aboutsummaryrefslogtreecommitdiff
path: root/arch/i386
AgeCommit message (Collapse)Author
2006-02-03[PATCH] OProfile: fixed x86_64 incorrect kernel call graphsTong Li
Fix the problem in kernel 2.6.15.1 (and early versions) that OProfile on x86_64 does not correctly collect the stack traces for kernel functions. The original code in valid_kernel_stack() in arch/i386/oprofile/backtrace.c assumes that the frame pointer (headaddr) should be greater than stack (i.e., regs). This assumption is wrong for x86_64 because NMIs in x86_64 use a seperate stack different from the kernel stack. Therefore, the variable stack now points to some location on the NMI stack, which turns out to be at a higher address than the frame pointer (headaddr) on the kernel stack. The correct comparison here should be between headaddr and regs->rsp for x86_64. Signed-off-by: Tong Li <tong.n.li@intel.com> Cc: John Levon <levon@movementarian.org> Cc: Philippe Elie <phil.el@wanadoo.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
2006-02-01[PATCH] VMSPLIT config optionsMark Lord
Enable selection of different user/kernel VM splits for i386, including an optimized mode for 1GB physical RAM, which gives the kernel a direct (non HIGHMEM) mapping to the entire 1GB rather than just the first 896MB. There is a similarly a similarly optimized mode for machines with exactly 2GB of physical RAM. This can speed up the kernel by avoiding having to create/destroy temporary HIGHMEM mappings, and by not having to include HIGHMEM support at all on such machines. The flip side is that there's less virtual addressing left for userspace in these alternatives, and some binary-only kernel modules may misbehave unless rebuilt with the same VMSPLIT option as the main kernel image. Original idea/patch from Jens Axboe, modified based on suggestions from Linus et al. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] disable lost tick compensation before TSCs are syncedjohn stultz
Avoid lost tick compensation early in boot before the TSCs are synchronized. Currently timekeeping is enabled before the TSCs are synchronized, thus when the TSCs are synched (reset to zero), it appears that a number of lost ticks have occurred. This can cause premature expiry of timers and in extreme cases can cause the soft lockup detection to fire. This resolves issues reported by Andy Whitcroft as well as bug #5366 reported by Tim Mann. Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01[PATCH] CONFIG_DOUBLEFAULT Kconfig fixIngo Molnar
Move CONFIG_DOUBLEFAULT from the main Kconfig menu (!) into its proper place: the "Processor Type and features" submenu. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[PATCH] PCI: handle bogus MCFG entriesAndi Kleen
Handle more bogus MCFG entries Some Asus P4 boards seem to have broken MCFG tables with only a single entry for busses 0-0. Special case these and assume they mean all busses can be accessed. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: irq and pci_ids: patch for Intel ICH8Jason Gaston
This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/x86Linus Torvalds
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
2006-01-26[X86] Add new Intel cache descriptors.Dave Jones
From http://www.intel.com/design/xeon/applnots/24161830.pdf 16MB of 16-way assoc 64 byte per cacheline L3 cache anyone? Yum. Signed-off-by: Dave Jones <davej@redhat.com>
2006-01-26[CPUFREQ] p4-clockmod: Workaround for CPU's with N60 errataBen Collins
Ignore clock frequencies below 2Ghz for CPU's detected with N60 errata bug. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dave Jones <davej@redhat.com>
2006-01-24[ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi ↵Len Brown
branches into release Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-19[CPUFREQ] X86_GX_SUSPMOD must depend on PCIAdrian Bunk
This patch fixes the following compile error: ... CC arch/i386/kernel/cpu/cpufreq/gx-suspmod.o arch/i386/kernel/cpu/cpufreq/gx-suspmod.c: In function 'gx_detect_chipset': arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: error: implicit declaration of function 'pci_match_id' arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: warning: comparison between pointer and integer make[3]: *** [arch/i386/kernel/cpu/cpufreq/gx-suspmod.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave Jones <davej@redhat.com>
2006-01-18[PATCH] EDAC: core EDAC support codeAlan Cox
This is a subset of the bluesmoke project core code, stripped of the NMI work which isn't ready to merge and some of the "interesting" proc functionality that needs reworking or just has no place in kernel. It requires no core kernel changes except the added scrub functions already posted. The goal is to merge further functionality only after the core code is accepted and proven in the base kernel, and only at the point the upstream extras are really ready to merge. From: doug thompson <norsk5@xmission.com> This converts EDAC to sysfs and is the final chunk neccessary before EDAC has a stable user space API and can be considered for submission into the base kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: doug thompson <norsk5@xmission.com> Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18[PATCH] Add pselect/ppoll system calls on i386David Woodhouse
