aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin
AgeCommit message (Collapse)Author
2008-04-23[Blackfin] arch: fix bug - when using trace buffer with CONFIG_MPU enabled.Bernd Schmidt
There were a couple of problems with the way the trace buffer state is saved/restored in assembly. The DEBUG_HWTRACE_SAVE/RESTORE macros save a value to the stack, which is not immediately obvious; the CPLB exception code needed changes to load the correct value of the stack pointer. The other problem is that the SAVE/RESTORE macros weren't pushing and popping the value downwards on the stack, but rather moving it _upwards_, which is of course completely broken. We also need to make sure there's a matching DEBUG_HWTRACE_RESTORE in the error case of the CPLB handler. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: fix up - CONFIG_BLKFIN_WT was renamed CONFIG_BFIN_WT while ↵Bernd Schmidt
the MPU code was out-of-tree. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: fix bug - grab locks when not atomicRobin Getz
grab locks when not atomic - this fixes the issues sometimes seen when using magic sysrq. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: fix bug - when we crash, current is not validRobin Getz
Sometimes when we crash, current is not valid, (has been written over), so the existing code causes a invalid read during exception context - which is a unrecoverable double fault. This fixes this. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: add i2c board info struct and move to new-style i2c interfaceBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: fix up gpio code style -- no functional changesMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: dump the stack before printing out an error otherwise the ↵Mike Frysinger
stack dump is useless as it shows us tracing through printk Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: conditionally enable flash resources since it requests the ↵Mike Frysinger
async memory bank Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: add code to initialize globals declared in linux/bootmem.h: ↵Yi Li
max_pfn, max_low_pfn, min_low_pfn. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: remove NOTES from linker scriptBernd Schmidt
Since r3658 | vapier | 2007-09-12 16:26:11 +0200 (Wed, 12 Sep 2007) | 1 line add more common defines for output sections we've had a new line, NOTES, in our linker script, which causes upstream binutils to complain about "missing phdr". Currently the only other arch that uses NOTES is i386, and the patch which added it also added PHDRS { text PT_LOAD FLAGS(5); /* R_E */ data PT_LOAD FLAGS(7); /* RWE */ note PT_NOTE FLAGS(0); /* ___ */ } and a few other modifications to use ":text" and ":data" to the linker script. It seems that we don't need NOTES at all, so just remove it. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-26[Blackfin] arch: add twi resources to CM_BF537 board as reported by Servaes ↵Mike Frysinger
Joordens Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-07[Blackfin] arch: declare CHECKFLAGS to make sparse output more readableMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-07[Blackfin] arch: add missing __user marking to ss_sp member of signalstack ↵Mike Frysinger
and a few userspace system functions Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29[Blackfin] arch: turn generic time on by defaultMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29[Blackfin] arch: add board bluetechnix kernel defconfigs to kernelMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29[Blackfin] arch: initial generic time and clock sourcesVitja Makarov
This patch enables Hight-Res Timers and tickless kernel Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-20[BLACKFIN] minor irq handler cleanupsJeff Garzik
- use standard irq_handler_t to define irq handler function arguments Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-17Generic semaphore implementationMatthew Wilcox
Semaphores are no longer performance-critical, so a generic C implementation is better for maintainability, debuggability and extensibility. Thanks to Peter Zijlstra for fixing the lockdep warning. Thanks to Harvey Harrison for pointing out that the unlikely() was unnecessary. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Ingo Molnar <mingo@elte.hu>
2008-03-03[Blackfin] arch: fix atomic and32/xor32 comments and ENDPROC markingsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-03[Blackfin] arch: fix bug - allow SDH driver to be used as moduleMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-06[Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscallsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29[Blackfin] arch: kill section mismatch warningsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-29[Blackfin] arch: handle the most common L1 shrinkage case (L1 does not exist ↵Mike Frysinger
for a part) so that any parts labeled for L1 instead get placed into external memory sections Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: make sure we have proper description/copyright/license linesMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Fix CONFIG_PM support for BF561Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Remove DPMC char driver optionMichael Hennerich
