aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-common
AgeCommit message (Collapse)Author
2008-11-18Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crashGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz.Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: fix bug - kernel build with write back policy fails to be ↵Mike Frysinger
booted up Make sure IFLUSH is not the last instruction in the hardware loop to avoid infinite core stall. The dcache/icache function that only gets used in writeback mode was putting IFLUSH as the last instruction in the hardware loop ... we know from design that this may often lead to inifite core stalling, so switch the FLUSH/IFLUSH order. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix bug - dmacopy test case fail on all platformMike Frysinger
The cache code I added flushes 1 line too little if the start address is not aligned to the cache size. Cache align the start address so that when we straddle cache aligns, we get the right count. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: make sure cycles is marked as volatile so gcc doesnt reorder on us Blackfin arch: disable CONFIG_HW_RANDOM and CONFIG_DAB in defconfig files Blackfin arch: update cache flush prototypes with argument names to make them less mysterious Blackfin arch: move bfin_addr_dcachable() and friends into the cacheflush header where it belongs Blackfin arch: use the new bfin_addr_dcachable() function Blackfin arch: fix bug - build kernel failed at head.S when reprogram clock on all platforms Blackfin arch: unify/cleanup cache code Blackfin arch: update AD7879 platform resources in board file Blackfin arch: Zero out bss region in L1/L2 memory. Blackfin arch: add read/write IO accessor functions to Blackfin Blackfin arch: fix bug - some serial header files set RTS to an input when they should all be outputs
2008-10-16Blackfin arch: unify/cleanup cache codeMike Frysinger
- to be correct wrt to end ranges - to be optimal with a one-instruction hardware loop Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16Blackfin arch: Zero out bss region in L1/L2 memory.Graf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-15cpufreq: remove policy->governor setting in drivers initializationDominik Brodowski
As policy->governor is already set to CPUFREQ_DEFAULT_GOVERNOR in the (always built-in) cpufreq core, we do not need to set it in the drivers. This fixes the sparc64 allmodconfig build failure. Also, remove a totally useles setting of ->policy in cpufreq-pxa3xx.c. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-09Blackfin arch: Fix bug - HW Errors never recover on BF548Robin Getz
The kernel does not properly clear the EBIU Error Master (EBIU_ERRMST) Register on BF548, which causes the kernel to panic. We need to make sure that we clear the EBIU_ERRMST (necessary on BF54x) Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: give sys_strace proper entry markingsMike Frysinger
a global _sys_trace will cause the assembler to fail, it should be fixed in toolchain side firstly. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: Fix BUG -- BF533 + 0.5 silicon + MPU + UART PIO -> crashMichael Hennerich
Apply ANOMALY_05000283 & ANOMALY_05000315 Workaround also to the EXCEPTION path. Cover evt_ivhw also with ANOMALY_05000315 The Workaround needs to be prior to accesses (either read or write) to any system MMR. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Not call generic set_irq_handler() in bfin_gpio_irq_type() ↵Graf Yang
due to spinlock recursion Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Use DTEST rather than DMA to poke at L1 SRAM during exception ↵Robin Getz
context Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Modify some funtion names to more genernal onesGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: add a meaningful name for each irqchipGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13Blackfin arch: add supporting for kgdbSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: add supporting for double fault debug handlingRobin Getz
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-28Blackfin arch: Fix PM building on BF52x: No ROTWE on BF52x, add USBWEMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-27Blackfin arch: move include/asm-blackfin header files to arch/blackfinBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-25Blackfin arch: dont actually need to muck with EMAC_SYSTAT for BF52x for ↵Mike Frysinger
demuxing Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: hook up some missing new system callsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: do not muck with the UART during boot -- let the serial ↵Mike Frysinger
driver worry about it Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: clear EMAC_SYSTAT during IRQ init rather than early head.S as ↵Mike Frysinger
we dont need it setup that early Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: Print out doublefault addresses, so debug can occurRobin Getz
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: cleanup cache lock codeMike Frysinger
- remove cheesy read_iloc() function - move invalidate_entire_icache function to lock.S - export proper prototypes for functions in lock.S - only build lock.S when BFIN_ICACHE_LOCK is enabled Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-13Blackfin arch: workaround SIC_IWR1 reset bug, by keeping MDMA0/1 always ↵Michael Hennerich