Add the sys_pselect6() and sys_poll() calls to the i386 syscall table. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18[PATCH] Handle TIF_RESTORE_SIGMASK for i386David Howells
Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled: [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc [PATCH] 3/3 Generic sys_rt_sigsuspend It does the following: (1) Declares TIF_RESTORE_SIGMASK for i386. (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set. (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved in current->saved_sigmask. (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead. (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK rather than attempting to fudge the return registers. (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping intrinsically. (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or -EFAULT rather than true/false to be consistent with the rest of the kernel. Due to the fact do_signal() is then only called from one place: (8) Makes do_signal() no longer have a return value is it was just being ignored; force_sig() takes care of this. (9) Discards the old sigmask argument to do_signal() as it's no longer necessary. (10) Makes do_signal() static. (11) Marks the second argument to do_notify_resume() as unused. The unused argument should remain in the middle as the arguments are passed in as registers, and the ordering is specific in entry.S Given the way do_signal() is now no longer called from sys_{,rt_}sigsuspend(), they no longer need access to the exception frame, and so can just take arguments normally. This patch depends on sys_rt_sigsuspend patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18[PATCH] vfs: *at functions: i386Ulrich Drepper
Wire up the x86 syscalls Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18[PATCH] e1000: Added disable packet split capabilityJesse Brandeburg
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-16[PATCH] x86_64: add __meminit for memory hotplugMatt Tolentino
Add __meminit to the __init lineup to ensure functions default to __init when memory hotplug is not enabled. Replace __devinit with __meminit on functions that were changed when the memory hotplug code was introduced. Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16[PATCH] i386: remove gcc version check for CONFIG_REGPARMAdrian Bunk
Since we do no longer support any gcc < 3.0, there's no need to check for it.. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16[PATCH] x86_64: Mark powernow k8 init functions as __cpuinitAndi Kleen
cpufreq init can be called when a CPU is set online. Need to make powernow-k8's initialisation functions __cpuinit to prevents oopses when a CPU is off/onlined on a AMD system Cc: trenn@suse.de Cc: mark.langsdorf@amd.com Cc: davej@redhat.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
2006-01-14[PATCH] enable unit-at-a-time optimisations for gcc4Ingo Molnar
Allow gcc4 compilers to optimize unit-at-a-time. This flag enables gcc to "see" the entire C file before making optimisation decisions such as inline, which results in gcc making better decisions. One of the immediate effects of this is that static functions that are used only once now get inlined. gcc 3.4 has this flag as well, however gcc 3.x have a problem with inlining and stacks and as a result, enabling this flag there would cause excessive and unacceptable stack use. This problem is fixed in the gcc 4.x series. The x86-64 architecture already enables this feature so it's well tested already. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] gx1fb: (try to) play nicer with various BIOSesDavid Vrabel
Seems that the CS5530A chip used in Geode GX1 systems has some crazy feature that causes SMI traps when accessing the PCI configuration space of the video device. Various GX1 BIOSes seem to use this 'feature' to hide the real BARs of the device. This patch disables these traps (in an early PCI fixup) so that Linux sees the real, physical BARs and not the virtual ones provided by the BIOS. This should allow the GX1 framebuffer driver to work on more systems that have different BIOSes as the driver no longer guesses at what the virtual BARs mean. I'm not entirely sure it the correct solution as I can neither test regular VGA console nor the X's 'cyrix' video driver so there might be some breakage there -- probably best to get some more testers before applying it. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] i386: fix stack dump loglevelChuck Ebbert
Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] i386: put HOTPLUG_CPU under Processor type, not Bus optionsRandy Dunlap
