, it was just assumed that these clocks existed for all devices, and it was used directly instead of calling it out with a clock_get call or similar. So, not having the CK_7XX meant these clocks weren't being used anymore for omap 7xx devices, which broke things badly. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: commit message edited] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP clock: remove incorrect EXPORT_SYMBOL()sPaul Walmsley
The only symbols that should be exported are symbols that are to be called from loadable kernel modules, e.g., device drivers. In the context of plat-omap/clock.c, these should only be the Linux clock interface symbols as defined by include/linux/clk.h. Core code doesn't need these symbols to be exported. Also, clean up an old comment while here. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP3 clock: Add capability to change rate of dpll4_m5_ckTuukka Toivonen
Add necessary definitions to clock framework to allow changing dpll4_m5_ck rate. This is used by the camera code. Signed-off-by: Jouni Högander <jouni.hogander@nokia.com> Signed-off-by: Tuukka Toivonen <tuukka.o.toivonen@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not ↵Paul Walmsley
CORE_96M_FCLK The correct parent of the McBSP 2, 3, and 4 functional clocks is PER_96M_FCLK, not CORE_96M_FCLK. Fix this in the OMAP clock tree. Reported by Nicole Chalhoub <n-chalhoub@ti.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Nicole Chalhoub <n-chalhoub@ti.com>
2010-01-08OMAP3: clock: add clockdomains for UART1 & 2Kevin Hilman
UART1 & 2 were missing clockdomains resulting in broken omap_hwmod init for these devices. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc spacePaul Walmsley
Commit 10db25fea4c11661070b97832b8cc3d2af495092 causes the following kernel messages during N800 boot (and presumably all other 2420 boards): [ 0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space Fix by remapping the IVA memory areas somewhere outside vmalloc space. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2010-01-08OMAP2xxx IO mapping: mark DSP mappings as being 2420-onlyPaul Walmsley
Out of the three major OMAP2 chip types, OMAP2420, OMAP2430, and OMAP3430, we only map the IVA on OMAP2420. The memory mapping is not shared between OMAP2420 and OMAP2430, so it is inappropriate to label those macros as '24XX'; this patch changes them to '2420'. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access.Abhijit Pagare
In OMAP2/3 some of the clock-domains which did not have control facility were being falsely written to and read using the CM_CLKSTCTRL register though it did not exist for them. One check is added to remove this flaw. Signed-off-by: Abhijit Pagare <abhijitpagare@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-01-08OMAP2: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in arch/arm/mach-omap2/clock34xx.c arch/arm/mach-omap2/io.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-08Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chains
2010-01-08omap3: EVM: Choose OMAP_PACKAGE_CBBVaibhav Hiremath
Without this the kernel doesn't boot, it craches in omap_mux_package_fixup(), since the package_subset becomes NULL. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap3: Fix booting if package is uninitializedTony Lindgren
Otherwise bringing up new boards can be harder: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.33-rc2-00015-g0bc9c93-dirty #37) PC is at omap_mux_init+0xa4/0x3d8 LR is at omap_mux_init+0x3c/0x3d8 ... Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap3: add missing parenthesesRoel Kluin
`!' has a higher precedence than `&' so parentheses are required. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap3: add missing parenthesesRoel Kluin
not(!) has a higher precedence than bit and(&). Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap2/3: ZOOM: Correcting key mapping for few keysVimal Singh
Keys: 'right arrow', 'up arrow' and 'select' were mapped wrongly. This patch corrects them. This patch also adds one missing key present in the board, currently I added it as 'unknown' key, as I am not able to find proper description for this key. One key entry (r: 7, c: 5) is present in the keymap, which is really not present in the board, removing it. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap2/3: make serial_in_override() address the right uart portAlexander Shishkin
Commit f62349ee9788b1d94c55eb6c291d74a1f69bdd9e makes it possible to have some other than first uart port as ttyS0, which breaks the workaround serial_in_override() function which will try to address the first uart port (for ttyS0) and not the one that was initialized. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> CC: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap1: Fix compile for omap1_bl.cTony Lindgren
