aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mm/init.c
AgeCommit message (Collapse)Author
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: catch hardware errors earlier during bootingRobin Getz
Allow hardware errors to be caught during early portions of booting, and leave something in the shadow console that people can use to debug their system with (to be printed out by the bootloader on next reset). This enables the hardare error interrupts in head.S, allowing us to find hardware errors when they happen (well, as much as you can with a hardware error) and prints out the trace if it is enabled. This will catch errors (like booting the wrong image on a 533) which previously resulted in a infinite loop/hang, as well as random hardware errors before before setup_arch(). To disable this debug only feature - turn off EARLY_PRINTK. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22Blackfin: decouple unrelated cache settings to get exact behaviorJie Zhang
The current cache options don't really represent the hardware features. They end up setting different aspects of the hardware so that the end result is to turn on/off the cache. Unfortunately, when we hit cache problems with the hardware, it's difficult to test different settings to root cause the problem. The current settings also don't cleanly allow for different caching behaviors with different regions of memory. So split the configure options such that they properly reflect the settings that are applied to the hardware. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: merge sram init functionsGraf Yang
Now that the sram_init() function exists only to call the bfin_sram_init() after the punting of the reserve_pda() function, simply merge the two to avoid pointless overhead. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: drop unused reserve_pda() functionGraf Yang
The Per-processor Data Area isn't actually reserved by this function, and all it ended up doing was issuing a printk(), so punt it. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix link failure due to CONFIG_EXCEPTION_L1_SCRATCHGraf Yang
Move exception stack mess from entry.S to init.c to fix link failure when CONFIG_EXCEPTION_L1_SCRATCH is in use. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: mark init_pda as __init as only __init funcs all itMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Faster C implementation of no-MPU CPLB handlerBernd Schmidt
This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code. We ditch the old cplb-nompu implementation, which is a good example of why a good algorithm in a HLL is preferrable to a bad algorithm written in assembly. Rather than try to construct a table of all posible CPLBs and search it, we just create a (smaller) table of memory regions and their attributes. Some of the data structures are now unified for both the mpu and nompu cases. A lot of needless complexity in cplbinit.c is removed. Further optimizations: * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving these registers on the stack when entering a CPLB exception. * lose cli/nop/nop/sti sequences for some workarounds - these don't * make sense in an exception context Additional code unification should be possible after this. [Mike Frysinger <vapier.adi@gmail.com>: - convert CPP if statements to C if statements - remove redundant statements - use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten, we can punt it - add some BUG_ON() checks to make sure we dont overflow the small cplb_bounds array - add i/d cplb entries for the bootrom because there is functions/data in there we want to access - we do not need a NULL trailing entry as any time we access the bounds arrays, we use the nr_bounds variable ] Signed-off-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: SMP supporting patchset: Blackfin kernel and memory ↵Graf Yang
management code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin kernel and memory management code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits) Blackfin arch: If we double fault, rather than hang forever, reset Blackfin arch: When icache is off, make sure people know it Blackfin arch: Fix bug - skip single step in high priority interrupt handler instead of disabling all interrupts in single step debugging. Blackfin arch: cache the values of vco/sclk/cclk as the overhead of doing so (~24 bytes) is worth avoiding the software mult/div routines Blackfin arch: fix bug - IMDMA is not type struct dma_register Blackfin arch: check the EXTBANKS field of the DDRCTL1 register to see if we are using both memory banks Blackfin arch: Apply Bluetechnix CM-BF527 board support patch Blackfin arch: Add unwinding for stack info, and a little more detail on trace buffer Blackfin arch: Add ISP1760 board resources to BF548-EZKIT Blackfin arch: fix bug - detect 0.1 silicon revision BF527-EZKIT as 0.0 version Blackfin arch: add missing IORESOURCE_MEM flags to UART3 Blackfin arch: Add return value check in bfin_sir_probe(), remove SSYNC(). Blackfin arch: Extend sram malloc to handle L2 SRAM. Blackfin arch: Remove useless config option. Blackfin arch: change L1 malloc to base on slab cache and lists. Blackfin arch: use local labels and ENDPROC() markings Blackfin arch: Do not need this dualcore test module in kernel. Blackfin arch: Allow ptrace to peek and poke application data in L1 data SRAM. Blackfin arch: Add ANOMALY_05000368 workaround Blackfin arch: Functional power management support ...
2008-07-26blackfin: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-19Blackfin arch: change L1 malloc to base on slab cache and lists.Sonic Zhang
Remove the sram piece limitation and improve the performance to alloc/free sram piece data. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29[Blackfin] arch: kill section mismatch warningsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-09[Blackfin] arch: add "memmap=nn[KMG]@ss[KMG]" and "memmap=nn[KMG]$ss[KMG]" ↵Yi Li
options to blackfin, based on arch/i386/kernel/e820.c Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: fix bug kernel boot message: memory information is not ↵Yi Li
reasonable Some of the information in kernel boot message is not reasonable. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3846 - use _rambase as the start of kernel image. kernel is in the region [_rambase, _ramstart] - count in pages in per-cpu-page list as available memory - reserved memory now include: [0 - 4K] for bad pointer catching, memory reserved for abnormaly 05000263, memory reserved by kernel itself. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Initial checkin of the memory protection support.Bernd Schmidt
Enable it with CONFIG_MPU. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10Blackfin arch: show_mem can not be marked as init, since it is called during ↵Robin Getz
OOM condition show_mem can not be marked as init, since it is called during OOM condition from /mm/oom_kill.c:out_of_memory() and /mm/page_alloc.c:__alloc_pages() Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: combine the common code of free_initrd_mem and free_initmemMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12Blackfin arch: cleanup warnings from checkpatch -- no functional changesMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11Blackfin arch: mark our memory init functions with __init so they get freed ↵Mike Frysinger
after init Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-05-21Blackfin arch: ISP1761 doesn't work for USB flash diskAubrey Li
ZONE_DMA is required for some drivers subsystem, such as USB/SCSI. Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07blackfin architectureBryan Wu
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>