Move the HOTPLUG_CPU option under "Processor type" instead of under "Bus options". This makes it the same for i386 as most other processor types (arm, ia64, parisc, ppc, s390, & x86_64; but not for powerpc). Besides, it takes me too long to find it under Bus options. I can't be the only person who has trouble finding it. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15correct email address of Manfred SpraulChristian Kujau
I tried to send the forcedeth maintainer an email, but it came back with: "The mail address manfreds@colorfullife.com is not read anymore. Please resent your mail to manfred@ instead of manfreds@." This patch fixes this. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-12[PATCH] i386: task_stack_page()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] i386: fix task_pt_regs()akpm@osdl.org
) From: Al Viro <viro@ftp.linux.org.uk> task_pt_regs() needs the same offset-by-8 to match copy_thread() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] i386: task_thread_info()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] scheduler cache-hot-autodetectakpm@osdl.org
) From: Ingo Molnar <mingo@elte.hu> This is the latest version of the scheduler cache-hot-auto-tune patch. The first problem was that detection time scaled with O(N^2), which is unacceptable on larger SMP and NUMA systems. To solve this: - I've added a 'domain distance' function, which is used to cache measurement results. Each distance is only measured once. This means that e.g. on NUMA distances of 0, 1 and 2 might be measured, on HT distances 0 and 1, and on SMP distance 0 is measured. The code walks the domain tree to determine the distance, so it automatically follows whatever hierarchy an architecture sets up. This cuts down on the boot time significantly and removes the O(N^2) limit. The only assumption is that migration costs can be expressed as a function of domain distance - this covers the overwhelming majority of existing systems, and is a good guess even for more assymetric systems. [ People hacking systems that have assymetries that break this assumption (e.g. different CPU speeds) should experiment a bit with the cpu_distance() function. Adding a ->migration_distance factor to the domain structure would be one possible solution - but lets first see the problem systems, if they exist at all. Lets not overdesign. ] Another problem was that only a single cache-size was used for measuring the cost of migration, and most architectures didnt set that variable up. Furthermore, a single cache-size does not fit NUMA hierarchies with L3 caches and does not fit HT setups, where different CPUs will often have different 'effective cache sizes'. To solve this problem: - Instead of relying on a single cache-size provided by the platform and sticking to it, the code now auto-detects the 'effective migration cost' between two measured CPUs, via iterating through a wide range of cachesizes. The code searches for the maximum migration cost, which occurs when the working set of the test-workload falls just below the 'effective cache size'. I.e. real-life optimized search is done for the maximum migration cost, between two real CPUs. This, amongst other things, has the positive effect hat if e.g. two CPUs share a L2/L3 cache, a different (and accurate) migration cost will be found than between two CPUs on the same system that dont share any caches. (The reliable measurement of migration costs is tricky - see the source for details.) Furthermore i've added various boot-time options to override/tune migration behavior. Firstly, there's a blanket override for autodetection: migration_cost=1000,2000,3000 will override the depth 0/1/2 values with 1msec/2msec/3msec values. Secondly, there's a global factor that can be used to increase (or decrease) the autodetected values: migration_factor=120 will increase the autodetected values by 20%. This option is useful to tune things in a workload-dependent way - e.g. if a workload is cache-insensitive then CPU utilization can be maximized by specifying migration_factor=0. I've tested the autodetection code quite extensively on x86, on 3 P3/Xeon/2MB, and the autodetected values look pretty good: Dual Celeron (128K L2 cache): --------------------- migration cost matrix (max_cache_size: 131072, cpu: 467 MHz): --------------------- [00] [01] [00]: - 1.7(1) [01]: 1.7(1) - --------------------- cacheflush times [2]: 0.0 (0) 1.7 (1784008) --------------------- Here the slow memory subsystem dominates system performance, and even though caches are small, the migration cost is 1.7 msecs. Dual HT P4 (512K L2 cache): --------------------- migration cost matrix (max_cache_size: 524288, cpu: 2379 MHz): --------------------- [00] [01] [02] [03] [00]: - 0.4(1) 0.0(0) 0.4(1) [01]: 0.4(1) - 0.4(1) 0.0(0) [02]: 0.0(0) 0.4(1) - 0.4(1) [03]: 0.4(1) 0.0(0) 0.4(1) - --------------------- cacheflush times [2]: 0.0 (33900) 0.4 (448514) --------------------- Here it can be seen that there is no migration cost between two HT siblings (CPU#0/2 and CPU#1/3 are separate physical CPUs). A fast memory system makes inter-physical-CPU migration pretty cheap: 0.4 msecs. 