aboutsummaryrefslogtreecommitdiff
path: root/arch/i386
AgeCommit message (Collapse)Author
2006-09-29[PATCH] pidspace: is_init()Sukadev Bhattiprolu
This is an updated version of Eric Biederman's is_init() patch. (http://lkml.org/lkml/2006/2/6/280). It applies cleanly to 2.6.18-rc3 and replaces a few more instances of ->pid == 1 with is_init(). Further, is_init() checks pid and thus removes dependency on Eric's other patches for now. Eric's original description: There are a lot of places in the kernel where we test for init because we give it special properties. Most significantly init must not die. This results in code all over the kernel test ->pid == 1. Introduce is_init to capture this case. With multiple pid spaces for all of the cases affected we are looking for only the first process on the system, not some other process that has pid == 1. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: <lxc-devel@lists.sourceforge.net> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] kthread: convert arch/i386/kernel/apm.cSerge E. Hallyn
Convert i386 apm.c from kernel_thread(), whose export is deprecated, to kthread API. Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] oprofile: ppro: need to enable/disable all the countersArun Sharma
Need to enable/disable all the counters instead of just counter 0. This affects all cpus with family=6, including i386/core. Usual symptom: only counter 0 provides samples. Other counters don't produce samples. Signed-off-by: Arun Sharma <arun.sharma@google.com> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] efi: add lock annotations for efi_call_phys_prelog and ↵Josh Triplett
efi_call_phys_epilog The functions efi_call_phys_prelog and efi_call_phys_epilog in arch/i386/kernel/efi.c wrap the spinlock efi_rt_lock: efi_call_phys_prelog returns with the lock held, and efi_call_phys_epilog releases the lock without acquiring it. Add lock annotations to these two functions so that sparse can check callers for lock pairing, and so that sparse will not complain about these functions since they intentionally use locks in this manner. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] make PROT_WRITE imply PROT_READJason Baron
Make PROT_WRITE imply PROT_READ for a number of architectures which don't support write only in hardware. While looking at this, I noticed that some architectures which do not support write only mappings already take the exact same approach. For example, in arch/alpha/mm/fault.c: " if (cause < 0) { if (!(vma->vm_flags & VM_EXEC)) goto bad_area; } else if (!cause) { /* Allow reads even for write-only mappings */ if (!(vma->vm_flags & (VM_READ | VM_WRITE))) goto bad_area; } else { if (!(vma->vm_flags & VM_WRITE)) goto bad_area; } " Thus, this patch brings other architectures which do not support write only mappings in-line and consistent with the rest. I've verified the patch on ia64, x86_64 and x86. Additional discussion: Several architectures, including x86, can not support write-only mappings. The pte for x86 reserves a single bit for protection and its two states are read only or read/write. Thus, write only is not supported in h/w. Currently, if i 'mmap' a page write-only, the first read attempt on that page creates a page fault and will SEGV. That check is enforced in arch/blah/mm/fault.c. However, if i first write that page it will fault in and the pte will be set to read/write. Thus, any subsequent reads to the page will succeed. It is this inconsistency in behavior that this patch is attempting to address. Furthermore, if the page is swapped out, and then brought back the first read will also cause a SEGV. Thus, any arbitrary read on a page can potentially result in a SEGV. According to the SuSv3 spec, "if the application requests only PROT_WRITE, the implementation may also allow read access." Also as mentioned, some archtectures, such as alpha, shown above already take the approach that i am suggesting. The counter-argument to this raised by Arjan, is that the kernel is enforcing the write only mapping the best it can given the h/w limitations. This is true, however Alan Cox, and myself would argue that the inconsitency in behavior, that is applications can sometimes work/sometimes fails is highly undesireable. If you read through the thread, i think people, came to an agreement on the last patch i posted, as nobody has objected to it... Signed-off-by: Jason Baron <jbaron@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Andi Kleen <ak@muc.de> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] convert i386 Summit subarch to use SRAT info for apicid_to_node callskeith mannthey
