aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf533
AgeCommit message (Collapse)Author
2008-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin arch: If we double fault, rather than hang forever, reset Blackfin arch: When icache is off, make sure people know it Blackfin arch: Fix bug - skip single step in high priority interrupt handler instead of disabling all interrupts in single step debugging. Blackfin arch: cache the values of vco/sclk/cclk as the overhead of doing so (~24 bytes) is worth avoiding the software mult/div routines Blackfin arch: fix bug - IMDMA is not type struct dma_register Blackfin arch: check the EXTBANKS field of the DDRCTL1 register to see if we are using both memory banks Blackfin arch: Apply Bluetechnix CM-BF527 board support patch Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer Blackfin arch: Add ISP1760 board resources to BF548-EZKIT Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 version Blackfin arch: add missing IORESOURCE_MEM flags to UART3 Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC(). Blackfin arch: Extend sram malloc to handle L2 SRAM. Blackfin arch: Remove useless config option. Blackfin arch: change L1 malloc to base on slab cache and lists. Blackfin arch: use local labels and ENDPROC() markings Blackfin arch: Do not need this dualcore test module in kernel. Blackfin arch: Allow ptrace to peek and poke application data in L1 data SRAM. Blackfin arch: Add ANOMALY_05000368 workaround Blackfin arch: Functional power management support ...
2008-07-14Blackfin arch: Fix bug - Kernel does not boot if re-program clocksMichael Hennerich
Don't write conflicting data to EBIU_SDBCTL after the SDRAM is configured. This can cause data corruption, since we might change SDRAM row and column addressing modes. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-24DM9000: Fixup blackfin after removing 2 resource usageLaurent Pinchart
The dm9000 driver accepts either 2 or 3 resources to describe the platform devices. The 2 resources case abuses the ioresource mechanism by passing ioremap()ed memory through the platform device resources. This patch removes converts boards that were using it to the 3 resources scheme. CC: Bryan Wu <cooloney@kernel.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-07Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFINMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-13[Blackfin] arch: rename bf5xx-flash to bfin-async-flashMike Frysinger
- move all kconfig board settings into board resources - fixup casting style according to lkml feedback - rewrite driver so that it can handle arbitrary of instances according to the declared platform resources Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-10[Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets ↵Mike Frysinger
mainlined Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Functional power management support: Add CPU and platform ↵Michael Hennerich
voltage scaling support Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-29i2c: Convert most new-style drivers to use module aliasingJean Delvare
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
2008-04-25[Blackfin] arch: Functional power management support: Remove broken cpu ↵Michael Hennerich
frequency scaling drivers Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: add Blackfin on-chip SIR IrDA driver supportGraf Yang
- add platform device resources in board files - add new bfin_sir.h to each machines Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Give the DMA base registers a more descriptive nameBernd Schmidt
The DMA base registers are available in a global named "base_addr" for every Blackfin variant. Give this a more descriptive name, and remove duplicate tables from some drivers. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Consistently export base_addr for all Blackfin variants.Bernd Schmidt
Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: theres no need to declare ram{end,start,base} in the head.S ↵Mike Frysinger
files theres no need to declare ram{end,start,base} in the head.S files when declaring them with the other memory related variables in setup.c is so much simpler/nicer Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: merge ip0x-specific board changesMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Resolve the clash issue of UART defines between blackfin ↵Graf Yang
headers and include/linux/serial_reg. Signed-off-by: Graf Yang <graf.yang@analog.com> Cc: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: add i2c board info struct and move to new-style i2c interfaceBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: conditionally enable flash resources since it requests the ↵Mike Frysinger
async memory bank Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: punt the simple ad5304 spi driver now that the generic ↵Mike Frysinger
spidev driver lets you do it from userspace Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-22[Blackfin] arch: add board resources for new simple-gpio char driverMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: fix bug - set right partition size in the board filesMike Frysinger
- set default u-boot partition size to 256k - modify the offset with the size change - use mtd defines (append for offset and full for size) where applicable rather than churning constants when we dont have to Signed-off-by: Grace Pan <grace.pan@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-09[Blackfin] arch: fix build fails only include header files when enabledMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: Encourage users to use the spidev character driver: Provide ↵Michael Hennerich
platform support - Enable kernel generic spidev driver for blackfin SPI ADC - spi_adc driver, document and test sample not synced Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch:Fix BUG [#3876] pfbutton test for BTN3 on bf533 don't show ↵Michael Hennerich