8-way P3/Xeon [2MB L2 cache]: --------------------- migration cost matrix (max_cache_size: 2097152, cpu: 700 MHz): --------------------- [00] [01] [02] [03] [04] [05] [06] [07] [00]: - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [01]: 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [02]: 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) [03]: 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) [04]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) [05]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) [06]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) [07]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - --------------------- cacheflush times [2]: 0.0 (0) 19.2 (19281756) --------------------- This one has huge caches and a relatively slow memory subsystem - so the migration cost is 19 msecs. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: <wilder@us.ibm.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386/x86-64: make setup_early_printk() usage consistentJan Beulich
The explicit and implicit calls to setup_early_printk() were passing inconsistent arguments. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386: Move DOUBLEFAULT config to arch/i386/KconfigAndi Kleen
It has no business being elsewhere and x86-64 doesn't need/want it. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386: Move phys_proc_id/early intel workaround to correct function.Andi Kleen
early_cpu_detect only runs on the BP, but this code needs to run on all CPUs. Looks like a mismerge somewhere. Also add a warning comment. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Memorize location of i8259 for reboots.Eric W. Biederman
Currently we attempt to restore virtual wire mode on reboot, which only works if we can figure out where the i8259 is connected. This is very useful when we are kexec another kernel and likely helpful to an peculiar BIOS that make assumptions about how the system is setup. Since the acpi MADT table does not provide the location where the i8259 is connected we have to look at the hardware to figure it out. Most systems have the i8259 connected the local apic of the cpu so won't be affected but people running Opteron and some serverworks chipsets should be able to use kexec now. In addition this patch removes the hard coded assumption that the io_apic that delivers isa interrups is always known to the kernel as io_apic 0. There does not appear to be anything to guarantee that assumption is true. And From: Vivek Goyal <vgoyal@in.ibm.com> A minor fix to the patch which remembers the location of where i8259 is connected. Now counter i has been replaced by apic. counter i is having some junk value which was leading to non-detection of i8259 connected to IOAPIC. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386: Replace broken serialize_cpu in microcode driver with correct ↵Andi Kleen
sync_core Passing random input values in eax to cpuid is not a good idea because the CPU will GPF for unknown ones. Use the correct x86-64 version that exists for a longer time too. This also adds a memory barrier to prevent the optimizer from reordering. Cc: tigran@veritas.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386: Handle missing local APIC timer interrupts on C3 stateVenkatesh Pallipadi
Whenever we see that a CPU is capable of C3 (during ACPI cstate init), we disable local APIC timer and switch to using a broadcast from external timer interrupt (IRQ 0). This is needed because Intel CPUs stop the local APIC timer in C3. This is currently only enabled for Intel CPUs. Patch below adds the code for i386 and also the ACPI hunk. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386/x86-64: Remove sub jiffy profile timer supportVenkatesh Pallipadi
Remove the finer control of local APIC timer. We cannot provide a sub-jiffy control like this when we use broadcast from external timer in place of local APIC. Instead of removing this only on systems that may end up using broadcast from external timer (due to C3), I am going the "I'm feeling lucky" way to remove this fully. Basically, I am not sure about usefulness of this code today. Few other architectures also don't seem to support this today. If you are using profiling and fine grained control and don't like this going away in normal case, yell at me right now. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Fix off by one in acpi table mappingAndi Kleen
And fix the test to include the size Noticed by Vivek Goyal Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Generalize DMI and enable for x86-64Andi Kleen
Some people need it now on 64bit so reuse the i386 code for x86-64. This will be also useful for future bug workarounds. It is a bit simplified there because there is no need to do it very early on x86-64. This means it doesn't need early ioremap et.al. We run it as a core initcall right now. I hope it's not needed for early setup. I added a general CONFIG_DMI symbol in case IA64 or someone else wants to reuse the code later too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386/x86-64: Don't IPI to offline cpus on shutdownEric W. Biederman
