aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/kernel
AgeCommit message (Collapse)Author
2009-06-22Blackfin: fix early crash when booting on wrong cpuRobin Getz
Make sure we process the kernel command line before poking the hardware, so that we can process early printk. This helps ensure that if you boot a kernel configured for a different processor, something will be left in the log buffer. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: decouple unrelated cache settings to get exact behaviorJie Zhang
The current cache options don't really represent the hardware features. They end up setting different aspects of the hardware so that the end result is to turn on/off the cache. Unfortunately, when we hit cache problems with the hardware, it's difficult to test different settings to root cause the problem. The current settings also don't cleanly allow for different caching behaviors with different regions of memory. So split the configure options such that they properly reflect the settings that are applied to the hardware. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: remove obsolete mcount support from I-pipe codePhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: convert interrupt pipeline to irqflagsPhilippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: fix accidental reset in some boot modesSonic Zhang
We read the SWRST (Software Reset) register to get at the last reset state, and then we may configure the DOUBLE_FAULT bit to control behavior when a double fault occurs. But if the lower bits of the register is already set (like UART boot mode on a BF54x), we inadvertently make the system reset by writing to the SYSTEM_RESET field at the same time. So make sure the lower 4 bits are always cleared. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: abstract irq14 lowering in do_irqMike Frysinger
Split out the optional IRQ14 lowering code to further simplify the asm_do_IRQ() function and keep the ifdef nest under control. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: simplify irq stack overflow checkingMike Frysinger
Take a page from x86 and abstract the stack checking out of the asm_do_IRQ() function so that the result is easier to digest. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: only build show_interrupts() when procfs is enabledMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: redo handling of bad irqsMike Frysinger
With the common IRQ code initializing much more of the irq_desc state, we can't blindly initialize it ourselves to the local bad_irq state. If we do, we end up wrongly clobbering many fields. So punt most of the bad irq code as the common layers will handle the default state, and simply call handle_bad_irq() directly when the IRQ we are processing is invalid. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: unify memory region checks between kgdb and trapsMike Frysinger
The kgdb (in multiple places) and traps code developed pretty much identical checks for how to access different regions of the Blackfin memory map, but each wasn't 100%, so unify them to avoid duplication, bitrot, and bugs with edge cases. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: convert irq/process to asm-genericMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-18Blackfin: pull in asm/io.h in ksyms for prototypesMike Frysinger
Make sure we pull in asm/io.h when exporting symbols for the I/O functions so we don't end up with a build failure due to missing prototypes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-16Merge branch 'akpm'Linus Torvalds
* akpm: (182 commits) fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset fbdev: *bfin*: fix __dev{init,exit} markings fbdev: *bfin*: drop unnecessary calls to memset fbdev: bfin-t350mcqb-fb: drop unused local variables fbdev: blackfin has __raw I/O accessors, so use them in fb.h fbdev: s1d13xxxfb: add accelerated bitblt functions tcx: use standard fields for framebuffer physical address and length fbdev: add support for handoff from firmware to hw framebuffers intelfb: fix a bug when changing video timing fbdev: use framebuffer_release() for freeing fb_info structures radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb? s3c-fb: CPUFREQ frequency scaling support s3c-fb: fix resource releasing on error during probing carminefb: fix possible access beyond end of carmine_modedb[] acornfb: remove fb_mmap function mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF mb862xxfb: restrict compliation of platform driver to PPC Samsung SoC Framebuffer driver: add Alpha Channel support atmel-lcdc: fix pixclock upper bound detection offb: use framebuffer_alloc() to allocate fb_info struct ... Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16mm: consolidate init_mm definitionAlexey Dobriyan
* create mm/init-mm.c, move init_mm there * remove INIT_MM, initialize init_mm with C99 initializer * unexport init_mm on all arches: init_mm is already unexported on x86. One strange place is some OMAP driver (drivers/video/omap/) which won't build modular, but it's already wants get_vm_area() export. Somebody should look there. [akpm@linux-foundation.org: add missing #includes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-13Blackfin: initial support for ftrace grapherMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: initial support for ftraceMike Frysinger
Just the basic ftrace support here -- mcount and the ftrace stub. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add preliminary support for STACKTRACEMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: update aedos-ipipe code to upstream 1.10-00Yi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: do not configure the UART early if on wrong processorRobin Getz
Before we configure the early UART, check to make sure we are running on the expected processor - otherwise, we cause problems by configuring pins that don't exist (and causing an infinite loop of faults). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: push down exception oops checkingMike Frysinger
Rather than maintain a duplicate list of valid exceptions we can take in the kernel both in the first if() check and the switch() check, delay the oops check to after the switch(). All valid exceptions will have returned by this point leaving only the invalid ones. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: fix trap_c() exit pathsMike Frysinger
The trap_c() code pushes the hardware trace status onto the stack, but doesn't always restore it when returning from some trap code paths. So unify the exit code paths to all head to the end of the function. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add blackfin_invalidate_entire_icache for SMP systemsSonic Zhang
The KGDB code uses this when switching processors to make sure the icache is in a valid state. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: include the cpu compiled version in /proc/cpuinfoRobin Getz