complete info - Buttons on the BF533-STAMP board are not inverted - Fix spurious GPIO Interrupt caused during set irq_type for edge triggered interrupts Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-06Rename: linux/pata_platform.h to linux/ata_platform.hJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-24[Blackfin] arch: use common flash driver to setup partitions rather than the ↵Mike Frysinger
bf5xx-flash driver Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-24[Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, ↵Bryan Wu
EZKIT-BF533 and EZKIT-BF561 boards Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: replace current blackfin specific pfbutton driver with ↵Michael Hennerich
kernel generic gpio key driver Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Added support for OpenCores Keyboard Controller to H8606 boardJavier Herrero
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: Added support for 8250-class UARTs in HV Sistemas H8606 ↵Javier Herrero
board, modification in 8250.c driver for correct compilation with Blackfin Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17Blackfin arch: Typo: "CONFIG_RTC_BFIN_MODULE" -> "CONFIG_RTC_DRV_BFIN_MODULE"Robert P. J. Day
i'm *reasonably* confident that this is a typo that should be fixed. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: relocate linux/usb_isp1362.h to linux/usb/isp1362.h like in ↵Mike Frysinger
newer linux trees Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: remove useless CONFIG_IRQCHIP_DEMUX_GPIOMike Frysinger
since we have this always turned on now and dont want it off (and hasnt been an option in a while) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: fix missing newline to fileMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: split board selection off into mach subdirsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-12Blackfin arch: move hard coded pin_req to board fileBryan Wu
Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time - move this static things to the blackfin board file - add pin_req array to struct bfin5xx_spi_master - tested on BF537/BF548 with SPI flash Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-30Blackfin arch: Fix bug set correct baud for spi mmc and enable SPI after DMA.Sonic Zhang
Changes: 1. The baud for spi mmc defined in board file is not used by the old spi driver. A slower value from spi framework is used instead. In latest bug fixing, the correct baud is use which is too high for spi MMC card. 2. SPI is enabled only after DMA is started. 3. MMC detection IRQ is set to 55. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: Apply Bluetchnix vendor patch provided by Harald KrapfenbauerMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: Added support for HV Sistemas H8606 boardJavier Herrero
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: use "char bfin_board_name[]" rather than "char ↵Mike Frysinger
*bfin_board_name" per discussion on lkml as the former uses less storage Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Don't take semaphore in cpufreq_quick_get() [CPUFREQ] Support different families in fid/did to frequency conversion [CPUFREQ] cpufreq_stats: misc cpuinit section annotations [CPUFREQ] implement !CONFIG_CPU_FREQ stub for cpufreq_unregister_notifier() [CPUFREQ] mark hotplug notifier callback as __cpuinit [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix) [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core [CPUFREQ] Longhaul - Add support for PM133 northbridge [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for
2007-10-04[CPUFREQ] move policy's governor initialisation out of low-level drivers ↵Thomas Renninger
into cpufreq core Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
2007-10-09Blackfin arch: Print out debug info, as early as possibleRobin Getz
Print out debug info, as early as possible - even before the kernel initializes the interrupt vectors. Now we can print out debug messages almost anytime during the boot process. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-27Blackfin arch: Remove cruft - CONFIG_DEBUG_SERIAL_EARLY_INIT didn't work ↵Robin Getz
that well with DEBUG_KERNEL_START Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-11Blackfin arch: rewrite our reboot code in CMike Frysinger
rewrite our reboot code in C rather than assembly to be like other architectures and to allow board maintainers to define custom behavior Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05Blackfin arch: allow people to select the feature that is unavailable to the ↵Mike Frysinger
kernel - allow people to select the feature that is unavailable to the kernel: NMI, JTAG, or CYCLES. - change default NMI handler to simply dump hardware trace buffer. - remove default NMI handler completely as calling into kernel code is not safe move example handler to wiki so people dont haphazardly copy and paste this stuff thinking its safe Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: Add ability to expend the hardware trace bufferRobin Getz
Add ability to expend the hardware trace buffer via a configurable software buffer - so you can have lots of history when a crash occurs. The interesting way we do printk in the traps.c confusese the checking script Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-03Blackfin arch: Fix CCLK and SCLK checksRobin Getz
Fix CCLK and SCLK checks, combine all arch checks into one file for maintance. Checkins that remove more lines than they add are always good. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: use HI/LO macros rather than masking the bit ranges ourselvesMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25Blackfin arch: revise anomaly handling by basing things on the compiler not ↵Mike Frysinger
the kconfig defines revise anomaly handling by basing things on the compiler not the kconfig defines, so the header is stable and usable outside of the kernel. This also allows us to move some code from preprocessing to compiling (gcc culls dead code) which should help with code quality (readability, catch minor bugs, etc...). Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 22:31:18 +0000