So why are we calling smp_send_stop from machine_halt? We don't. Looking more closely at the bug report the problem here is that halt -p is called which triggers not a halt but an attempt to power off. machine_power_off calls machine_shutdown which calls smp_send_stop. If pm_power_off is set we should never make it out machine_power_off to the call of do_exit. So pm_power_off must not be set in this case. When pm_power_off is not set we expect machine_power_off to devolve into machine_halt. So how do we fix this? Playing too much with smp_send_stop is dangerous because it must also be safe to be called from panic. It looks like the obviously correct fix is to only call machine_shutdown when pm_power_off is defined. Doing that will make Andi's assumption about not scheduling true and generally simplify what must be supported. This turns machine_power_off into a noop like machine_halt when pm_power_off is not defined. If the expected behavior is that sys_reboot(LINUX_REBOOT_CMD_POWER_OFF) becomes sys_reboot(LINUX_REBOOT_CMD_HALT) if pm_power_off is NULL this is not quite a comprehensive fix as we pass a different parameter to the reboot notifier and we set system_state to a different value before calling device_shutdown(). Unfortunately any fix more comprehensive I can think of is not obviously correct. The core problem is that there is no architecture independent way to detect if machine_power will become a noop, without calling it. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386/x86-64: Update AMD CPUID flagsAndi Kleen
Print bits for RDTSCP, SVM, CR8-LEGACY. Also now print power flags on i386 like x86-64 always did. This will add a new line in the 386 cpuinfo, but that shouldn't be an issue - did that in the past too and I haven't heard of any breakage. I shrunk some of the fields in the i386 cpuinfo_x86 to chars to make up for the new int "x86_power" field. Overall it's smaller than before. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] x86_64: Use X86_FEATURE_CONSTANT_TSC now to clean up Intel speedstep ↵Andi Kleen
drivers They previously tried to figure this out on their own. Suggested by Venkatesh. Cc: venkatesh.pallipadi@intel.com Cc: davej@redhat.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] i386/x86-64: Generalize X86_FEATURE_CONSTANT_TSC flagAndi Kleen
Define it for i386 too. This is a synthetic flag that signifies that the CPU's TSC runs at a constant P state invariant frequency. Fix up the logic on x86-64/i386 to set it on all known CPUs. Use the AMD defined bit to set it on future AMD CPUs. Cc: venkatesh.pallipadi@intel.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] capable/capability.h (arch/)Randy Dunlap
arch: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] kprobes: fix race in recovery of reentrant probeKeshavamurthy Anil S
There is a window where a probe gets removed right after the probe is hit on some different cpu. In this case probe handlers can't find a matching probe instance related to break address. In this case we need to read the original instruction at break address to see if that is not a break/int3 instruction and recover safely. Previous code had a bug where we were not checking for the above race in case of reentrant probes and the below patch fixes this race. Tested on IA64, Powerpc, x86_64. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] fix/simplify mutex debugging codeDavid Woodhouse
Let's switch mutex_debug_check_no_locks_freed() to take (addr, len) as arguments instead, since all its callers were just calculating the 'to' address for themselves anyway... (and sometimes doing so badly). Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10x86: fix "make install" targetLinus Torvalds
Removing the dependency on the boot image build was good, but it also meant that the $< expansion by make needed to be done explicitly. Noted by Stephen Hemminger. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
Fix up some trivial conflicts in {i386|ia64}/Makefile
2006-01-10[PATCH] vesafb: Drop blank hookAntonino A. Daplas
From: Bugzilla Bug 5351 "After resuming from S3 (suspended while in X), the LCD panel stays black . However, the laptop is up again, and I can SSH into it from another machine. I can get the panel working again, when I first direct video output to the CRT output of the laptop, and then back to LCD (done by repeatedly hitting Fn+F5 buttons on the Toshiba, which directs output to either LCD, CRT or TV) None of this ever happened with older kernels." This bug is due to the recently added vesafb_blank() method in vesafb. It works with CRT displays, but has a high incidence of problems in laptop users. Since CRT users don't really get that much benefit from hardware blanking, drop support for this. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>