Commit 9905a43b made struct backlight_ops const. Omap was setting check_fb dynamically, which caused the following compile error: drivers/video/backlight/omap1_bl.c: In function 'omapbl_probe': drivers/video/backlight/omap1_bl.c:142: error: assignment of read-only variable 'omapbl_ops' Turns out pdata->check_fb is not being used, so just remove it to fix the compile. Cc: Emese Revfy <re.emese@gmail.com> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap1: Add 7xx clocks and pin muxes for SPICory Maccarrone
Commit 35c9049b27040d09461bc90928ad770be7ddf661 added drivers/spi/omap_spi_100k.c. This patch add the related clocks and pin muxing entries to make the driver work on omap7xx platforms. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap: Remove uninitialized warning for gpio.cTony Lindgren
Flags is not used on 15xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap: &&/|| confusion in iommu_put()Roel Kluin
obj can't be both NULL and be an error pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap: gpio: Simultaneously requested rising and falling edgeCory Maccarrone
Some chips, namely any OMAP1 chips using METHOD_MPUIO, OMAP15xx and OMAP7xx, cannot be setup to respond to on-chip GPIO interrupts in both rising and falling edge directions -- they can only respond to one direction or the other, depending on how the ICR is configured. Additionally, current code forces rising edge detection if both flags are specified: if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; This change implements a toggle function that will modify the ICR to flip the direction of interrupt for IRQs that are requested with both rising and falling flags. The toggle function is not called for chips and GPIOs it does not apply to through the use of a flip_mask that's added on a per-bank basis. The mask is only set for those GPIOs where a toggle is necessary. Edge detection starts out the same as above with FALLING mode first. The toggle happens on EACH interrupt; without it, we have the following sequence of actions on GPIO transition: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt 0x1 1 -> 0 (falling) No interrupt (set ICR to 0x0 manually) 0x0 0 -> 1 (rising) No interrupt 0x0 1 -> 0 (falling) Interrupt That is, with the ICR set to 1 for a gpio, only rising edge interrupts are caught, and with it set to 0, only falling edge interrupts are caught. If we add in the toggle, we get this: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt (ICR set to 0x0) 0x0 1 -> 0 (falling) Interrupt (ICR set to 0x1) 0x1 0 -> 1 ... so, both rising and falling are caught, per the request for both (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING). Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08omap: McBSP: Fix possible port lockoutJanusz Krzysztofik
In its current form, the omap_mcbsp_request() function can return after irq_request() failure without any cleanups, effectively locking out the port forever with clocks left running. Fix it. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-07ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chainsBen Dooks
There is a possibility of a loop happening in the PLL output clock chain on the S3C64XX series. clk_mpll's parent was set to be clk_mout_mpll, but this is fed from clk_fout_epll (which is also clk_mpll). clk_mpll is meant to be the output from the MPLL, and clk_mout_mpll is a seperate clock derived from the mux of clk_mpll and clk_fin_mpll and thus should be considered a seperate clock. Anything using clk_mpll directly really should not be relying on this being the clock that is eventually routed to a peripheral, so remove the loop and ensure that the clocks accurately represent the clock chain in the device. The clk_mpll is not being used outside of the s3c6400-clock.c code, so this change should not break anything else. Do the same for the EPLL. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-06Merge branch 'davinci-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: DaVinci: DM365: Add the device_enable for the DaVinci Keyscan davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinci davinci: da8xx/omap-l1: mark RTC as a wakeup source davinci: cp_intc: provide set_wake function Davinci VPFE Capture: Take i2c adapter id through platform data
2010-01-06DaVinci: DM365: Add the device_enable for the DaVinci KeyscanMiguel Aguilar
Adds the device_enable function to the DaVinci Keyscan platform data to setup the PINMUX configuration. It also removes #ifdef from the DM365 EVM board in order to load it properly as a module. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06davinci: enable ARCH_HAS_HOLES_MEMORYMODEL for DaVinciSekhar Nori