Remove redundant/obsolete/dead code from DPMC driver Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Cleanup abd Simplify:Michael Hennerich
- Simplify init_arch_irq - Make code more readable - Remove useless SSYNCs - Fix comments Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: fix bug - linux-2.6.24 (delayed) disable IRQ feature not ↵Michael Hennerich
functional for handle_simple_irq Bypass delayed disable feature by implementing chip->disable and chip->enable. http://lkml.org/lkml/2008/2/19/115 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: make sure we export the _bfin_swrst symbol as modules (like ↵Mike Frysinger
the watchdog) need it Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: punt the simple ad5304 spi driver now that the generic ↵Mike Frysinger
spidev driver lets you do it from userspace Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: fix bug - Move IWR Enable All to the end of init_arch_irq ↵Michael Hennerich
otherwise it fails Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: grab mac address from OTP on BF527-EZKITMike Frysinger
The bf527-ezkit stores the mac address in OTP, so grab it from there rather than flash Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Fix bug - Setting peripheral_map only when dma channel is ↵Sonic Zhang
UART2/3. Singed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-22[Blackfin] arch: add board resources for new simple-gpio char driverMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: fix bug - set right partition size in the board filesMike Frysinger
- set default u-boot partition size to 256k - modify the offset with the size change - use mtd defines (append for offset and full for size) where applicable rather than churning constants when we dont have to Signed-off-by: Grace Pan <grace.pan@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-22[Blackfin] arch: Update default configSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-22[Blackfin] arch: add fixed code to the memory map outputMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-22[Blackfin] arch: add handling for the mach symlink in the `make V=1` caseMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-22[Blackfin] arch: respect `make -s` when creating the asm/mach symlinkMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-22[Blackfin] arch: fix bug add missing header fileMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-14d_path: Make d_path() use a struct pathJan Blunck
d_path() is used on a <dentry,vfsmount> pair. Lets use a struct path to reflect this. [akpm@linux-foundation.org: fix build in mm/memory.c] Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-13xtime_lock vs update_process_timesPeter Zijlstra
Commit d3d74453c34f8fd87674a8cf5b8a327c68f22e99 ("hrtimer: fixup the HRTIMER_CB_IRQSAFE_NO_SOFTIRQ fallback") broke several archs, and since only Russell bothered to merge the fix, and Greg to ACK his arch, I'm sending this for merger. I have confirmation that the Alpha bit results in a booting kernel. That leaves: blackfin, frv, sh and sparc untested. The deadlock in question was found by Russell: IRQ handle -> timer_tick() - xtime seqlock held for write -> update_process_times() -> run_local_timers() -> hrtimer_run_queues() -> hrtimer_get_softirq_time() - tries to get a read lock Now, Thomas assures me the fix is trivial, only do_timer() needs to be done under the xtime_lock, and update_process_times() can savely be removed from under it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Greg Ungerer <gerg@uclinux.org> CC: Richard Henderson <rth@twiddle.net> CC: Bryan Wu <bryan.wu@analog.com> CC: David Howells <dhowells@redhat.com> CC: Paul Mundt <lethal@linux-sh.org> CC: William Irwin <wli@holomorphy.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09ide: introduce HAVE_IDESam Ravnborg
To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-09[Blackfin] arch: fix build fails only include header files when enabledMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-07[Blackfin] arch: declare default INSTALL_PATH for Blackfin portsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: Encourage users to use the spidev character driver: Provide ↵Michael Hennerich
platform support - Enable kernel generic spidev driver for blackfin SPI ADC - spi_adc driver, document and test sample not synced Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: Enable UART2 and UART3 for bf548Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: Enable NET2272 on BF561-EZkit - remove request_mem_regionMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch:Fix BUG [#3876] pfbutton test for BTN3 on bf533 don't show ↵Michael Hennerich
complete info - Buttons on the BF533-STAMP board are not inverted - Fix spurious GPIO Interrupt caused during set irq_type for edge triggered interrupts Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: fix building with mtd uclinux by putting the mtd_phys ↵Mike Frysinger
option into the function it actually gets used in Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 02:50:22 +0000