Convert the i386 summit subarch apicid_to_node to use node information provided by the SRAT. It was discussed a little on LKML a few weeks ago and was seen as an acceptable fix. The current way of obtaining the nodeid static inline int apicid_to_node(int logical_apicid) { return logical_apicid >> 5; } is just not correct for all summit systems/bios. Assuming the apicid matches the Linux node number require a leap of faith that the bios mapped out the apicids a set way. Modern summit HW (IBM x460) does not layout its bios in the manner for various reasons and is unable to boot i386 numa. The best way to get the correct apicid to node information is from the SRAT table during boot. It lays out what apicid belongs to what node. I use this information to create a table for use at run time. Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] x86: use probe_kernel_address in handle_BUG()Andrew Morton
Avoid possible deadlock on a BUG() inside down_write(mmap_sem). The deadlock can only occur if something has gone horridly wrong, because a fault here shouldn't happen. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] x86 microcode: don't check the sizeShaohua Li
IA32 manual says if micorcode update's size is 0, then the size is default size (2048 bytes). But this doesn't suggest all microcode update's size should be above 2048 bytes to me. We actually had a microcode update whose size is 1024 bytes. The patch just removed the check. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Tigran Aivazian <tigran@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] x86 microcode: add sysfs and hotplug supportShaohua Li
Add sysfs support. Currently each CPU has three microcode related attributes. One is 'version' which shows current ucode version of CPU. Tools can use the attribute do validation or show CPU ucode status. one is 'reload' which allows manually reloading ucode. Another is 'processor_flags', which exports processor flags, so we can write tools to check if CPU has latest ucode. Also add suspend/resume and CPU hotplug support. [akpm@osdl.org: cleanups, build fix] [bunk@stusta.de: Kconfig fixes] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tigran Aivazian <tigran@veritas.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] x86 microcode: using request_firmware to pull microcodeShaohua Li
Using request_firmware to pull ucode from userspace, so we don't need the application 'microcode_ctl' to assist. We name each ucode file according to CPU's info as intel-ucode/family-model-stepping. In this way we could split ucode file as small one. This has a lot of advantages such as selectively update and validate microcode for specific models, better manage microcode file, easily write tools for administerators and so on. with the changes, we should put all intel-ucode/xx-xx-xx microcode files into the firmware dir (I had a tool to split previous big data file into small one and later we will release new style data file). The init script should be changed to just loading the driver without unloading Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tigran Aivazian <tigran@veritas.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] x86 microcode: microcode driver cleanup.Shaohua Li
Clean up microcode update driver and make it more readable. [akpm@osdl.org: cleanups] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tigran Aivazian <tigran@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] Have x86 use add_active_range() and free_area_init_nodesMel Gorman
Size zones and holes in an architecture independent manner for x86. [akpm@osdl.org: build fix] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Keith Mannthey" <kmannth@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (225 commits) [PATCH] Don't set calgary iommu as default y [PATCH] i386/x86-64: New Intel feature flags [PATCH] x86: Add a cumulative thermal throttle event counter. [PATCH] i386: Make the jiffies compares use the 64bit safe macros. [PATCH] x86: Refactor thermal throttle processing [PATCH] Add 64bit jiffies compares (for use with get_jiffies_64) [PATCH] Fix unwinder warning in traps.c [PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1 [PATCH] x86: Move direct PCI scanning functions out of line [PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCI [PATCH] Don't leak NT bit into next task [PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder [PATCH] Fix some broken white space in ia32_signal.c [PATCH] Initialize argument registers for 32bit signal handlers. [PATCH] Remove all traces of signal number conversion [PATCH] Don't synchronize time reading on single core AMD systems [PATCH] Remove outdated comment in x86-64 mmconfig code [PATCH] Use string instructions for Core2 copy/clear [PATCH] x86: - restore i8259A eoi status on resume [PATCH] i386: Split multi-line printk in oops output. ...