Since the compiled-for cpu revision can be significant, include it in the cpuinfo output along side the cpu revision we're currently running on. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add support for GENERIC_BUGMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: rename bfin_addr_dcachable to bfin_addr_dcacheableJie Zhang
The latter naming convention is much more common. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: only handle CPLB protection violations when MPU is enabledRobin Getz
We don't need to handle CPLB protection violations unless we are running with the MPU on. Fix the entry code to call common trap_c, and remove the code which is never run. This allows the traps test suite to run on older boards with the MPU disabled. URL: http://blackfin.uclinux.org/gf/tracker/5129 Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix sparseirq/kstat_irqs falloutMike Frysinger
The sparseirq changes (d7e51e66) played poorly with the Blackfin irqchip implementation as we're still using the old hardirq method. Our bad irq structure had a NULL kstat_irqs field so when all the common code tries to increment this field, everything goes big bada boom. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix unused warnings after nommu updateMike Frysinger
The massive nommu update (8feae131) left the local variable "vml" unused, so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: export the last exception cause via debugfsRobin Getz
We have some test code that runs in userspace that exercises the exception handling of the Blackfin pretty thoroughly. Part of the validation process is checking the exact exception triggered, so export the last one seen to userspace via debugfs when debugging is enabled for the test code to check. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix length checking in kgdb_ebin2memRoel Kluin
The kgdb_ebin2mem() was decrementing the count variable to do parsing, but then later still tries to use it based on its original meaning. So leave it untouched and use a different variable to walk the memory. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: kgdb: fix up error return valuesMike Frysinger
The Blackfin kgdb code was all passing back positive errno values when it really should have been using negative errno values. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: push access_ok() L1 attribute downMike Frysinger
There is no need for the L1 attribute to be on the prototype of the access_ok() function as all consumers of the function do not care where it lives -- they'll always use pcrel calls to get to it. This prevents pointless recompiles of most of the system when this config option changes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: convert early_printk EVT init to a loopMike Frysinger
The EVT registers are all contiguous in the memory map, so using a loop to initialize them all rather than hardcoding the list results in much better generated code (a hardware loop rather than a whole bunch of individual loads). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: rename Blackfin relocs according to the toolchainMike Frysinger
The latest Blackfin toolchain has fixed its relocation scheme to match other ports: always use R_BFIN_ prefix and capitalize everything. This brings the kernel in line with those fixes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: convert SMP to only use generic time frameworkGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: override default uClinux MTD addr/sizeMike Frysinger
Due to a processor anomaly (05000263 to be exact), most Blackfin parts cannot keep the embedded filesystem image directly after the kernel in RAM. Instead, the filesystem needs to be relocated to the end of memory. As such, we need to tweak the map addr/size during boot for Blackfin systems. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: update gptimers APIMichael Hennerich
First we fix the prototypes for functions that return boolean values by using "int" rather than "uint16_t". Then we introduce a get_gptimer_run() function for checking the current run status of a timer, and then we add a disable_gptimers_sync() function which parallels disable_gptimers() with corresponding normal "_sync" behavior. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: include system/processor info in dump messagesRobin Getz
People often copy & paste crash messages without surrounding context, so include common useful information like system/processor stats in the crash summary. This should smooth over the report/test cycle a bit more. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add workaround for anomaly 05000461Robin Getz
Returning too fast with a bad RETI can trigger false errors. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: make sure stack is accessible before dumping itRobin Getz
When displaying a crash dump, make sure accessing the stack is safe so we don't crash at the same time. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: make sure MPU CPLB for first 1k is marked as validRobin Getz
This way we properly catch and kill applications that jump to a NULL ptr. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add workaround for anomaly 05000287Graf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add support for gptimer0 as a tick sourceGraf Yang
For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: detect anomaly 05000274Sonic Zhang
Detect and reject operating conditions for anomaly 05000274 since the problem cannot be worked around in software. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: do not append newlines to panic() messagesMike Frysinger
The panic() function already handles newlines for us. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: delete unused sys_getpagesize() functionMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: work around anomaly 05000287Graf Yang
Make sure we work around anomaly 05000287 by configuring different port preferences for the data cache. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: punt useless GPIO init callMike Frysinger
This init code existed only to dump a printk(), and not even a useful one. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: annotate anomaly 05000119 in core DMA codeRobin Getz
Add a reminder note to avoid the DMA_DONE bit in our DMA core code. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix early L1 relocation crashRobin Getz
Our early L1 relocate code may implicitly call code which lives in L1 memory. This is due to the dma_memcpy() rewrite that made the DMA code lockless and safe to be used by multiple processes. If we start the early DMA memcpy to relocate things into L1 instruction but then our DMA memcpy code calls a function that lives in L1, things fall apart. As such, create a small dedicated DMA memcpy routine that we can assume sanity at boot time. Reported-by: Filip Van Rillaer <filip.vanrillaer@oneaccess-net.com> Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-23 13:13:21 +0000