All DaVinci platforms include a DSP or co-processor for audio/video acceleration. While creating memory for the DSP/co-processor, system integrator can end up creating a hole in the memory map of the sort: <kernel memory> <hole (memory for DSP)> <kernel memory> This sort of configuration needs ARCH_HAS_HOLES_MEMORYMODEL enabled. See further details see this discussion on ARM linux mailing list: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html The patch is boot tested on OMAP-L138, DM6446 and DM355 EVMs Signed-off-by: Sekhar Nori <nsekhar@ti.com> CC: Sriramakrishnan <srk@ti.com> CC: Khasim Syed Mohammed <khasim@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06davinci: da8xx/omap-l1: mark RTC as a wakeup sourceSekhar Nori
On da850, RTC alarm is a wakeup source from deep sleep. Mark it as a wakeup source after the rtc platform device is registered. Without this patch, the rtc-omap driver suspends the RTC during the suspend sequence and hence it cannot wakeup the SoC. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06davinci: cp_intc: provide set_wake functionSekhar Nori
There is nothing special to be done for interrupts which can wakeup the device from sleep on CP-INTC, but not having a set_wake implemented prevents use of common drivers which expect this function to be implemented for all wakeup interrupt sources. This patch fixes the issue encountered when using the omap-rtc driver on DA850. On DA850 the RTC alarm interrupt is used to wake up the SoC from deep sleep mode. Without this patch, the disable_irq_wake throws an unbalanced wake disable warning while resuming because the previous enable call fails for lack of set_wake implementation. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06Davinci VPFE Capture: Take i2c adapter id through platform dataVaibhav Hiremath
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. So modified respective davinci board files. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-01-06Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) ARM: 5865/1: nuc900 ethernet driver needs mii ARM: 5864/1: Implement arch_reset() in NUC900 ARM: 5863/1: fix bugs of clock source of NUC900 ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_range imx/mx3: depend on USB_ULPI for otg_ulpi_create ARM: MX3: make CPU revision number detection work on all boards mx25: pdk: add platform code for FEC support mx25: add support for FEC on i.MX25 mx25: s/NO_PAD_CTL/NO_PAD_CTRL/ mx31moboard: fix usbh device names mx3: add support for the mt9v022 camera sensor to pcm037 platform mx27: mxt_td60: Remove not used UART pins [ARM] pxa/poodle: fix incorrect 'gpio_card_detect' of MMC [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot [ARM] pxa/ttc_dkb: remove duplicate macro definition [ARM] pxa/zeus: provide power-source information when APM is enabled [ARM] pxa/zeus: relax memory timings on Zeus ethernet ports [ARM] pxa/zeus: make internal zeus_get_pcb_info static [ARM] pxa/littleton: select CPU_PXA300 and CPU_PXA310 [ARM] pxa/littleton: add UART3 GPIO config ...
2010-01-05ARM: 5864/1: Implement arch_reset() in NUC900Li Jie
Implement arch_reset(), reboot from shell become possible. Signed-off-by: lijie <eltshanli@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-05ARM: 5863/1: fix bugs of clock source of NUC900Li Jie
This patch fix following bugs: 1. typo error, CLOCK_EVT_MODE_PERIODIC -> CLOCK_EVT_FEAT_PERIODIC 2. TCSR register of timer1 missed PRESCALE 3. timer1 should be enabled before register it to clock source. Signed-off-by: lijie <eltshanli@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-05ARM: 5858/1: Remove unused vma_vm_flags macro from v7wbi_flush_user_tlb_rangeBahadir Balban
Signed-off-by: Bahadir Balban <bbalban@b-labs.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-04Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-01-04imx/mx3: depend on USB_ULPI for otg_ulpi_createUwe Kleine-König
otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on CONFIG_USB_ULPI. So protect its usage by the same symbol. Moreover mxc_ulpi_access_ops needs CONFIG_MXC_ULPI. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04ARM: MX3: make CPU revision number detection work on all boardsWolfgang Denk
Commit 52939c03 (ARM: MX3: fix CPU revision number detection) started using the CPU's SREV register for revision number detection. This makes it mandatory to have a valid SPBA0 mapping. Add this to the global map_io code instead of adding multiple copies for each board. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested on Qong (EVB-Lite) Tested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx25: pdk: add platform code for FEC supportBaruch Siach
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx25: add support for FEC on i.MX25Baruch Siach
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx25: s/NO_PAD_CTL/NO_PAD_CTRL/Baruch Siach
NO_PAD_CTL is not defined anywhere. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx31moboard: fix usbh device namesValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-04mx3: add support for the mt9v022 camera sensor to pcm037 platformGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 01:26:07 +0000