2006-09-26[PATCH] i386: Detect clock skew during suspendRafael J. Wysocki
Detect the situations in which the time after a resume from disk would be earlier than the time before the suspend and prevent them from happening on i386. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: John Stultz <johnstul@us.ibm.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] Change the name of pagedir_nosaveRafael J. Wysocki
The name of the pagedir_nosave variable does not make sense any more, so it seems reasonable to change it to something more meaningful. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] mtrr: Add lock annotations for prepare_set and post_setJosh Triplett
The functions prepare_set and post_set in kernel/cpu/mtrr/generic.c wrap the spinlock set_atomicity_lock: prepare_set returns with the lock held, and post_set releases the lock without acquiring it. Add lock annotations to these two functions so that sparse can check callers for lock pairing, and so that sparse will not complain about these functions since they intentionally use locks in this manner. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] i386: Kill references to xtimejohn stultz
Remove all references to xtime in i386 and replace them w/ get/set_timeofday(). Requires some ugly and uncertain changes to APM, but has been lightly tested to work. Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] Voyager: tty lockingAlan Cox
Voyager fiddles with current->signal.tty without locking. It turns out that the code in question has already cleared current->signal.tty correctly because daemonize() does the right thing already. The signal handling also appears to be incorrect as it does an unprotected sigfillset that also appears unneccessary. As I don't have a bowtie and am therefore not a qualified voyager maintainer I leave that to James. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] smp_call_function_single() cleanupAndrew Morton
If we're going to implement smp_call_function_single() on three architecture with the same prototype then it should have a declaration in a non-arch-specific header file. Move it into <linux/smp.h>. Cc: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] i386: add smp_call_function_singleStephane Eranian
Continiung the series of small patches necessary for the perfmon subsystem, here is a patch that adds support for the smp_call_function_single() function for i386. It exists for almost all other architectures but i386. The perfmon subsystem needs it in one case to free some state on a designated remote CPU. Signed-off-by: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: remove unused include from efi_stub.SRusty Russell
Remove unnecessary include from efi_stub.S Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: enable VMSPLIT for highmem kernelsDave Hansen
The current VMSPLIT Kconfig option is disabled whenever highmem is on. This is a bit screwy because the people who need to change VMSPLIT the most tend to be the ones with highmem and constrained lowmem. So, remove the highmem dependency. But, re-include the dependency for the "full 1GB of lowmem" option. You can't have the full 1GB of lowmem and highmem because of the need for the vmalloc(), kmap(), etc... areas. I thought there would be at least a bit of tweaking to do to get it to work, but everything seems OK. Boot tested on a 4GB x86 machine, and a 12GB 3-node NUMA-Q: elm3b82:~# cat /proc/meminfo MemTotal: 3695412 kB MemFree: 3659540 kB ... LowTotal: 2909008 kB LowFree: 2892324 kB ... elm3b82:~# zgrep PAE /proc/config.gz CONFIG_X86_PAE=y larry:~# cat /proc/meminfo MemTotal: 11845900 kB MemFree: 11786748 kB ... LowTotal: 2855180 kB LowFree: 2830092 kB Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: put .note.* sections into a PT_NOTE segment in vmlinuxJeremy Fitzhardinge
This patch will pack any .note.* section into a PT_NOTE segment in the output file. To do this, we tell ld that we need a PT_NOTE segment. This requires us to start explicitly mapping sections to segments, so we also need to explicitly create PT_LOAD segments for text and data, and map the sections to them appropriately. Fortunately, each section will default to its previous section's segment, so it doesn't take many changes to vmlinux.lds.S. This only changes i386 for now, but I presume the corresponding changes for other architectures will be as simple. This change also adds <linux/elfnote.h>, which defines C and Assembler macros for actually creating ELF notes. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: add a bootparameter to reserve high linear address spaceZachary Amsden
Add a boot parameter to reserve high linear address space for hypervisors. This is necessary to allow dynamically loaded hypervisor modules, which might not happen until userspace is already running, and also provides a useful tool to benchmark the performance impact of reduced lowmem address space. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: make __FIXADDR_TOP variable to allow it to make space for a ↵Jeremy Fitzhardinge
hypervisor Make __FIXADDR_TOP a variable, so that it can be set to not get in the way of address space a hypervisor may want to reserve. Original patch by Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] x86: remove locally-defined ldt structure in favour of standard typeRusty Russell
arch/i386/kernel/reboot.c defines its own struct to describe an ldt entry: it should use struct Xgt_desc_struct (currently load_ldt is a macro, so doesn't complain: paravirt patches make it warn). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] apm: clean up module initalizationNeil Horman