enabled in SIC_IWR1. This way we ensure that reboot succeeds. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06Blackfin arch: Fix Bug - System with EMAC driver enabled - Core not idlingMichael Hennerich
- Disable all bits in SIC_IWR unless we are going into a real (DPMC) power saving mode. Any Interrupt can wake the core form it's idle state. - Remove deep sleep mode as it is not going to be used anywhere: We support sleep, sleep deeper and hibernate. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-13Blackfin arch: delete unused cache functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06Blackfin arch: unify the duplicated portions of __start and split ↵Mike Frysinger
mach-specific pieces into _mach_early_start where they will be easier to trim over time Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06Blackfin arch: add asm/thread_info.h for THREAD_SIZE defineMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06Blackfin arch: make sure the BSS and kernel load address are 4 byte alignedMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06Blackfin arch: unify the duplicated _real_start functionsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06Blackfin arch: remove support for Anomaly 05000125 as it doesnt exist on any ↵Mike Frysinger
supported processor/silicon Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: Fix bugs - Make kgdb code apparent to app debugging.Sonic Zhang
- Skip single step if global interrupt disable bit is set. - Extend bernds' patch r4673 to skip single step in any interrupt entry that interrupts the code which is under single stepping. Bernds' patch only allow user space single stepping. Singed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: Functional power management supportMichael Hennerich
Merge VR Regulator Hibernate wakeups into set_irq_wake for internal interrupts. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: Fix bug - This change eliminates impact on application debuggingJie Zhang
Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-26Blackfin arch: Fix bug - skip single step in high priority interrupt handler ↵Sonic Zhang
instead of disabling all interrupts in single step debugging. Skip single step if event priority of current instruction is higher than that of the first instruction, from which gdb starts single step. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-16Blackfin arch: use local labels and ENDPROC() markingsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-19Blackfin arch: Functional power management supportMichael Hennerich
Enable: PM_SUSPEND_MEM -> Blackfin Hibernate to SDRAM This feature requires a special bootloader (u-boot) supporting return from hibernate. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-14Blackfin arch: Remove redundant kernel optionMichael Hennerich
use kernel command line mem and max_mem bootargs to limit availabe memory instead. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-14Blackfin arch: Fix Bug - GPIO interrupts not disabled; edge sensitive ↵Michael Hennerich
interrupt hang system. - Implement irq_chip.enable and irq_chip.disable Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: fix gdb testing regressionBernd Schmidt
When transferring to IRQ5 from an exception, save SYSCFG in memory across the transfer and clear the trace bit. When we get a single step exception, check whether we can safely clear the trace bit in SYSCFG. We can (and should) clear it after the first instruction of the interrupt handler; the first insn saves SYSCFG to the stack in all handlers. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: In the double fault handler, set up the PT_RETI slotBernd Schmidt
In the double fault handler, set up the PT_RETI slot so that we print out the correct return address in the dumping code. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Support for CPU_FREQ and NOHZVitja Makarov
Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
2008-05-07[Blackfin] arch: Functional power management support: Add CPU and platform ↵Michael Hennerich
voltage scaling support Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07[Blackfin] arch: Cleanup Kconfig, fix comment and make sure we exclude ↵Michael Hennerich
CCLK=SCLK for some configurations Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Functional power management support: Add support for cpu ↵Michael Hennerich
frequency scaling Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Remove the circular buffering mechanism for exceptionsBernd Schmidt
Remove the circular buffering mechanism for exceptions. Instead, point RETX at a safe location from which to fetch three NOPs. This safe location is now in the fixed code area, and also used for certain anomaly workarounds, to ensure that user space can find a valid ICPLB when things are built with CONFIG_MPU. Also, save I/DCPLB_FAULT_ADDRESS when lowering to level 5, since the hardware reg is valid only at exception level. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Allow concurrent use of GPIO and GPIO IRQMichael Hennerich
The irq setup code no longer calls gpio request and free. This patch also changes the default gpio_free behavior on Blackfin. A freed GPIO keeps it's last state, and is not defaulted back to an input. This is also what all other architectures do. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: detect the memory available in the system on the fly by defaultMike Frysinger
detect the memory available in the system on the fly by default rather than forcing people to set this manually in the kconfig Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>