| Age | Commit message (Collapse) | Author |
|---|
|
|
|
avoid collision.
|
|
collision.
|
|
Also, remove useless CVS id tag.
|
|
- Workaround for cachebug (Guinness TR 106).
- Add ARTPEC-3 support.
|
|
- Change AFLAGS to asflags-y, LDFLAGS to ldflags-y and EXTRA_CFLAGS
to ccflags-y. We only need the flags in this Makefile.
|
|
- Change AFLAGS to asflags-y, LDFLAGS to ldflags-y and KBUILD_CFLAGS
to ccflags-y. We only need the flags in this Makefile.
|
|
|
|
|
|
needed.
Also, remove useless CVS id tag.
|
|
not needed.
Also, remove useless CVS id tag.
|
|
|
|
Fixed a bug where two interfaces using pins in the same pin group could
not be allocated at the same time even if there where no pin collisions.
Change all restore and returns into goto exit pattern.
Also, remove useless CVS id and correct chapter reference for ETRAX100LX
Designer's Reference in comment.
|
|
If serial port 2 is used, select it in R_GEN_CONFIG.
If serial port 2 is used, setup the control registers for the port.
This is done to avoid a pulse on the TXD line during start up,
which could disturb some units.
Also, remove useless CVS id and log.
|
|
|
|
shared memory descriptors
Also, cleanup formatting and fix whitespace errors.
|
|
Don't return when we're inside local_irq_disable(), use goto exit instead.
Also, cleanup some whitespace errors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Remove useless CVS id tag.
- Remove no longer needed extern declarations for kgdb.
|
|
- Change C99 comment style to C89.
- Remove superfluous SANITYCHECK macro, test FAST_TIMER_SANITY_CHECKS instead.
|
|
|
|
|
|
|
|
|
|
- Move local_irq_save to after possible return in console_write_direct.
- Remove old raw_printk hack, not needed anymore.
- Add watchdog handling.
- Make serial_driver use depend on CONFIG_ETRAX_SERIAL.
- Remove useless CVS log.
|
|
- Use mutex instead of spinlock, fixes kernel bugzilla report 8339.
- Make sure that pcf8563_init can be called multiple times but only setup once.
- Change RTC_VLOW_RD -> RTC_VL_READ, RTC_VLOW_SET -> RTC_VL_CLR
- Cache the voltage low value at driver init so the battery status
information does not get 'accidentally' cleared when setting the RTC time.
- Add weekday handling.
- Correct leapyear handling to include 100 and 400 year exceptions.
- Correct whitespace and formatting errors.
- Remove useless CVS id tag.
|
|
- Set the variable first to zero after first setup, so we can
stop multiple calls to i2c_init from trying to setup i2c.
- The last byte read by the master in an i2c transfer needs to
be NACKed, not ACKed.
- Also, remove useless CVS log and CVS id tags.
|
|
- Remove useless CVS log and CVS id tags.
- Whitespace fix and remove C++ comment.
|
|
- Correct include path for sv_addr_ag.h, should be asm/arch/
- Fix some whitespace errors.
- Remove useless CVS id tag.
|
|
- Correct include path for sv_addr_ag.h, should be included from asm/arch/
- Remove useless CVS id tag.
- Correct whitespace errors and some formatting.
|
|
Replace EXTRA_CFLAGS with ccflags-y.
Change ASFLAGS and LDFLAGS into asflags-y and ldflags-y, we only need
these flags in this makefile.
|
|
Replace use of EXTRA_CFLAGS with ccflags-y and LDFLAGS with ldflags-y,
(we only need to change linker flags for this makefile)
|
|
- Shorten include paths to machine dependent header files.
- Register name for first timer is now regi_timer0.
- Remove raw_printk hack, use oops_in_progress instead.
- Add handling of CPU frequency scaling for CRIS.
- Remove regs parameter to timer_interrupt, get them from get_irq_regs instead.
- Whitespace and formatting changes.
|
|
|
|
- Remove watchdog handling, handled elsewhere.
- Shorten include paths to machine dependent header files.
- Remove raw_printk hack, we now use oops_in_progress instead.
- Add handling of BUG for exception handlers (break 14).
- Formatting and whitespace changes.
|
|
- Shorten include paths for machine dependent header files.
- Remove unused extern declaration of etrax_gpio_wake_up_check.
- Register name for first timer is now regi_timer0.
|
|
- First timer register has changed name to timer0.
- Build IRQs with only IRQ number, mask bit will be calculated instead.
- Add more IRQs, up to 64 supported.
- Use arrays to hold which IRQs triggered instead of trying to do magic
with two 32 bit values now that more than 32 IRQs are supported.
|
|
- Shorten include paths for machine specific header files.
- Add magic for booting NAND flash.
- Change CONFIG_ETRAXFS_SIM to CONFIG_ETRAX_VCS_SIM.
- Use assembler macros for initializing hardware (clocks)
- Add stubs for SMP slave CPUs.
- Search for cramfs or jffs2 if no romfs found.
- Initialize l2cache.
|
|
- Change include path to machine dependent header files.
- Remove __INLINE__, it expands to inline anyway.
- Don't initialize static variables.
- Change timers to use fasttimer_t instead of timevals.
- Change name of timeval_cmp to fasttime_cmp to highlight this.
- Register name for first timer is regi_timer0, not regi_timer.
- Whitespace and formatting changes.
- Don't return if we're blocking interrupts, goto done and restore interrupts.
- Disable interrupts while walking the fasttimer list, only restore
while doing the callback.
- Remove #ifdef DECLARE_WAITQUEUE, this code won't be used in another OS.
- Remove CVS log.
|
|
- Shorten include paths to machine dependent headers.
- Add support for fifth serial port.
- Remove CONFIG_ETRAXFS_SIM and CONFIG_ETRAX_DEBUG_PORT_NULL, no longer used.
- Remove raw_printk and stupid_debug hack, no longer needed.
- Remove dummy console stuff, no longer needed.
- Correct some register type names.
- Correct some whitespace errors and formatting.
|
|
- Add ifdef for ETRAX_AXISFLASHMAP to avoid compiling file unless it is set.
- Use assembler macros for setting up clocks.
- Don't copy image, just jump to it (only works for NOR flash)
|
|
- Shorten include paths to machine specific headers.
- Remove fill_inbuf, not defined here.
- Return __dest as value from memcpy.
- Enable serial port hardware transmitter and receiver in serial_setup.
- Correct baudrate divisor calculation, changed from 4800 to 115200.
- Add support for Artpec-3 specific serial port setup.
- Initialize pinmux for the correct serial port.
|
|
- Fixes for NAND and NOR flash booting.
- Use assembler macros for common tasks (clocks, general io etc)
- Use (EtraxFS or Artpec-3) machine specific include for dram and hardware init.
|