Clean up module initalization for apm.c. I had started by auditing for proper return code checks in misc_register, but I found that in the event of an initalization failure, a proc file and a kernel thread were left hanging out. this patch properly cleans up those loose ends on any initalization failure. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] i386: show_registers(): try harder to print failing codeChuck Ebbert
show_registers() tries to dump failing code starting 43 bytes before the offending instruction, but this address can be bad, for example in a device driver where the failing instruction is less than 43 bytes from the start of the driver's code. When that happens, try to dump code starting at the failing instruction instead of printing no code at all. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Andi Kleen <ak@muc.de> Cc: Keith Owens <kaos@ocs.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] hpet rtc emulation: add watchdog timerClemens Ladisch
To prevent the emulated RTC timer from stopping when interrupts are delayed for too long, disable interrupts around all of the register initialization, and check that the interrupt handler did not schedule the next interrupt in the past. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] NUMA: Add zone_to_nid functionChristoph Lameter
There are many places where we need to determine the node of a zone. Currently we use a difficult to read sequence of pointer dereferencing. Put that into an inline function and use throughout VM. Maybe we can find a way to optimize the lookup in the future. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] ZVC: Support NR_SLAB_RECLAIMABLE / NR_SLAB_UNRECLAIMABLEChristoph Lameter
Remove the atomic counter for slab_reclaim_pages and replace the counter and NR_SLAB with two ZVC counter that account for unreclaimable and reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE. Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE. The intend seems to be to check for slab pages that could be freed. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] reduce MAX_NR_ZONES: fix i386 SRAT check for MAX_NR_ZONESChristoph Lameter
We cannot check MAX_NR_ZONES since it not defined in the preprocessor anymore. So remove the check. The maximum number of zones per node for i386 is 3 since i386 does not support ZONE_DMA32. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] reduce MAX_NR_ZONES: fix MAX_NR_ZONES array initializationsChristoph Lameter
Fix array initialization in lots of arches The number of zones may now be reduced from 4 to 2 for many arches. Fix the array initialization for the zones array for all architectures so that it is not initializing a fixed number of elements. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] reduce MAX_NR_ZONES: remove two strange uses of MAX_NR_ZONESChristoph Lameter
I keep seeing zones on various platforms that are never used and wonder why we compile support for them into the kernel. Counters show up for HIGHMEM and DMA32 that are alway zero. This patch allows the removal of ZONE_DMA32 for non x86_64 architectures and it will get rid of ZONE_HIGHMEM for arches not using highmem (like 64 bit architectures). If an arch does not define CONFIG_HIGHMEM then ZONE_HIGHMEM will not be defined. Similarly if an arch does not define CONFIG_ZONE_DMA32 then ZONE_DMA32 will not be defined. No current architecture uses all the 4 zones (DMA,DMA32,NORMAL,HIGH) that we have now. The patchset will reduce the number of zones for all platforms. On many platforms that do not have DMA32 or HIGHMEM this will reduce the number of zones by 50%. F.e. ia64 only uses DMA and NORMAL. Large amounts of memory can be saved for larger systemss that may have a few hundred NUMA nodes. With ZONE_DMA32 and ZONE_HIGHMEM support optional MAX_NR_ZONES will be 2 for many non i386 platforms and even for i386 without CONFIG_HIGHMEM set. Tested on ia64, x86_64 and on i386 with and without highmem. The patchset consists of 11 patches that are following this message. One could go even further than this patchset and also make ZONE_DMA optional because some platforms do not need a separate DMA zone and can do DMA to all of memory. This could reduce MAX_NR_ZONES to 1. Such a patchset will hopefully follow soon. This patch: Fix strange uses of MAX_NR_ZONES Sometimes we use MAX_NR_ZONES - x to refer to a zone. Make that explicit. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] convert i386 NUMA KVA space to bootmemkeith mannthey
Address a long standing issue of booting with an initrd on an i386 numa system. Currently (and always) the numa kva area is mapped into low memory by finding the end of low memory and moving that mark down (thus creating space for the kva). The issue with this is that Grub loads initrds into this similar space so when the kernel check the initrd it finds it outside max_low_pfn and disables it (it thinks the initrd is not mapped into usable memory) thus initrd enabled kernels can't boot i386 numa :( My solution to the problem just converts the numa kva area to use the bootmem allocator to save it's area (instead of moving the end of low memory). Using bootmem allows the kva area to be mapped into more diverse addresses (not just the end of low memory) and enables the kva area to be mapped below the initrd if present. I have tested this patch on numaq(no initrd) and summit(initrd) i386 numa based systems. [akpm@osdl.org: cleanups] Signed-off-by: Keith Mannthey <kmannth@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[PATCH] i386/x86-64: New Intel feature flagsDave Jones
Add supplemental SSE3 instructions flag, and Direct Cache Access flag. As described in "Intel Processor idenfication and the CPUID instruction AP485 Sept 2006" AK: also added for x86-64 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] x86: Add a cumulative thermal throttle event counter.Dmitriy Zavin
The counter is exported to /sys that keeps track of the number of thermal events, such that the user knows how bad the thermal problem might be (since the logging to syslog and mcelog is rate limited). AK: Fixed cpu hotplug locking Signed-off-by: Dmitriy Zavin <dmitriyz@google.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386: Make the jiffies compares use the 64bit safe macros.Dmitriy Zavin
Signed-off-by: Dmitriy Zavin <dmitriyz@google.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] x86: Refactor thermal throttle processingDmitriy Zavin
Refactor the event processing (syslog messaging and rate limiting) into separate file therm_throt.c. This allows consistent reporting of CPU thermal throttle events. After ACK'ing the interrupt, if the event is current, the user (p4.c/mce_intel.c) calls therm_throt_process to log (and rate limit) the event. If that function returns 1, the user has the option to log things further (such as to mce_log in x86_64). AK: minor cleanup Signed-off-by: Dmitriy Zavin <dmitriyz@google.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing ↵Andi Kleen
conf1 Some buggy systems can machine check when config space accesses happen for some non existent devices. i386/x86-64 do some early device scans that might trigger this. Allow pci=noearly to disable this. Also when type 1 is disabling also don't do any early accesses which are always type1. This moves the pci= configuration parsing to be a early parameter. I don't think this can break anything because it only changes a single global that is only used by PCI. Cc: gregkh@suse.de Cc: Trammell Hudson <hudson@osresearch.net> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] x86: Move direct PCI scanning functions out of lineAndi Kleen
Saves about 200 bytes of code space. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCIAndi Kleen
This is useful on systems with broken PCI bus. Affects various scans in x86-64 and i386's early ACPI quirk scan. Cc: gregkh@suse.de Cc: len.brown@intel.com Cc: Trammell Hudson <hudson@osresearch.net> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinderJan Beulich
Current gcc generates calls not jumps to noreturn functions. When that happens the return address can point to the next function, which confuses the unwinder. This patch works around it by marking asynchronous exception frames in contrast normal call frames in the unwind information. Then teach the unwinder to decode this. For normal call frames the unwinder now subtracts one from the address which avoids this problem. The standard libgcc unwinder uses the same trick. It doesn't include adjustment of the printed address (i.e. for the original example, it'd still be kernel_math_error+0 that gets displayed, but the unwinder wouldn't get confused anymore. This only works with binutils 2.6.17+ and some versions of H.J.Lu's 2.6.16 unfortunately because earlier binutils don't support .cfi_signal_frame [AK: added automatic detection of the new binutils and wrote description] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] x86: - restore i8259A eoi status on resumeMatthew Garrett
Got it. i8259A_resume calls init_8259A(0) unconditionally, even if auto_eoi has been set. Keep track of the current status and restore that on resume. This fixes it for AMD64 and i386. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386: Split multi-line printk in oops output.Dave Jones
Sometimes, bug reports come in where we've had an oops, and the only record we have is what the reporter saw on screen shortly before the system locked up completely. Unfortunatly, syslog only prints lines beginning with KERN_EMERG to the console, so some lines get lost. An example of this can be seen at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=203723 Some of this information isn't vital to diagnosis, but some parts are useful, such as the tainted flag. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386: Add MMCFG resources to i386 tooAndi Kleen
Following earlier x86-64 patch Cc: gregkh@suse.de Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386/x86-64: Only do MCFG e820 check when type 1 worksAndi Kleen
Needs earlier patch to split type 1 probing from use. This patch should fix the x86 macs where type 1 PCI config space access doesn't work, but MCFG does. They also don't have a usable e820 table so the e820 sanity check failed. Instead assume now that if type 1 doesn't work then MCFG must work and don't do the e820 check. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386/x86-64: PCI: split probing and initialization of type 1 config ↵Andi Kleen
space access First probe if type1/2 accesses work, but then only initialize them at the end. This is useful for a later patch that needs this information inbetween. Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386: Remove experimental mark of kexecEric W. Biederman
kexec has been marked experimental for a year now and all of the serious problems have been worked through. So it is time (if not past time) to remove the experimental mark. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-09-26[PATCH] i386: add HPET(s) into resource mapadurbin@google.com
Add HPET(s) into resource map. This will allow for the HPET(s) to be visibile within /proc/iomem. Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Andi Kleen <ak@suse.de>